/** ****************************************************************************** * @file stm32l4xx_hal_rtc_ex.h * @author MCD Application Team * @brief Header file of RTC HAL Extended module. ****************************************************************************** * @attention * * Copyright (c) 2017 STMicroelectronics. * All rights reserved. * * This software is licensed under terms that can be found in the LICENSE file * in the root directory of this software component. * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef STM32L4xx_HAL_RTC_EX_H #define STM32L4xx_HAL_RTC_EX_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32l4xx_hal_def.h" /** @addtogroup STM32L4xx_HAL_Driver * @{ */ /** @defgroup RTCEx RTCEx * @{ */ /* Exported types ------------------------------------------------------------*/ /** @defgroup RTCEx_Exported_Types RTCEx Exported Types * @{ */ /** @defgroup RTCEx_Tamper_structure_definition RTCEx Tamper structure definition * @{ */ typedef struct { uint32_t Tamper; /*!< Specifies the Tamper Pin. This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions */ uint32_t Interrupt; /*!< Specifies the Tamper Interrupt. This parameter can be a value of @ref RTCEx_Tamper_Interrupt_Definitions */ uint32_t Trigger; /*!< Specifies the Tamper Trigger. This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */ uint32_t NoErase; /*!< Specifies the Tamper no erase mode. This parameter can be a value of @ref RTCEx_Tamper_EraseBackUp_Definitions */ uint32_t MaskFlag; /*!< Specifies the Tamper Flag masking. This parameter can be a value of @ref RTCEx_Tamper_MaskFlag_Definitions */ uint32_t Filter; /*!< Specifies the TAMP Filter Tamper. This parameter can be a value of @ref RTCEx_Tamper_Filter_Definitions */ uint32_t SamplingFrequency; /*!< Specifies the sampling frequency. This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies_Definitions */ uint32_t PrechargeDuration; /*!< Specifies the Precharge Duration . This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration_Definitions */ uint32_t TamperPullUp; /*!< Specifies the Tamper PullUp . This parameter can be a value of @ref RTCEx_Tamper_Pull_UP_Definitions */ uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection. This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */ } RTC_TamperTypeDef; /** * @} */ /** * @} */ /* Exported constants --------------------------------------------------------*/ /** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants * @{ */ /* ========================================================================== */ /* ##### RTC TimeStamp exported constants ##### */ /* ========================================================================== */ /** @defgroup RTCEx_Time_Stamp_Edges_definitions RTCEx Time Stamp Edges Definitions * * @{ */ #define RTC_TIMESTAMPEDGE_RISING 0x00000000u #define RTC_TIMESTAMPEDGE_FALLING RTC_CR_TSEDGE /** * @} */ /** @defgroup RTCEx_TimeStamp_Pin_Selection RTCEx TimeStamp Pin Selection * @{ */ #define RTC_TIMESTAMPPIN_DEFAULT 0x00000000u /** * @} */ /* ========================================================================== */ /* ##### RTC Wake-up exported constants ##### */ /* ========================================================================== */ /** @defgroup RTCEx_Wakeup_Timer_Definitions RTCEx Wakeup Timer Definitions * @{ */ #define RTC_WAKEUPCLOCK_RTCCLK_DIV16 0x00000000u #define RTC_WAKEUPCLOCK_RTCCLK_DIV8 RTC_CR_WUCKSEL_0 #define RTC_WAKEUPCLOCK_RTCCLK_DIV4 RTC_CR_WUCKSEL_1 #define RTC_WAKEUPCLOCK_RTCCLK_DIV2 (RTC_CR_WUCKSEL_0 | RTC_CR_WUCKSEL_1) #define RTC_WAKEUPCLOCK_CK_SPRE_16BITS RTC_CR_WUCKSEL_2 #define RTC_WAKEUPCLOCK_CK_SPRE_17BITS (RTC_CR_WUCKSEL_1 | RTC_CR_WUCKSEL_2) /** * @} */ /* ========================================================================== */ /* ##### Extended RTC Peripheral Control exported constants ##### */ /* ========================================================================== */ /** @defgroup RTCEx_Smooth_calib_period_Definitions RTCEx Smooth Calib Period Definitions * @{ */ #define RTC_SMOOTHCALIB_PERIOD_32SEC 0x00000000u /*!