scruti-documents/electrical-scrutineering/electrical-scrutineering.tex
2025-06-06 23:12:15 +02:00

152 lines
7.4 KiB
TeX
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

\documentclass{article}
\usepackage[utf8]{inputenc}
\usepackage[a4paper, margin=2cm]{geometry}
\usepackage{siunitx}
\sisetup{
group-separator = {.},
input-decimal-markers={.},
output-decimal-marker = {.},
group-minimum-digits=9}
\usepackage{graphicx}
\usepackage{fancyhdr}
\usepackage{lastpage}
\usepackage{subfigure}
\usepackage{float}
\usepackage{wrapfig}
\usepackage{multicol}
\usepackage{amsmath, amssymb}
\usepackage{hyperref}
\usepackage{pdfpages}
\hyphenpenalty=10000 %to stop cutting words in a paragraph
\setcounter{secnumdepth}{3}
\pagestyle{fancy}
\fancyhf{}
\rhead{\includegraphics*[scale=0.013]{./Pictures/FaSTTUBe_Logo_ohneAuto.png}}
\lhead{Car 313, 01.06, Rev. 0}
\chead{\large Electrical Scrutineering}
\begin{document}
\vspace*{\fill}
\begin{center}
\rotatebox{90}{\scalebox{12}{Electrical}}
\hspace{2cm} % Adjust this space as needed
\rotatebox{90}{\scalebox{12}{Scrutineering}}
\end{center}
\vspace*{\fill}
\tableofcontents
% addtotoc={〈page number 〉,〈section 〉,〈level 〉,〈heading 〉,〈label 〉}
%〈page number 〉: Page number of the inserted page.
%〈section〉: LATEX sectioning name e.g., section, subsection, . . .
%〈level 〉: Number, denoting depth of section e.g., section=1, subsection=2, . . .
%〈heading〉: Title inserted in the table of contents.
%〈label 〉: Name of the label. This label can be referred to with \ref and \pageref
\vspace*{\fill}
\begin{center}
\rotatebox{90}{\scalebox{11.8}{BSPD}}
\end{center}
\vspace*{\fill}
\addtocounter{section}{1}
\addcontentsline{toc}{section}{\protect\numberline{\thesection}Brake System Plausiblity Device}
\includepdf[pages=-, link, addtotoc={1, subsection, 2, Schematic, BSPD}, angle=90]{./bspd/FT25_BSPD.pdf}
\includepdf[pages=-, link, addtotoc={1, subsection, 2, BPS, BPS}]{./bspd/BPS ADZ SME 200bar.pdf}
\includepdf[pages=-, link, addtotoc={1, subsection, 2, BPS, PVG1}]{./bspd/SDC Photorelay PVG612A.pdf}
\includepdf[pages=-, link, addtotoc={1, subsection, 2, BPS, STROMSENSOR}]{./bspd/Stromsensor HO 50-S-0100.pdf}
% hello world
\vspace*{\fill}
\begin{center}
\rotatebox{90}{\scalebox{11.8}{HVB}}
\end{center}
\vspace*{\fill}
\setcounter{subsection}{0}
\addtocounter{section}{1}
\addcontentsline{toc}{section}{\protect\numberline{\thesection}High Voltage Box}
\includepdf[pages=-, link, addtotoc={1, subsection, 2, Schematic, DC}, angle=90]{./hvb/dc/DC.pdf}
\includepdf[pages=-, link, addtotoc={1, subsection, 2, BPS, BPS}]{./hvb/dc/Optocoupler 140356145200.pdf}
\includepdf[pages=-, link, addtotoc={1, subsection, 2, BPS, PRE-PTC}]{./hvb/dc/Precharge PTC PTCEL13R251RBE.pdf}
\includepdf[pages=-, link, addtotoc={1, subsection, 2, BPS, PRE-REL}]{./hvb/dc/Precharge Relay STB10LN80K5.pdf}
\includepdf[pages=-, link, addtotoc={1, subsection, 2, BPS, LED-DRIVER}]{./hvb/dc/TSAL driver IS32LT3178.pdf}
\includepdf[pages=-, link, addtotoc={1, subsection, 2, BPS, STROMSENSOR}]{./hvb/Stromsensor HO 50-S-0100.pdf}
\includepdf[pages=-, link, addtotoc={1, subsection, 2, BPS, STROMSENSOR}]{./hvb/Body Protection Resistor.pdf}
\includepdf[pages=-, link, addtotoc={1, subsection, 2, BPS, }]{./hvb/HV Kabel Grün RS PRO 8724476.pdf}
\includepdf[pages=-, link, addtotoc={1, subsection, 2, BPS, HVD}]{./hvb/HVD EM30MSD-A(04).pdf}
\vspace*{\fill}
\begin{center}
\rotatebox{90}{\scalebox{11.8}{AMS}}
\hspace{2cm} % Adjust this space as needed
\rotatebox{90}{\scalebox{11.8}{Master}}
\end{center}
\vspace*{\fill}
\setcounter{subsubsection}{0}
\addtocounter{subsection}{1}
\addcontentsline{toc}{subsection}{\protect\numberline{\thesection}AMS Master}
\includepdf[pages=-, link, addtotoc={1, subsubsection, 2, Schematic, AMS-MASTER}, angle=90]{./front-comp/ams-master/Schematic.pdf}
