FaSTTUBe/scruti-documents
56
0
Fork 0
Code Issues 1 Pull Requests Actions Packages Projects Releases Wiki Activity

tsal change

Browse Source
This commit is contained in:
Johnny Hsu 2025-04-28 20:37:01 +02:00
parent 4156b72ecf
commit 3239f6cc12
4 changed files with 20 additions and 19 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

BIN
SDC-schematic/SDC-schematic.pdf
View File

Binary file not shown.

2
SDC-schematic/SDC-schematic.tex
View File

@ -37,7 +37,7 @@
\includepdf[pages=-]{./Documents/PDU_SDC.pdf}
\section*{AMS \& IMD latching}
The latching is achieved with the MC14013BDG flip-flop. It can only be resetted by the AMS reset button in the error state. (the Reset\_Button\_In and Reset\_Button\_Out comes directly from the button located on the side of the car.)
The latching is achieved with the MC14013BDG flip-flop. It can only be resetted by the AMS reset button in the error state. (the \texttt{Reset\_Button\_In} and \texttt{Reset\_Button\_Out} comes directly from the button located on the side of the car.)
\section*{Current Consumption}
To calculate the current consumption, the load on the shutdown circuit must first be identified. As seen in the SDC schematic, the load consists of the AIRs, precharge relay, EBS Relay and the Discharge Circuit.

BIN
TSAL-schematic/TSAL-schematic.pdf
View File

Binary file not shown.

13
TSAL-schematic/TSAL-schematic.tex
View File

@ -93,18 +93,19 @@
Both signals are transmitted every 50 ms over the CAN bus. If the Dashboard does not receive a CAN message from the AMS Master within 150 ms,
it will trigger a fault condition. In response to this fault, the following LEDs will be activated:
the \texttt{AMS Error} LED will be turned on, the \texttt{IMD Error} LED will be turned on, and the \texttt{TS Off} LED will remain off.
\pageref{sec:io}
\includepdf[pages={1}, landscape=true]{./Documents/TS-overview.pdf}
% \includepdf[pages={1}, landscape=true]{./Documents/TS-overview.pdf}
\hypertarget{ams-io}{}
\includepdf[pages={9}, landscape=true]{./Documents/Master_FT25.pdf}
\hypertarget{ams-sdc}{}
\includepdf[pages={8}, landscape=true]{./Documents/Master_FT25.pdf}
\hypertarget{ams-mcu}{}
\includepdf[pages={3}, landscape=true]{./Documents/Master_FT25.pdf}
\includepdf[pages={8,5,15,2,11,12,14}, landscape=true]{./Documents/Master_FT25.pdf}
% \hypertarget{ams-mcu}{}
%\includepdf[pages={3}, landscape=true]{./Documents/Master_FT25.pdf}
\includepdf[pages={5,15,2,11,12,14}, landscape=true]{./Documents/Master_FT25.pdf}
\includepdf[landscape=true]{./Documents/dashboard-FT25.pdf}
\includepdf[pages={2}, landscape=true]{./Documents/TS-overview.pdf}
\label{sec:io}
% \includepdf[pages={2}, landscape=true]{./Documents/TS-overview.pdf}
\includepdf[landscape=true]{./Documents/DC.pdf}
\end{document}