Add LED for WD status, update IOC, adjust ADC parameters
This commit is contained in:
File diff suppressed because one or more lines are too long
@ -51,7 +51,7 @@
|
||||
/*#define HAL_CRYP_MODULE_ENABLED */
|
||||
/*#define HAL_DAC_MODULE_ENABLED */
|
||||
/*#define HAL_I2S_MODULE_ENABLED */
|
||||
#define HAL_IWDG_MODULE_ENABLED
|
||||
/*#define HAL_IWDG_MODULE_ENABLED */
|
||||
/*#define HAL_LCD_MODULE_ENABLED */
|
||||
/*#define HAL_LPTIM_MODULE_ENABLED */
|
||||
/*#define HAL_RNG_MODULE_ENABLED */
|
||||
|
||||
160
Core/Src/main.c
160
Core/Src/main.c
@ -51,8 +51,6 @@ CAN_HandleTypeDef hcan;
|
||||
|
||||
I2C_HandleTypeDef hi2c1;
|
||||
|
||||
IWDG_HandleTypeDef hiwdg;
|
||||
|
||||
TIM_HandleTypeDef htim2;
|
||||
TIM_HandleTypeDef htim3;
|
||||
TIM_HandleTypeDef htim6;
|
||||
@ -75,7 +73,6 @@ static void MX_TIM3_Init(void);
|
||||
static void MX_I2C1_Init(void);
|
||||
static void MX_USART1_UART_Init(void);
|
||||
static void MX_TIM6_Init(void);
|
||||
//static void MX_IWDG_Init(void);
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
@ -133,7 +130,6 @@ int main(void)
|
||||
MX_I2C1_Init();
|
||||
MX_USART1_UART_Init();
|
||||
MX_TIM6_Init();
|
||||
//MX_IWDG_Init();
|
||||
/* USER CODE BEGIN 2 */
|
||||
// REMINDER: Comment out the IWDG Init above!!!
|
||||
|
||||
@ -193,6 +189,8 @@ int main(void)
|
||||
inhibit_SDC = 1;
|
||||
}
|
||||
|
||||
HAL_GPIO_WritePin(STATUS_LED4_GPIO_Port , STATUS_LED4_Pin , inhibit_SDC);
|
||||
|
||||
currentMonitor_checklimits(); // ob irgnwo ueberstrom getreten ist
|
||||
}
|
||||
/* USER CODE END 3 */
|
||||
@ -211,11 +209,10 @@ void SystemClock_Config(void)
|
||||
/** Initializes the RCC Oscillators according to the specified parameters
|
||||
* in the RCC_OscInitTypeDef structure.
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI|RCC_OSCILLATORTYPE_HSE;
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||||
RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
|
||||
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
||||
RCC_OscInitStruct.LSIState = RCC_LSI_ON;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL4;
|
||||
@ -276,15 +273,15 @@ static void MX_ADC1_Init(void)
|
||||
hadc1.Instance = ADC1;
|
||||
hadc1.Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIV1;
|
||||
hadc1.Init.Resolution = ADC_RESOLUTION_12B;
|
||||
hadc1.Init.ScanConvMode = ADC_SCAN_DISABLE;
|
||||
hadc1.Init.ScanConvMode = ADC_SCAN_ENABLE;
|
||||
hadc1.Init.ContinuousConvMode = DISABLE;
|
||||
hadc1.Init.DiscontinuousConvMode = DISABLE;
|
||||
hadc1.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
|
||||
hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START;
|
||||
hadc1.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_RISING;
|
||||
hadc1.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T6_TRGO;
|
||||
hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT;
|
||||
hadc1.Init.NbrOfConversion = 1;
|
||||
hadc1.Init.NbrOfConversion = 7;
|
||||
hadc1.Init.DMAContinuousRequests = ENABLE;
|
||||
hadc1.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
|
||||
hadc1.Init.EOCSelection = ADC_EOC_SEQ_CONV;
|
||||
hadc1.Init.LowPowerAutoWait = DISABLE;
|
||||