\includepdf[pages={1-3}, link, addtotoc={1, subsubsection, 2, 1A Fuse Type 0ACJ, HV-FUSE-1}]{./front-comp/ams-master/1A Fuse Type 0ACJ.pdf}
\includepdf[pages={1,6,11}, link, addtotoc={1, subsubsection, 2, DCDC Isolator 18024215401L, DCDC-ISO}]{./front-comp/ams-master/DCDC Isolator 18024215401L.pdf}
\includepdf[pages={1,8}, link, addtotoc={1, subsubsection, 2, MMNL, MMNL}]{./front-comp/ams-master/MMNL.pdf}
\includepdf[pages={1,2}, link, addtotoc={1, subsubsection, 2, Optocoupler 140356145200, OPTO-1}, angle=90]{./front-comp/ams-master/Optocoupler 140356145200.pdf}
\includepdf[pages={1,2,4-6}, link, addtotoc={1, subsubsection, 2, Precharge PTC PTCEL13R501RBE , PTC-1}]{./front-comp/ams-master/Precharge PTC PTCEL13R501RBE .pdf}
\includepdf[pages={1-5,7-8}, link, addtotoc={1, subsubsection, 2, Precharge Relay 104-1-A-24-5D, PRE-RELAY}]{./front-comp/ams-master/Precharge Relay 104-1-A-24-5D.pdf}
\includepdf[pages={1,3-6}, link, addtotoc={1, subsubsection, 2, SDC discharge MOSFET STB10LN80K5, SDC-DIS-MOS}]{./front-comp/ams-master/SDC discharge MOSFET STB10LN80K5.pdf}
\includepdf[pages={1-3}, link, addtotoc={1, subsubsection, 2, SDC Photorelay PVG612A, PVG}]{./front-comp/ams-master/SDC Photorelay PVG612A.pdf}
\includepdf[pages={1-2}, link, addtotoc={1, subsubsection, 2, SPI Isolator ESMIT-4180, SPI_ISO}]{./front-comp/ams-master/SPI Isolator ESMIT-4180.pdf}
%\includepdf[pages={1-6}, link, addtotoc={1, subsubsection, 2, Sumida PS15-195, TRAFO-1}]{./front-comp/ams-master/Sumida PS15-195.pdf}
\includepdf[pages={1,3-4}, link, addtotoc={1, subsubsection, 2, Sumida Approval PS15-195, TRAFO-2}]{./front-comp/ams-master/Sumida Approval PS15-195.pdf}
\vspace*{\fill}
\begin{center}
\rotatebox{90}{\scalebox{11.8}{TS}}
\hspace{2cm} % Adjust this space as needed
\rotatebox{90}{\scalebox{11.8}{DC-DC}}
\end{center}
\vspace*{\fill}
\addtocounter{subsubsection}{1}
\setcounter{subsubsection}{0}
\addtocounter{subsection}{1}
\addcontentsline{toc}{subsection}{\protect\numberline{\thesection}TS-DCDC}
\includepdf[pages=-, link, addtotoc={1, subsubsection, 2, Schematic, TS-DCDC}, angle=90]{./front-comp/dcdc/Schematic.pdf}
\includepdf[pages={1-3}, link, addtotoc={1, subsubsection, 2, PH600A280-24, TDK}]{./front-comp/dcdc/DCDC PH600A280-24.pdf}
\includepdf[pages={1-3}, link, addtotoc={1, subsubsection, 2, Giga MOSFET IPW60R045CPA, G-MOS}]{./front-comp/dcdc/Giga MOSFET IPW60R045CPA.pdf}
\includepdf[pages={1-2}, link, addtotoc={1, subsubsection, 2, HV Fuse 0AcG-2500-TE, HV-FUSE-2}]{./front-comp/dcdc/HV Fuse 0AcG-2500-TE.pdf}
\includepdf[pages={1,2,5}, link, addtotoc={1, subsubsection, 2, LV HV caps VY1471M29Y5UC63V0, HV-CAP}]{./front-comp/dcdc/LV HV caps VY1471M29Y5UC63V0.pdf}
\includepdf[pages={1-3}, link, addtotoc={1, subsubsection, 2, Molex Megafit 768250004, MFIT}]{./front-comp/dcdc/Molex Megafit 768250004.pdf}
\includepdf[pages={1,2}, link, addtotoc={1, subsubsection, 2, Optocoupler 140356145200, OPTO-2}, angle=90]{./front-comp/dcdc/Optocoupler 140356145200.pdf}
\includepdf[pages={1-3}, link, addtotoc={1, subsubsection, 2, Reverse Polarity Diode STTH25M06, RPP}]{./front-comp/dcdc/Reverse Polarity Diode STTH25M06.pdf}
\vspace*{\fill}
\begin{center}
\rotatebox{90}{\scalebox{11.8}{Accumulator}}
\hspace{2cm} % Adjust this space as needed
\rotatebox{90}{\scalebox{11.8}{Mechanical}}
\end{center}
\vspace*{\fill}
\addtocounter{section}{3}
\addcontentsline{toc}{section}{\protect\numberline{\thesection}Accumulator Mechanical}
\renewcommand\refname{Reference}
\bibliographystyle{plain}
\begin{thebibliography}{00}
\bibitem{air_datasheet} \textit{TE ECK100BH5AAA Datasheet}. \href{https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Data+Sheet%7FECK100B_Datasheet%7F3%7Fpdf%7FEnglish%7FENG_DS_ECK100B_Datasheet_3.pdf%7F2071583-1}{www.te.com}, 11.2024
\end{thebibliography}
\end{document}