< If RTCCLK = 32768 Hz, Smooth calibration period is 32s, else 2exp20 RTCCLK pulses */ #define RTC_SMOOTHCALIB_PERIOD_16SEC RTC_CALR_CALW16 /*!< If RTCCLK = 32768 Hz, Smooth calibration period is 16s, else 2exp19 RTCCLK pulses */ #define RTC_SMOOTHCALIB_PERIOD_8SEC RTC_CALR_CALW8 /*!< If RTCCLK = 32768 Hz, Smooth calibration period is 8s, else 2exp18 RTCCLK pulses */ /** * @} */ /** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTCEx Smooth calib Plus pulses Definitions * @{ */ #define RTC_SMOOTHCALIB_PLUSPULSES_SET RTC_CALR_CALP /*!< The number of RTCCLK pulses added during a X -second window = Y - CALM[8:0] with Y = 512, 256, 128 when X = 32, 16, 8 */ #define RTC_SMOOTHCALIB_PLUSPULSES_RESET 0x00000000u /*!< The number of RTCCLK pulses subbstited during a 32-second window = CALM[8:0] */ /** * @} */ #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) /** @defgroup RTCEx_Smooth_Calib_Low_Power_Definitions RTCEx Smooth Calib Low Power Definitions * @{ */ #define RTC_LPCAL_SET RTC_CALR_LPCAL /*!< Calibration window is 220 ck_apre, which is the required configuration for ultra-low consumption mode. */ #define RTC_LPCAL_RESET 0x00000000u /*!< Calibration window is 220 RTCCLK, which is a high-consumption mode. This mode should be set only when less than 32s calibration window is required. */ /** * @} */ #endif /* #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) */ /** @defgroup RTCEx_Calib_Output_selection_Definitions RTCEx Calib Output Selection Definitions * @{ */ #define RTC_CALIBOUTPUT_512HZ 0x00000000u #define RTC_CALIBOUTPUT_1HZ RTC_CR_COSEL /** * @} */ /** @defgroup RTCEx_Add_1_Second_Parameter_Definitions RTC Add 1 Second Parameter Definitions * @{ */ #define RTC_SHIFTADD1S_RESET 0x00000000u #define RTC_SHIFTADD1S_SET RTC_SHIFTR_ADD1S /** * @} */ /* ========================================================================== */ /* ##### RTC Tamper exported constants ##### */ /* ========================================================================== */ /** @defgroup RTCEx_Tamper_Pins_Definitions RTCEx Tamper Pins Definitions * @{ */ #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) #if defined(RTC_TAMPER1_SUPPORT) #define RTC_TAMPER_1 TAMP_CR1_TAMP1E #endif /* RTC_TAMPER1_SUPPORT */ #define RTC_TAMPER_2 TAMP_CR1_TAMP2E #if defined(RTC_TAMPER3_SUPPORT) #define RTC_TAMPER_3 TAMP_CR1_TAMP3E #endif /* RTC_TAMPER3_SUPPORT */ #if defined(RTC_TAMPER3_SUPPORT) #define RTC_TAMPER_ALL (TAMP_CR1_TAMP1E | TAMP_CR1_TAMP2E | TAMP_CR1_TAMP3E) #else #define RTC_TAMPER_ALL (TAMP_CR1_TAMP1E | TAMP_CR1_TAMP2E) #endif #else /* #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) */ #if defined(RTC_TAMPER1_SUPPORT) #define RTC_TAMPER_1 RTC_TAMPCR_TAMP1E #endif /* RTC_TAMPER1_SUPPORT */ #define RTC_TAMPER_2 RTC_TAMPCR_TAMP2E #if defined(RTC_TAMPER3_SUPPORT) #define RTC_TAMPER_3 RTC_TAMPCR_TAMP3E #endif /* RTC_TAMPER3_SUPPORT */ #endif /* #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) */ /** * @} */ /** @defgroup RTCEx_Tamper_Trigger_Definitions RTCEx Tamper Triggers Definitions * @{ */ #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) #define RTC_TAMPERTRIGGER_RISINGEDGE 0x00u /*!