hadc1.Init.Overrun = ADC_OVR_DATA_OVERWRITTEN;
|
||||
if (HAL_ADC_Init(&hadc1) != HAL_OK)
|
||||
@ -312,6 +309,54 @@ static void MX_ADC1_Init(void)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/** Configure Regular Channel
|
||||
*/
|
||||
sConfig.Rank = ADC_REGULAR_RANK_2;
|
||||
if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/** Configure Regular Channel
|
||||
*/
|
||||
sConfig.Rank = ADC_REGULAR_RANK_3;
|
||||
if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/** Configure Regular Channel
|
||||
*/
|
||||
sConfig.Rank = ADC_REGULAR_RANK_4;
|
||||
if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/** Configure Regular Channel
|
||||
*/
|
||||
sConfig.Rank = ADC_REGULAR_RANK_5;
|
||||
if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/** Configure Regular Channel
|
||||
*/
|
||||
sConfig.Rank = ADC_REGULAR_RANK_6;
|
||||
if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/** Configure Regular Channel
|
||||
*/
|
||||
sConfig.Rank = ADC_REGULAR_RANK_7;
|
||||
if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN ADC1_Init 2 */
|
||||
|
||||
/* USER CODE END ADC1_Init 2 */
|
||||
@ -341,15 +386,15 @@ static void MX_ADC2_Init(void)
|
||||
hadc2.Instance = ADC2;
|
||||
hadc2.Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIV1;
|
||||
hadc2.Init.Resolution = ADC_RESOLUTION_12B;
|
||||
hadc2.Init.ScanConvMode = ADC_SCAN_DISABLE;
|
||||
hadc2.Init.ScanConvMode = ADC_SCAN_ENABLE;
|
||||
hadc2.Init.ContinuousConvMode = DISABLE;
|
||||
hadc2.Init.DiscontinuousConvMode = DISABLE;
|
||||
hadc2.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
|
||||
hadc2.Init.ExternalTrigConv = ADC_SOFTWARE_START;
|
||||
hadc2.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_RISING;
|
||||
hadc2.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T6_TRGO;
|
||||
hadc2.Init.DataAlign = ADC_DATAALIGN_RIGHT;
|
||||
hadc2.Init.NbrOfConversion = 1;
|
||||
hadc2.Init.NbrOfConversion = 7;
|
||||
hadc2.Init.DMAContinuousRequests = ENABLE;
|
||||
hadc2.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
|
||||
hadc2.Init.EOCSelection = ADC_EOC_SEQ_CONV;
|
||||
hadc2.Init.LowPowerAutoWait = DISABLE;
|
||||
hadc2.Init.Overrun = ADC_OVR_DATA_OVERWRITTEN;
|
||||
if (HAL_ADC_Init(&hadc2) != HAL_OK)
|
||||
@ -369,6 +414,54 @@ static void MX_ADC2_Init(void)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/** Configure Regular Channel
|
||||
*/
|
||||
sConfig.Rank = ADC_REGULAR_RANK_2;
|
||||
if (HAL_ADC_ConfigChannel(&hadc2, &sConfig) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/** Configure Regular Channel
|
||||
*/
|
||||
sConfig.Rank = ADC_REGULAR_RANK_3;
|
||||
if (HAL_ADC_ConfigChannel(&hadc2, &sConfig) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/** Configure Regular Channel
|
||||
*/
|
||||
sConfig.Rank = ADC_REGULAR_RANK_4;
|
||||
if (HAL_ADC_ConfigChannel(&hadc2, &sConfig) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/** Configure Regular Channel
|
||||
*/
|
||||
sConfig.Rank = ADC_REGULAR_RANK_5;
|
||||
if (HAL_ADC_ConfigChannel(&hadc2, &sConfig) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/** Configure Regular Channel
|
||||
*/
|
||||
