FaSTTUBe/scruti-documents
56
0
Fork 0
Code Issues 1 Pull Requests Actions Packages Projects Releases Wiki Activity

formating

Browse Source
This commit is contained in:
Johnny Hsu 2025-03-23 01:47:33 +01:00
parent 372e2f3c6f
commit fd6f4d4b71
2 changed files with 1 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

BIN
ibutton-cooling-sim/cooling-sim.pdf
View File

Binary file not shown.

1
ibutton-cooling-sim/cooling-sim.tex
View File

@ -31,6 +31,7 @@
\hfill \break
The cold plate is simulated in Star-CCM+. There are 3 regions: the fluid, the cold plate and the heat transfer pad. The assumption is an input temperature of 38°C at a mass flow rate of 0.125 kg/s. The simulation is performed in a symmetry setup. The outlet of the fluid is a pressure outlet. The cells are impressed on predetermined areas on the heat transfer pad via a heat source of 500W. The inlet of the fluid is located at the bottom right, the outlet of the fluid at the top right.
The hottest cell is located at the top left, as shown in the picture. The hottest cell reaches a temperature of 41.3°C. The reason why the hottest point is at this position is that the fluid is already heated by the previous cells, the flow velocity is very low as the flow is against gravity and only a small area of the cell surface is in direct contact with the fluid.
\begin{figure}[H]