< Warning : Filter must be RTC_TAMPERFILTER_DISABLE */ #define RTC_TAMPERTRIGGER_FALLINGEDGE 0x01u /*!< Warning : Filter must be RTC_TAMPERFILTER_DISABLE */ #define RTC_TAMPERTRIGGER_LOWLEVEL 0x02u /*!< Warning : Filter must not be RTC_TAMPERFILTER_DISABLE */ #define RTC_TAMPERTRIGGER_HIGHLEVEL 0x03u /*!< Warning : Filter must not be RTC_TAMPERFILTER_DISABLE */ #else #define RTC_TAMPERTRIGGER_RISINGEDGE ((uint32_t)0x00000000) #define RTC_TAMPERTRIGGER_FALLINGEDGE ((uint32_t)0x00000002) #define RTC_TAMPERTRIGGER_LOWLEVEL RTC_TAMPERTRIGGER_RISINGEDGE #define RTC_TAMPERTRIGGER_HIGHLEVEL RTC_TAMPERTRIGGER_FALLINGEDGE #endif /** * @} */ /** @defgroup RTCEx_Tamper_MaskFlag_Definitions RTCEx Tamper Mask Flag Definitions * @{ */ #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) #define RTC_TAMPERMASK_FLAG_DISABLE 0x00u #define RTC_TAMPERMASK_FLAG_ENABLE 0x01u #else #define RTC_TAMPERMASK_FLAG_DISABLE 0x00000000u #define RTC_TAMPERMASK_FLAG_ENABLE 0x00040000u #endif /** * @} */ /** @defgroup RTCEx_Tamper_EraseBackUp_Definitions RTCEx Tamper EraseBackUp Definitions * @{ */ #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) #define RTC_TAMPER_ERASE_BACKUP_ENABLE 0x00u #define RTC_TAMPER_ERASE_BACKUP_DISABLE 0x01u #else #define RTC_TAMPER_ERASE_BACKUP_ENABLE 0x00000000u #define RTC_TAMPER_ERASE_BACKUP_DISABLE 0x00020000u #endif /** * @} */ /** @defgroup RTCEx_Tamper_Filter_Definitions RTCEx Tamper Filter Definitions * @{ */ #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) #define RTC_TAMPERFILTER_DISABLE 0x00000000U /*!< Tamper filter is disabled */ #define RTC_TAMPERFILTER_2SAMPLE TAMP_FLTCR_TAMPFLT_0 /*!< Tamper is activated after 2 consecutive samples at the active level */ #define RTC_TAMPERFILTER_4SAMPLE TAMP_FLTCR_TAMPFLT_1 /*!< Tamper is activated after 4 consecutive samples at the active level */ #define RTC_TAMPERFILTER_8SAMPLE TAMP_FLTCR_TAMPFLT /*!< Tamper is activated after 8 consecutive samples at the active level */ #else /* #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) */ #define RTC_TAMPERFILTER_DISABLE 0x00000000u /*!< Tamper filter is disabled */ #define RTC_TAMPERFILTER_2SAMPLE RTC_TAMPCR_TAMPFLT_0 /*!< Tamper is activated after 2 consecutive samples at the active level */ #define RTC_TAMPERFILTER_4SAMPLE RTC_TAMPCR_TAMPFLT_1 /*!< Tamper is activated after 4 consecutive samples at the active level */ #define RTC_TAMPERFILTER_8SAMPLE RTC_TAMPCR_TAMPFLT /*!< Tamper is activated after 8 consecutive samples at the active level. */ #endif /*#if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) */ /** * @} */ /** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions RTCEx Tamper Sampling Frequencies Definitions * @{ */ #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 0x00000000U /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 32768 */ #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 TAMP_FLTCR_TAMPFREQ_0 /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 16384 */ #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 TAMP_FLTCR_TAMPFREQ_1 /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 8192 */ #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 (TAMP_FLTCR_TAMPFREQ_0 | TAMP_FLTCR_TAMPFREQ_1) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 4096 */ #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 TAMP_FLTCR_TAMPFREQ_2 /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 2048 */ #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 (TAMP_FLTCR_TAMPFREQ_0 | TAMP_FLTCR_TAMPFREQ_2) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 1024 */ #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 (TAMP_FLTCR_TAMPFREQ_1 | TAMP_FLTCR_TAMPFREQ_2) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 512 */ #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 TAMP_FLTCR_TAMPFREQ /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 256 */ #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_MASK TAMP_FLTCR_TAMPFREQ /*!