sConfig.Rank = ADC_REGULAR_RANK_6;
|
||||
if (HAL_ADC_ConfigChannel(&hadc2, &sConfig) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/** Configure Regular Channel
|
||||
*/
|
||||
sConfig.Rank = ADC_REGULAR_RANK_7;
|
||||
if (HAL_ADC_ConfigChannel(&hadc2, &sConfig) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN ADC2_Init 2 */
|
||||
|
||||
/* USER CODE END ADC2_Init 2 */
|
||||
@ -460,41 +553,6 @@ static void MX_I2C1_Init(void)
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief IWDG Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_IWDG_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN IWDG_Init 0 */
|
||||
|
||||
/* USER CODE END IWDG_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN IWDG_Init 1 */
|
||||
|
||||
//
|
||||
// CALC:
|
||||
//
|
||||
// 1000 × 1/(32 kHz / 4)
|
||||
//
|
||||
|
||||
/* USER CODE END IWDG_Init 1 */
|
||||
hiwdg.Instance = IWDG;
|
||||
hiwdg.Init.Prescaler = IWDG_PRESCALER_4;
|
||||
hiwdg.Init.Window = 1000;
|
||||
hiwdg.Init.Reload = 1000;
|
||||
if (HAL_IWDG_Init(&hiwdg) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN IWDG_Init 2 */
|
||||
|
||||
/* USER CODE END IWDG_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief TIM2 Initialization Function
|
||||
* @param None
|
||||
|
||||
116
PDU FT24 MCU.ioc
116
PDU FT24 MCU.ioc
@ -1,24 +1,102 @@
|
||||
#MicroXplorer Configuration settings - do not modify
|
||||
ADC1.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_1
|
||||
ADC1.Channel-1\#ChannelRegularConversion=ADC_CHANNEL_1
|
||||
ADC1.Channel-2\#ChannelRegularConversion=ADC_CHANNEL_1
|
||||
ADC1.Channel-3\#ChannelRegularConversion=ADC_CHANNEL_1
|
||||
ADC1.Channel-4\#ChannelRegularConversion=ADC_CHANNEL_1
|
||||
ADC1.Channel-5\#ChannelRegularConversion=ADC_CHANNEL_1
|
||||
ADC1.Channel-6\#ChannelRegularConversion=ADC_CHANNEL_1
|
||||
ADC1.DMAContinuousRequests=ENABLE
|
||||
ADC1.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,OffsetNumber-0\#ChannelRegularConversion,Offset-0\#ChannelRegularConversion,NbrOfConversionFlag,master,DMAContinuousRequests,NbrOfConversion
|
||||
ADC1.NbrOfConversion=1
|
||||
ADC1.EOCSelection=ADC_EOC_SEQ_CONV
|
||||
ADC1.ExternalTrigConv=ADC_EXTERNALTRIGCONV_T6_TRGO
|
||||
ADC1.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,OffsetNumber-0\#ChannelRegularConversion,Offset-0\#ChannelRegularConversion,NbrOfConversionFlag,master,DMAContinuousRequests,NbrOfConversion,EOCSelection,ExternalTrigConv,Rank-1\#ChannelRegularConversion,Channel-1\#ChannelRegularConversion,SamplingTime-1\#ChannelRegularConversion,SamplingTimeOPAMP-1\#ChannelRegularConversion,OffsetNumber-1\#ChannelRegularConversion,Offset-1\#ChannelRegularConversion,Rank-2\#ChannelRegularConversion,Channel-2\#ChannelRegularConversion,SamplingTime-2\#ChannelRegularConversion,SamplingTimeOPAMP-2\#ChannelRegularConversion,OffsetNumber-2\#ChannelRegularConversion,Offset-2\#ChannelRegularConversion,Rank-3\#ChannelRegularConversion,Channel-3\#ChannelRegularConversion,SamplingTime-3\#ChannelRegularConversion,SamplingTimeOPAMP-3\#ChannelRegularConversion,OffsetNumber-3\#ChannelRegularConversion,Offset-3\#ChannelRegularConversion,Rank-4\#ChannelRegularConversion,Channel