changed the label vref2 to vref
This commit is contained in:
parent
9e95b809c9
commit
35f35346d0
Binary file not shown.
@ -48,7 +48,7 @@ The output voltage is then passed through an RC filter before being fed to an AD
|
||||
To estimate the error, we calculate the highest possible measured voltage at \SI{60}{\celsius}.
|
||||
According to the design of the voltage divider, the lower the temperature, the higher the output voltage.
|
||||
|
||||
As shown in Fig. \ref{fig:vref2}, the supply voltage $V_{REF2}$ for the voltage divider can reach a maximum value of \SI{3.006}\volt.
|
||||
As shown in Fig. \ref{fig:vref}, the supply voltage $V_{REF2}$ for the voltage divider can reach a maximum value of \SI{3.006}\volt.
|
||||
Additionally, the total measurement error of the GPIO is $\pm\SI{0.0028}{\volt}$ (as shown in Fig. \ref{fig:aux}).
|
||||
Lastly, the maximum resistance of the NTC at \SI{60}{\celsius}, according to the LUT (Tab. \ref{tab:lut}), is \SI{3086.8}{\ohm}.
|
||||
The maximum possible voltage measurement can then be calculated as such:
|
||||
@ -73,7 +73,7 @@ Since the LUT is used to match the voltage to the temperature, and the nominal r
|
||||
\centering
|
||||
\includegraphics[width=\textwidth]{./Pictures/Table 5. Voltage Reference Specifications.png}
|
||||
\caption{Voltage Reference Specifications}
|
||||
\label{fig:vref2}
|
||||
\label{fig:vref}
|
||||
\end{figure}
|
||||
|
||||
\begin{figure}[H]
|
||||
|
Loading…
x
Reference in New Issue
Block a user