< Masking all bits except those of field TAMPFREQ[2:0]*/ #else /* #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) */ #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 0x00000000u /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 32768 */ #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 RTC_TAMPCR_TAMPFREQ_0 /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 16384 */ #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 RTC_TAMPCR_TAMPFREQ_1 /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 8192 */ #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 (RTC_TAMPCR_TAMPFREQ_0 | RTC_TAMPCR_TAMPFREQ_1) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 4096 */ #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 RTC_TAMPCR_TAMPFREQ_2 /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 2048 */ #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 (RTC_TAMPCR_TAMPFREQ_0 | RTC_TAMPCR_TAMPFREQ_2) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 1024 */ #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 (RTC_TAMPCR_TAMPFREQ_1 | RTC_TAMPCR_TAMPFREQ_2) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 512 */ #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 RTC_TAMPCR_TAMPFREQ /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 256 */ #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_MASK RTC_TAMPCR_TAMPFREQ /*!< Masking all bits except those of field TAMPFREQ[2:0]*/ #endif /* #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) */ /** * @} */ /** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions RTCEx Tamper Pin Precharge Duration Definitions * @{ */ #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) #define RTC_TAMPERPRECHARGEDURATION_1RTCCLK 0x00000000U /*!< Tamper pins are pre-charged before sampling during 1 RTCCLK cycle */ #define RTC_TAMPERPRECHARGEDURATION_2RTCCLK TAMP_FLTCR_TAMPPRCH_0 /*!< Tamper pins are pre-charged before sampling during 2 RTCCLK cycles */ #define RTC_TAMPERPRECHARGEDURATION_4RTCCLK TAMP_FLTCR_TAMPPRCH_1 /*!< Tamper pins are pre-charged before sampling during 4 RTCCLK cycles */ #define RTC_TAMPERPRECHARGEDURATION_8RTCCLK TAMP_FLTCR_TAMPPRCH /*!< Tamper pins are pre-charged before sampling during 8 RTCCLK cycles */ #else /* #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) */ #define RTC_TAMPERPRECHARGEDURATION_1RTCCLK 0x00000000u /*!< Tamper pins are pre-charged before sampling during 1 RTCCLK cycle */ #define RTC_TAMPERPRECHARGEDURATION_2RTCCLK RTC_TAMPCR_TAMPPRCH_0 /*!< Tamper pins are pre-charged before sampling during 2 RTCCLK cycles */ #define RTC_TAMPERPRECHARGEDURATION_4RTCCLK RTC_TAMPCR_TAMPPRCH_1 /*!< Tamper pins are pre-charged before sampling during 4 RTCCLK cycles */ #define RTC_TAMPERPRECHARGEDURATION_8RTCCLK RTC_TAMPCR_TAMPPRCH /*!< Tamper pins are pre-charged before sampling during 8 RTCCLK cycles */ #define RTC_TAMPERPRECHARGEDURATION_MASK RTC_TAMPCR_TAMPPRCH /*!