-4\#ChannelRegularConversion,SamplingTime-4\#ChannelRegularConversion,SamplingTimeOPAMP-4\#ChannelRegularConversion,OffsetNumber-4\#ChannelRegularConversion,Offset-4\#ChannelRegularConversion,Rank-5\#ChannelRegularConversion,Channel-5\#ChannelRegularConversion,SamplingTime-5\#ChannelRegularConversion,SamplingTimeOPAMP-5\#ChannelRegularConversion,OffsetNumber-5\#ChannelRegularConversion,Offset-5\#ChannelRegularConversion,Rank-6\#ChannelRegularConversion,Channel-6\#ChannelRegularConversion,SamplingTime-6\#ChannelRegularConversion,SamplingTimeOPAMP-6\#ChannelRegularConversion,OffsetNumber-6\#ChannelRegularConversion,Offset-6\#ChannelRegularConversion
|
||||
ADC1.NbrOfConversion=7
|
||||
ADC1.NbrOfConversionFlag=1
|
||||
ADC1.Offset-0\#ChannelRegularConversion=0
|
||||
ADC1.Offset-1\#ChannelRegularConversion=0
|
||||
ADC1.Offset-2\#ChannelRegularConversion=0
|
||||
ADC1.Offset-3\#ChannelRegularConversion=0
|
||||
ADC1.Offset-4\#ChannelRegularConversion=0
|
||||
ADC1.Offset-5\#ChannelRegularConversion=0
|
||||
ADC1.Offset-6\#ChannelRegularConversion=0
|
||||
ADC1.OffsetNumber-0\#ChannelRegularConversion=ADC_OFFSET_NONE
|
||||
ADC1.OffsetNumber-1\#ChannelRegularConversion=ADC_OFFSET_NONE
|
||||
ADC1.OffsetNumber-2\#ChannelRegularConversion=ADC_OFFSET_NONE
|
||||
ADC1.OffsetNumber-3\#ChannelRegularConversion=ADC_OFFSET_NONE
|
||||
ADC1.OffsetNumber-4\#ChannelRegularConversion=ADC_OFFSET_NONE
|
||||
ADC1.OffsetNumber-5\#ChannelRegularConversion=ADC_OFFSET_NONE
|
||||
ADC1.OffsetNumber-6\#ChannelRegularConversion=ADC_OFFSET_NONE
|
||||
ADC1.Rank-0\#ChannelRegularConversion=1
|
||||
ADC1.Rank-1\#ChannelRegularConversion=2
|
||||
ADC1.Rank-2\#ChannelRegularConversion=3
|
||||
ADC1.Rank-3\#ChannelRegularConversion=4
|
||||
ADC1.Rank-4\#ChannelRegularConversion=5
|
||||
ADC1.Rank-5\#ChannelRegularConversion=6
|
||||
ADC1.Rank-6\#ChannelRegularConversion=7
|
||||
ADC1.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_1CYCLE_5
|
||||
ADC1.SamplingTime-1\#ChannelRegularConversion=ADC_SAMPLETIME_1CYCLE_5
|
||||
ADC1.SamplingTime-2\#ChannelRegularConversion=ADC_SAMPLETIME_1CYCLE_5
|
||||
ADC1.SamplingTime-3\#ChannelRegularConversion=ADC_SAMPLETIME_1CYCLE_5
|
||||
ADC1.SamplingTime-4\#ChannelRegularConversion=ADC_SAMPLETIME_1CYCLE_5
|
||||
ADC1.SamplingTime-5\#ChannelRegularConversion=ADC_SAMPLETIME_1CYCLE_5
|
||||
ADC1.SamplingTime-6\#ChannelRegularConversion=ADC_SAMPLETIME_1CYCLE_5
|
||||
ADC1.SamplingTimeOPAMP-1\#ChannelRegularConversion=ADC_SAMPLETIME_61CYCLES_5
|
||||
ADC1.SamplingTimeOPAMP-2\#ChannelRegularConversion=ADC_SAMPLETIME_61CYCLES_5
|
||||
ADC1.SamplingTimeOPAMP-3\#ChannelRegularConversion=ADC_SAMPLETIME_61CYCLES_5
|
||||
ADC1.SamplingTimeOPAMP-4\#ChannelRegularConversion=ADC_SAMPLETIME_61CYCLES_5
|
||||
ADC1.SamplingTimeOPAMP-5\#ChannelRegularConversion=ADC_SAMPLETIME_61CYCLES_5
|
||||
ADC1.SamplingTimeOPAMP-6\#ChannelRegularConversion=ADC_SAMPLETIME_61CYCLES_5
|
||||
ADC1.master=1
|
||||
ADC2.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_1
|
||||
ADC2.Channel-1\#ChannelRegularConversion=ADC_CHANNEL_1
|
||||
ADC2.Channel-2\#ChannelRegularConversion=ADC_CHANNEL_1
|
||||
ADC2.Channel-3\#ChannelRegularConversion=ADC_CHANNEL_1
