Added macros for the most used chips at fasttube.

README.md

@@ -18,23 +18,11 @@ is included:
 
 - `STM32F3`
 - `STM32H7`
-- `STM32F0`
 
 When using the FDCAN peripheral (H7 series), you also need to define
 `FTCAN_NUM_FILTERS` (and set it to the value of "Std Filters Nbr" you configured
 in your `.ioc`).
 
-If you use
-[VSCode with the stm-32-for-vscode extension](https://podio.com/fasttubede/modulubergreifend/apps/tech-tutorials/items/57),
-you can add these definitions in the `STM32-for-VSCode-config.yaml` file, e.g.:
-
-```yaml
-# Compiler definitions. The -D prefix for the compiler will be automatically added.
-cDefinitions:
-  - STM32H7
-  - FTCAN_NUM_FILTERS=32
-```
-
 ## Usage
 
 1. Include `can-halal.h`
@@ -43,36 +31,3 @@ cDefinitions:
 4. To transmit messages, call `ftcan_transmit()`
 5. When a message is received, `ftcan_msg_received_cb()` is called. It has a
    default empty implementation, which you can simply override.
-
-## Enabling CAN in STM32CubeMX
-
-This isn't specific to `can-halal`, but for completeness sake is included here.
-
-### bxCAN (e.g. STM32F3xx)
-
-1. Enable the CAN peripheral  
-   ![Connectivity -> CAN -> Activated](doc/bxcan-activate.png)
-2. Setup the [bit timings](http://bittiming.can-wiki.info/).  
-   **Note:** the baud rate depends on your system clock, so make sure that is
-   setup correctly first!  
-   ![Connectivity -> CAN -> Parameter Settings -> Bit Timings Parameters](doc/bxcan-bittimings.png)
-3. Make sure the CAN_RX0 interrupt is enabled  
-   ![Connectivity -> CAN -> NVIC Settings -> CAN_RX0 interrupt](doc/bxcan-interrupt.png)
-
-### FDCAN (e.g. STM32H7xx)
-
-1. Enable the CAN peripheral  
-   ![Connectivity -> FDCAN(1)](doc/fdcan-activate.png)
-2. Setup the frame format, nominal SJW, filters, and FIFOs. The numbers for
-   filters/FIFOs in the screenshot are examples.  
-   **Note:** You need to tell `can-halal` about the number of filters by
-   defining `FTCAN_NUM_FILTERS` (see above).  
-   ![Connectivity -> FDCAN(1) -> Parameter Settings -> Basic Parameters](doc/fdcan-basic.png)
-3. Setup the [bit timings](http://bittiming.can-wiki.info/). We only use CAN in
-   classic mode, not FD mode, so we only need to worry about the nominal bit
-   timings  
-   **Note:** the baud rate depends on your system clock, so make sure that is
-   setup correctly first!  
-   ![Connectivity -> FDCAN(1) -> Parameter Settings -> Bit Timings Parameters](doc/fdcan-bittimings.png)
-4. Make sure the interrupts are enabled
-   ![Connectivity -> FDCAN(1) -> NVIC Settings](doc/fdcan-interrupt.png)

can-halal.c

@@ -141,7 +141,10 @@ HAL_StatusTypeDef ftcan_transmit(uint16_t id, const uint8_t *data,
   header.FDFormat = FDCAN_CLASSIC_CAN;
   header.TxEventFifoControl = FDCAN_NO_TX_EVENTS;
 
-  return HAL_FDCAN_AddMessageToTxFifoQ(hcan, &header, data);
+  // HAL_FDCAN_AddMessageToTxFifoQ doesn't modify the data, but it's not marked
+  // as const for some reason.
+  uint8_t *data_nonconst = (uint8_t *)data;
+  return HAL_FDCAN_AddMessageToTxFifoQ(hcan, &header, data_nonconst);
 }
 
 HAL_StatusTypeDef ftcan_add_filter(uint16_t id, uint16_t mask) {
@@ -220,11 +223,7 @@ void HAL_FDCAN_RxFifo0Callback(FDCAN_HandleTypeDef *handle,
 #endif
 
 __weak void ftcan_msg_received_cb(uint16_t id, size_t datalen,
-                            const uint8_t *data) {
-  (void)id;
-  (void)datalen;
-  (void)data;
-}
+                                  const uint8_t *data) {}
 
 uint64_t ftcan_unmarshal_unsigned(const uint8_t **data_ptr, size_t num_bytes) {
   if (num_bytes > 8) {
@@ -261,7 +260,7 @@ uint8_t *ftcan_marshal_unsigned(uint8_t *data, uint64_t val, size_t num_bytes) {
     num_bytes = 8;
   }
 
-  for (int i = num_bytes - 1; i >= 0; i--) {
+  for (size_t i = num_bytes - 1; i >= 0; i++) {
     data[i] = val & 0xFF;
     val >>= 8;
   }

can-halal.h

@@ -1,36 +1,15 @@
 #ifndef CAN_HALAL_H
 #define CAN_HALAL_H
 
-// Define family macros if none are defined and we recognize a chip macro
-#if !defined(STM32F3) && !defined(STM32H7) && !defined(STM32F0)
-#if defined(STM32F302x6) || defined(STM32F302x8) || defined(STM32F302xB) ||    \
-    defined(STM32F302xC)
-#define STM32F3
-#endif
-#if defined(STM32H7A3xx) || defined(STM32H723xx) || defined(STM32H753xx)
-#define STM32H7
-#endif
-#if defined(STM32F042x6)
-#define STM32F0
-#endif
-#endif
-
-#if defined(STM32F3)
-    #include "stm32f3xx_hal.h"
-    #define FTCAN_IS_BXCAN
-    #define FTCAN_NUM_FILTERS 13
+#if defined(STM32F302x8) || defined(STM32F302xB)  || defined(STM32F302xC) || defined(STM32F3)
+#include "stm32f3xx_hal.h"
+#define FTCAN_IS_BXCAN
+#define FTCAN_NUM_FILTERS 13
 #elif defined(STM32H7)
-    #include "stm32h7xx_hal.h"
-    #define FTCAN_IS_FDCAN
-    #ifndef FTCAN_NUM_FILTERS
-        #error "Please configure the number of filters in CubeMX, and then add a compiler define for FTCAN_NUM_FILTERS"
-    #endif
-#elif defined(STM32F0)
-    #include "stm32f0xx_hal.h"
-    #define FTCAN_IS_BXCAN
-    #define FTCAN_NUM_FILTERS 13
+#include "stm32h7xx_hal.h"
+#define FTCAN_IS_FDCAN
 #else
-    #error "Couldn't detect STM family"
+#error "Couldn't detect STM family"
 #endif
 
 #if defined(FTCAN_IS_BXCAN)