< Masking all bits except those of field TAMPPRCH[1:0] */ #endif /* #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) */ /** * @} */ /** @defgroup RTCEx_Tamper_Pull_UP_Definitions RTCEx Tamper Pull Up Definitions * @{ */ #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) #define RTC_TAMPER_PULLUP_ENABLE 0x00000000u /*!< Tamper pins are pre-charged before sampling */ #define RTC_TAMPER_PULLUP_DISABLE TAMP_FLTCR_TAMPPUDIS /*!< Tamper pins pre-charge is disabled */ #else #define RTC_TAMPER_PULLUP_ENABLE 0x00000000u /*!< TimeStamp on Tamper Detection event saved */ #define RTC_TAMPER_PULLUP_DISABLE RTC_TAMPCR_TAMPPUDIS /*!< TimeStamp on Tamper Detection event is not saved */ #endif /** * @} */ /** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions RTCEx Tamper TimeStamp On Tamper Detection Definitions * @{ */ #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) #define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE 0x00000000u /*!< TimeStamp on Tamper Detection event is not saved */ #define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE RTC_CR_TAMPTS /*!< TimeStamp on Tamper Detection event saved */ #else #define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE 0x00000000u /*!< TimeStamp on Tamper Detection event is not saved */ #define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE RTC_TAMPCR_TAMPTS /*!< TimeStamp on Tamper Detection event saved */ #endif /** * @} */ /** @defgroup RTCEx_Tamper_Interrupt_Definitions RTC Tamper Interrupts Definitions * @{ */ #if defined(STM32L412xx) || defined(STM32L422xx) #define RTC_IT_TAMP1 TAMP_IER_TAMP1IE /*!< Tamper 1 Interrupt */ #define RTC_IT_TAMP2 TAMP_IER_TAMP2IE /*!< Tamper 2 Interrupt */ #define RTC_IT_TAMP (TAMP_IER_TAMP1IE | TAMP_IER_TAMP2IE) /*!< Enable all Tamper Interrupt */ #elif defined (STM32L4P5xx) || defined (STM32L4Q5xx) #define RTC_IT_TAMP1 TAMP_IER_TAMP1IE /*!< Tamper 1 Interrupt */ #define RTC_IT_TAMP2 TAMP_IER_TAMP2IE /*!< Tamper 2 Interrupt */ #define RTC_IT_TAMP3 TAMP_IER_TAMP3IE /*!< Tamper 3 Interrupt */ #define RTC_IT_TAMP (TAMP_IER_TAMP1IE | TAMP_IER_TAMP2IE | TAMP_IER_TAMP3IE) /*!< Enable all Tamper Interrupt */ #else #define RTC_IT_TAMP RTC_TAMPCR_TAMPIE /*!< Enable all Tamper Interrupt */ #define RTC_IT_TAMP1 RTC_TAMPCR_TAMP1IE /*!< Enable Tamper 1 Interrupt */ #define RTC_IT_TAMP2 RTC_TAMPCR_TAMP2IE /*!< Enable Tamper 2 Interrupt */ #define RTC_IT_TAMP3 RTC_TAMPCR_TAMP3IE /*!< Enable Tamper 3 Interrupt */ #endif #define RTC_IT_TAMPALL RTC_IT_TAMP /** * @} */ /** @defgroup RTCEx_Flags RTCEx Flags * @{ */ #if defined(STM32L412xx) || defined(STM32L422xx) #define RTC_FLAG_TAMP1F TAMP_SR_TAMP1F #define RTC_FLAG_TAMP2F TAMP_SR_TAMP2F #define RTC_FLAG_TAMPALL (RTC_FLAG_TAMP1F | RTC_FLAG_TAMP2F) #elif defined (STM32L4P5xx) || defined (STM32L4Q5xx) #define RTC_FLAG_TAMP1F TAMP_SR_TAMP1F #define RTC_FLAG_TAMP2F TAMP_SR_TAMP2F #define RTC_FLAG_TAMP3F TAMP_SR_TAMP3F #define RTC_FLAG_TAMPALL (RTC_FLAG_TAMP1F | RTC_FLAG_TAMP2F | RTC_FLAG_TAMP3F) #else #define RTC_FLAG_TAMP1F RTC_ISR_TAMP1F #define RTC_FLAG_TAMP2F RTC_ISR_TAMP2F #define RTC_FLAG_TAMP3F RTC_ISR_TAMP3F #endif /** * @} */ /* ========================================================================== */ /* ##### Extended RTC Backup registers exported constants ##### */ /* ========================================================================== */ /** @defgroup RTCEx_Backup_Data_Registers_Number_Definitions RTC Backup Data Registers Number Definitions * @{ */ #if defined(RTC_BKP_NUMBER) #define BKP_REG_NUMBER RTC_BKP_NUMBER #endif /* RTC_BKP_NUMBER */ #if defined(TAMP_BKP_NUMBER) #define BKP_REG_NUMBER TAMP_BKP_NUMBER #endif /* TAMP_BKP_NUMBER */ /** * @} */ /** @defgroup RTCEx_Backup_Data_Registers_Definitions