|
||||
ADC2.Channel-4\#ChannelRegularConversion=ADC_CHANNEL_1
|
||||
ADC2.Channel-5\#ChannelRegularConversion=ADC_CHANNEL_1
|
||||
ADC2.Channel-6\#ChannelRegularConversion=ADC_CHANNEL_1
|
||||
ADC2.ClockPrescaler=ADC_CLOCK_ASYNC_DIV1
|
||||
ADC2.DMAContinuousRequests=ENABLE
|
||||
ADC2.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,OffsetNumber-0\#ChannelRegularConversion,Offset-0\#ChannelRegularConversion,NbrOfConversionFlag,ClockPrescaler,LowPowerAutoWait,DMAContinuousRequests
|
||||
ADC2.EOCSelection=ADC_EOC_SEQ_CONV
|
||||
ADC2.EnableInjectedConversion=DISABLE
|
||||
ADC2.ExternalTrigConv=ADC_EXTERNALTRIGCONV_T6_TRGO
|
||||
ADC2.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,OffsetNumber-0\#ChannelRegularConversion,Offset-0\#ChannelRegularConversion,NbrOfConversionFlag,ClockPrescaler,LowPowerAutoWait,DMAContinuousRequests,EOCSelection,NbrOfConversion,Rank-1\#ChannelRegularConversion,Channel-1\#ChannelRegularConversion,SamplingTime-1\#ChannelRegularConversion,SamplingTimeOPAMP-1\#ChannelRegularConversion,OffsetNumber-1\#ChannelRegularConversion,Offset-1\#ChannelRegularConversion,Rank-2\#ChannelRegularConversion,Channel-2\#ChannelRegularConversion,SamplingTime-2\#ChannelRegularConversion,SamplingTimeOPAMP-2\#ChannelRegularConversion,OffsetNumber-2\#ChannelRegularConversion,Offset-2\#ChannelRegularConversion,Rank-3\#ChannelRegularConversion,Channel-3\#ChannelRegularConversion,SamplingTime-3\#ChannelRegularConversion,SamplingTimeOPAMP-3\#ChannelRegularConversion,OffsetNumber-3\#ChannelRegularConversion,Offset-3\#ChannelRegularConversion,Rank-4\#ChannelRegularConversion,Channel-4\#ChannelRegularConversion,SamplingTime-4\#ChannelRegularConversion,SamplingTimeOPAMP-4\#ChannelRegularConversion,OffsetNumber-4\#ChannelRegularConversion,Offset-4\#ChannelRegularConversion,Rank-5\#ChannelRegularConversion,Channel-5\#ChannelRegularConversion,SamplingTime-5\#ChannelRegularConversion,SamplingTimeOPAMP-5\#ChannelRegularConversion,OffsetNumber-5\#ChannelRegularConversion,Offset-5\#ChannelRegularConversion,Rank-6\#ChannelRegularConversion,Channel-6\#ChannelRegularConversion,SamplingTime-6\#ChannelRegularConversion,SamplingTimeOPAMP-6\#ChannelRegularConversion,OffsetNumber-6\#ChannelRegularConversion,Offset-6\#ChannelRegularConversion,ExternalTrigConv,EnableInjectedConversion
|
||||
ADC2.LowPowerAutoWait=DISABLE
|
||||
ADC2.NbrOfConversion=7
|
||||
ADC2.NbrOfConversionFlag=1
|
||||
ADC2.Offset-0\#ChannelRegularConversion=0
|
||||
ADC2.Offset-1\#ChannelRegularConversion=0
|
||||
ADC2.Offset-2\#ChannelRegularConversion=0
|
||||
ADC2.Offset-3\#ChannelRegularConversion=0
|
||||
ADC2.Offset-4\#ChannelRegularConversion=0
|
||||
ADC2.Offset-5\#ChannelRegularConversion=0
|
||||
ADC2.Offset-6\#ChannelRegularConversion=0
|
||||
ADC2.OffsetNumber-0\#ChannelRegularConversion=ADC_OFFSET_NONE
|
||||
ADC2.OffsetNumber-1\#ChannelRegularConversion=ADC_OFFSET_NONE
|
||||
ADC2.OffsetNumber-2\#ChannelRegularConversion=ADC_OFFSET_NONE
|
||||
ADC2.OffsetNumber-3\#ChannelRegularConversion=ADC_OFFSET_NONE
|
||||
ADC2.OffsetNumber-4\#ChannelRegularConversion=ADC_OFFSET_NONE
|
||||
ADC2.OffsetNumber-5\#ChannelRegularConversion=ADC_OFFSET_NONE
|
||||
ADC2.OffsetNumber-6\#ChannelRegularConversion=ADC_OFFSET_NONE
|
||||
ADC2.Rank-0\#ChannelRegularConversion=1
|
||||
ADC2.Rank-1\#ChannelRegularConversion=2
|
||||
ADC2.Rank-2\#ChannelRegularConversion=3
|
||||
ADC2.Rank-3\#ChannelRegularConversion=4
|
||||
ADC2.Rank-4\#ChannelRegularConversion=5
|
||||
ADC2.Rank-5\#ChannelRegularConversion=6
|
||||
ADC2.Rank-6\#ChannelRegularConversion=7
|
||||
ADC2.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_1CYCLE_5
|
||||
ADC2.SamplingTime-1\#ChannelRegularConversion=ADC_SAMPLETIME_1CYCLE_5
|
||||
ADC2.SamplingTime-2\#ChannelRegularConversion=ADC_SAMPLETIME_1CYCLE_5
|
||||
ADC2.SamplingTime-3\#ChannelRegularConversion=ADC_SAMPLETIME_1CYCLE_5
|
||||
ADC2.SamplingTime-4\#ChannelRegularConversion=ADC_SAMPLETIME_1CYCLE_5
|
||||
ADC2.SamplingTime-5\#ChannelRegularConversion=ADC_SAMPLETIME_1CYCLE_5
|
||||
ADC2.SamplingTime-6\#ChannelRegularConversion=ADC_SAMPLETIME_1CYCLE_5
|
||||
ADC2.SamplingTimeOPAMP-1\#ChannelRegularConversion=ADC_SAMPLETIME_61CYCLES_5
|
||||
ADC2.SamplingTimeOPAMP-2\#ChannelRegularConversion=ADC_SAMPLETIME_61CYCLES_5
|
||||
ADC2.SamplingTimeOPAMP-3\#ChannelRegularConversion=ADC_SAMPLETIME_61CYCLES_5
|
||||
ADC2.SamplingTimeOPAMP-4\#ChannelRegularConversion=ADC_SAMPLETIME_61CYCLES_5
|
||||
ADC2.SamplingTimeOPAMP-5\#ChannelRegularConversion=ADC_SAMPLETIME_61CYCLES_5
|
||||
ADC2.SamplingTimeOPAMP-6\#ChannelRegularConversion=ADC_SAMPLETIME_61CYCLES_5
|
||||
CAD.formats=
|
||||
CAD.pinconfig=
|
||||
CAD.provider=
|
||||
@ -56,27 +134,22 @@ File.Version=6
|
||||
GPIO.groupedBy=Group By Peripherals
|
||||
I2C1.IPParameters=Timing
|
||||
I2C1.Timing=0x00303D5B
|
||||
IWDG.IPParameters=Prescaler,Window,Reload
|
||||
IWDG.Prescaler=IWDG_PRESCALER_4
|
||||
IWDG.Reload=1000
|
||||
IWDG.Window=1000
|
||||
KeepUserPlacement=false
|
||||
Mcu.CPN=STM32F302RBT6
|
||||
Mcu.Family=STM32F3
|
||||
Mcu.IP0=ADC1
|
||||
Mcu.IP1=ADC2
|
||||
Mcu.IP10=TIM3
|
||||
Mcu.IP11=TIM6
|
||||
Mcu.IP12=USART1
|
||||
Mcu.IP10=TIM6
|
||||
Mcu.IP11=USART1
|
||||
Mcu.IP2=CAN
|
||||
Mcu.IP3=DMA
|
||||
Mcu.IP4=I2C1
|
||||
Mcu.IP5=IWDG
|
||||
Mcu.IP6=NVIC
|
||||
Mcu.IP7=RCC
|
||||
Mcu.IP8=SYS
|
||||
Mcu.IP9=TIM2
|
||||
Mcu.IPNb=13
|
||||
Mcu.IP5=NVIC
|
||||
Mcu.IP6=RCC
|
||||
Mcu.IP7=SYS
|
||||
Mcu.IP8=TIM2
|
||||
Mcu.IP9=TIM3
|
||||
Mcu.IPNb=12
|
||||
Mcu.Name=STM32F302R(B-C)Tx
|
||||
Mcu.Package=LQFP64
|
||||
Mcu.Pin0=PF0-OSC_IN
|
||||
@ -110,16 +183,15 @@ Mcu.Pin33=PB3
|
||||
Mcu.Pin34=PB4
|
||||
Mcu.Pin35=PB7
|
||||
Mcu.Pin36=PB9
|
||||
Mcu.Pin37=VP_IWDG_VS_IWDG
|
||||
Mcu.Pin38=VP_SYS_VS_Systick
|
||||
Mcu.Pin39=VP_TIM6_VS_ClockSourceINT
|
||||
Mcu.Pin37=VP_SYS_VS_Systick
|
||||
Mcu.Pin38=VP_TIM6_VS_ClockSourceINT
|
||||
Mcu.Pin4=PC2
|
||||
Mcu.Pin5=PC3
|
||||
Mcu.Pin6=PA0
|
||||
Mcu.Pin7=PA1
|
||||
Mcu.Pin8=PA2
|
||||
Mcu.Pin9=PA3
|
||||
Mcu.PinsNb=40
|
||||
Mcu.PinsNb=39
|
||||
Mcu.ThirdPartyNb=0
|
||||
Mcu.UserConstants=
|
||||
Mcu.UserName=STM32F302RBTx
|
||||
@ -312,7 +384,7 @@ ProjectManager.ToolChainLocation=
|
||||
ProjectManager.UAScriptAfterPath=
|
||||
ProjectManager.UAScriptBeforePath=
|
||||
ProjectManager.UnderRoot=false
|
||||
ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_DMA_Init-DMA-false-HAL-true,4-MX_ADC1_Init-ADC1-false-HAL-true,5-MX_ADC2_Init-ADC2-false-HAL-true,6-MX_CAN_Init-CAN-false-HAL-true,7-MX_TIM2_Init-TIM2-false-HAL-true,8-MX_TIM3_Init-TIM3-false-HAL-true,9-MX_I2C1_Init-I2C1-false-HAL-true,10-MX_USART1_UART_Init-USART1-false-HAL-true,11-MX_TIM6_Init-TIM6-false-HAL-true
|
||||
ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_DMA_Init-DMA-false-HAL-true,4-MX_ADC1_Init-ADC1-false-HAL-true,5-MX_ADC2_Init-ADC2-false-HAL-true,6-MX_CAN_Init-CAN-false-HAL-true,7-MX_TIM2_Init-TIM2-false-HAL-true,8-MX_TIM3_Init-TIM3-false-HAL-true,9-MX_I2C1_Init-I2C1-false-HAL-true,10-MX_USART1_UART_Init-USART1-false-HAL-true,11-MX_TIM6_Init-TIM6-false-HAL-true,12-MX_IWDG_Init-IWDG-false-HAL-true
|
||||
RCC.ADC12outputFreq_Value=64000000
|
||||
RCC.AHBFreq_Value=16000000
|
||||
RCC.APB1Freq_Value=16000000
|
||||
@ -384,8 +456,6 @@ TIM6.Prescaler=400
|
||||
TIM6.TIM_MasterOutputTrigger=TIM_TRGO_UPDATE
|
||||
USART1.IPParameters=VirtualMode-Multiprocessor_communication
|
||||
USART1.VirtualMode-Multiprocessor_communication=VM_ASYNC
|
||||
VP_IWDG_VS_IWDG.Mode=IWDG_Activate
|
||||
VP_IWDG_VS_IWDG.Signal=IWDG_VS_IWDG
|
||||
VP_SYS_VS_Systick.Mode=SysTick
|
||||
VP_SYS_VS_Systick.Signal=SYS_VS_Systick
|
||||
VP_TIM6_VS_ClockSourceINT.Mode=Enable_Timer
|
||||
|
||||
@ -59,7 +59,6 @@ Drivers/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_flash_ex.c \
|
||||
Drivers/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_gpio.c \
|
||||
Drivers/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_i2c.c \
|
||||
Drivers/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_i2c_ex.c \
|
||||
Drivers/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_iwdg.c \
|
||||
Drivers/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_pwr.c \
|
||||
Drivers/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_pwr_ex.c \
|
||||
Drivers/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_rcc.c \
|
||||
@ -86,7 +85,7 @@ PREFIX = arm-none-eabi-
|
||||
POSTFIX = "
|
||||
# The gcc compiler bin path can be either defined in make command via GCC_PATH variable (> make GCC_PATH=xxx)
|
||||
# either it can be added to the PATH environment variable.
|
||||
#GCC_PATH="c:/Users/nived/AppData/Roaming/Code/User/globalStorage/bmd.stm32-for-vscode/@xpack-dev-tools/arm-none-eabi-gcc/12.3.1-1.2.1/.content/bin
|
||||
GCC_PATH="c:/Users/GETAC/AppData/Roaming/Code/User/globalStorage/bmd.stm32-for-vscode/@xpack-dev-tools/arm-none-eabi-gcc/13.2.1-1.1.1/.content/bin
|
||||
ifdef GCC_PATH
|
||||
CXX = $(GCC_PATH)/$(PREFIX)g++$(POSTFIX)
|
||||
CC = $(GCC_PATH)/$(PREFIX)gcc$(POSTFIX)
|
||||
@ -120,7 +119,7 @@ MCU = $(CPU) -mthumb $(FPU) $(FLOAT-ABI)
|
||||
|
||||
# macros for gcc
|
||||
# AS defines
|
||||
AS_DEFS =
|
||||
AS_DEFS =
|
||||
|
||||
# C defines
|
||||
C_DEFS = \
|
||||
@ -160,9 +159,9 @@ CXXFLAGS += -g -gdwarf -ggdb
|
||||
endif
|
||||
|
||||
# Add additional flags
|
||||
CFLAGS += -Wall -fdata-sections -ffunction-sections
|
||||
ASFLAGS += -Wall -fdata-sections -ffunction-sections
|
||||
CXXFLAGS +=
|
||||
CFLAGS += -Wall -fdata-sections -ffunction-sections
|
||||
ASFLAGS += -Wall -fdata-sections -ffunction-sections
|
||||
CXXFLAGS +=
|
||||
|
||||
# Generate dependency information
|
||||
CFLAGS += -MMD -MP -MF"$(@:%.o=%.d)"
|
||||
@ -175,12 +174,12 @@ CXXFLAGS += -MMD -MP -MF"$(@:%.o=%.d)"
|
||||
LDSCRIPT = STM32F302RBTx_FLASH.ld
|
||||
|
||||
# libraries
|
||||
LIBS = -lc -lm -lnosys
|
||||
LIBS = -lc -lm -lnosys
|
||||
LIBDIR = \
|
||||
|
||||
|
||||
# Additional LD Flags from config file
|
||||
ADDITIONALLDFLAGS = -specs=nano.specs
|
||||
ADDITIONALLDFLAGS = -specs=nano.specs
|
||||
|
||||
LDFLAGS = $(MCU) $(ADDITIONALLDFLAGS) -T$(LDSCRIPT) $(LIBDIR) $(LIBS) -Wl,-Map=$(BUILD_DIR)/$(TARGET).map,--cref -Wl,--gc-sections
|
||||
|
||||
@ -207,13 +206,13 @@ OBJECTS += $(addprefix $(BUILD_DIR)/,$(notdir $(UPPER_CASE_ASM_SOURCES:.S=.o)))
|
||||
OBJECTS += $(addprefix $(BUILD_DIR)/,$(notdir $(LOWER_CASE_ASM_SOURCES:.s=.o)))
|
||||
vpath %.s $(sort $(dir $(ASM_SOURCES)))
|
||||
|
||||
$(BUILD_DIR)/%.o: %.cpp STM32Make.make | $(BUILD_DIR)
|
||||
$(BUILD_DIR)/%.o: %.cpp STM32Make.make | $(BUILD_DIR)
|
||||
$(CXX) -c $(CXXFLAGS) -Wa,-a,-ad,-alms=$(BUILD_DIR)/$(notdir $(<:.cpp=.lst)) $< -o $@
|
||||
|
||||
$(BUILD_DIR)/%.o: %.cxx STM32Make.make | $(BUILD_DIR)
|
||||
$(BUILD_DIR)/%.o: %.cxx STM32Make.make | $(BUILD_DIR)
|
||||
$(CXX) -c $(CXXFLAGS) -Wa,-a,-ad,-alms=$(BUILD_DIR)/$(notdir $(<:.cxx=.lst)) $< -o $@
|
||||
|
||||
$(BUILD_DIR)/%.o: %.c STM32Make.make | $(BUILD_DIR)
|
||||
$(BUILD_DIR)/%.o: %.c STM32Make.make | $(BUILD_DIR)
|
||||
$(CC) -c $(CFLAGS) -Wa,-a,-ad,-alms=$(BUILD_DIR)/$(notdir $(<:.c=.lst)) $< -o $@
|
||||
|
||||
$(BUILD_DIR)/%.o: %.s STM32Make.make | $(BUILD_DIR)
|
||||
@ -239,29 +238,29 @@ $(BUILD_DIR):
|
||||
# flash
|
||||
#######################################
|
||||
flash: $(BUILD_DIR)/$(TARGET).elf
|
||||
openocd -f ./openocd.cfg -c "program $(BUILD_DIR)/$(TARGET).elf verify reset exit"
|
||||
"C:/USERS/GETAC/APPDATA/ROAMING/CODE/USER/GLOBALSTORAGE/BMD.STM32-FOR-VSCODE/@XPACK-DEV-TOOLS/OPENOCD/0.12.0-3.1/.CONTENT/BIN/OPENOCD.EXE" -f ./openocd.cfg -c "program $(BUILD_DIR)/$(TARGET).elf verify reset exit"
|
||||
|
||||
#######################################
|
||||
# erase
|
||||
#######################################
|
||||
erase: $(BUILD_DIR)/$(TARGET).elf
|
||||
openocd -f ./openocd.cfg -c "init; reset halt; stm32f3x mass_erase 0; exit"
|
||||
"C:/USERS/GETAC/APPDATA/ROAMING/CODE/USER/GLOBALSTORAGE/BMD.STM32-FOR-VSCODE/@XPACK-DEV-TOOLS/OPENOCD/0.12.0-3.1/.CONTENT/BIN/OPENOCD.EXE" -f ./openocd.cfg -c "init; reset halt; stm32f3x mass_erase 0; exit"
|
||||
|
||||
#######################################
|
||||
# clean up
|
||||
#######################################
|
||||
clean:
|
||||
rm -r $(BUILD_DIR)
|
||||
cmd /c rd /s /q $(BUILD_DIR)
|
||||
|
||||
#######################################
|
||||
# custom makefile rules
|
||||
#######################################
|
||||
|
||||
|
||||
|
||||
|
||||
#######################################
|
||||
# dependencies
|
||||
#######################################
|
||||
-include $(wildcard $(BUILD_DIR)/*.d)
|
||||
|
||||
# *** EOF ***
|
||||
# *** EOF ***
|
||||
Reference in New Issue
Block a user