RTCEx Backup Data Registers Definitions * @{ */ #define RTC_BKP_DR0 0x00u #define RTC_BKP_DR1 0x01u #define RTC_BKP_DR2 0x02u #define RTC_BKP_DR3 0x03u #define RTC_BKP_DR4 0x04u #define RTC_BKP_DR5 0x05u #define RTC_BKP_DR6 0x06u #define RTC_BKP_DR7 0x07u #define RTC_BKP_DR8 0x08u #define RTC_BKP_DR9 0x09u #define RTC_BKP_DR10 0x0Au #define RTC_BKP_DR11 0x0Bu #define RTC_BKP_DR12 0x0Cu #define RTC_BKP_DR13 0x0Du #define RTC_BKP_DR14 0x0Eu #define RTC_BKP_DR15 0x0Fu #define RTC_BKP_DR16 0x10u #define RTC_BKP_DR17 0x11u #define RTC_BKP_DR18 0x12u #define RTC_BKP_DR19 0x13u #define RTC_BKP_DR20 0x14u #define RTC_BKP_DR21 0x15u #define RTC_BKP_DR22 0x16u #define RTC_BKP_DR23 0x17u #define RTC_BKP_DR24 0x18u #define RTC_BKP_DR25 0x19u #define RTC_BKP_DR26 0x1Au #define RTC_BKP_DR27 0x1Bu #define RTC_BKP_DR28 0x1Cu #define RTC_BKP_DR29 0x1Du #define RTC_BKP_DR30 0x1Eu #define RTC_BKP_DR31 0x1Fu /** * @} */ /** @defgroup RTCEx_Tamper_Interrupt_Definitions RTC Tamper Interrupts Definitions * @{ */ #if defined(STM32L412xx) || defined(STM32L422xx) #define RTC_TAMPER1_INTERRUPT TAMP_IER_TAMP1IE #define RTC_TAMPER2_INTERRUPT TAMP_IER_TAMP2IE #define RTC_ALL_TAMPER_INTERRUPT (TAMP_IER_TAMP1IE | TAMP_IER_TAMP2IE) #elif defined (STM32L4P5xx) || defined (STM32L4Q5xx) #define RTC_TAMPER1_INTERRUPT TAMP_IER_TAMP1IE #define RTC_TAMPER2_INTERRUPT TAMP_IER_TAMP2IE #define RTC_TAMPER3_INTERRUPT TAMP_IER_TAMP3IE #define RTC_ALL_TAMPER_INTERRUPT (TAMP_IER_TAMP1IE | TAMP_IER_TAMP2IE | TAMP_IER_TAMP3IE) #else /* #if defined(STM32L412xx) || defined(STM32L422xx) */ #if defined(RTC_TAMPER1_SUPPORT) #define RTC_TAMPER1_INTERRUPT RTC_TAMPCR_TAMP1IE #endif /* RTC_TAMPER1_SUPPORT */ #define RTC_TAMPER2_INTERRUPT RTC_TAMPCR_TAMP2IE #if defined(RTC_TAMPER3_SUPPORT) #define RTC_TAMPER3_INTERRUPT RTC_TAMPCR_TAMP3IE #endif /* RTC_TAMPER3_SUPPORT */ #define RTC_ALL_TAMPER_INTERRUPT RTC_TAMPCR_TAMPIE #endif /* #if defined(STM32L412xx) || defined(STM32L422xx) */ #if defined (STM32L4P5xx) || defined (STM32L4Q5xx) /** @defgroup RTCEx_Binary_Mode RTC Binary Mode (32-bit free-running counter configuration). * Warning : It Should not be confused with the Binary format @ref RTC_Input_parameter_format_definitions. * @{ */ #define RTC_BINARY_NONE 0x00000000u /*!< Free running BCD calendar mode (Binary mode disabled). */ #define RTC_BINARY_ONLY RTC_ICSR_BIN_0 /*!< Free running Binary mode (BCD mode disabled) */ #define RTC_BINARY_MIX RTC_ICSR_BIN_1 /*!< Free running BCD calendar and Binary modes */ /** * @} */ /** @defgroup RTCEx_Binary_mix_BCDU If Binary mode is RTC_BINARY_MIX, the BCD calendar second is incremented using the SSR Least Significant Bits. * @{ */ #define RTC_BINARY_MIX_BCDU_0 0x00000000u /*!< The 1s BCD calendar increment is generated each time SS[7:0] = 0 */ #define RTC_BINARY_MIX_BCDU_1 (0x1UL << RTC_ICSR_BCDU_Pos) /*!< The 1s BCD calendar increment is generated each time SS[8:0] = 0 */ #define RTC_BINARY_MIX_BCDU_2 (0x2UL << RTC_ICSR_BCDU_Pos) /*!< The 1s BCD calendar increment is generated each time SS[9:0] = 0 */ #define RTC_BINARY_MIX_BCDU_3 (0x3UL << RTC_ICSR_BCDU_Pos) /*!< The 1s BCD calendar increment is generated each time SS[10:0] = 0 */ #define RTC_BINARY_MIX_BCDU_4 (0x4UL << RTC_ICSR_BCDU_Pos) /*!< The 1s BCD calendar increment is generated each time SS[11:0] = 0 */ #define RTC_BINARY_MIX_BCDU_5 (0x5UL << RTC_ICSR_BCDU_Pos) /*!< The 1s BCD calendar increment is generated each time SS[12:0] = 0 */ #define RTC_BINARY_MIX_BCDU_6 (0x6UL << RTC_ICSR_BCDU_Pos) /*!< The 1s BCD calendar increment is generated each time SS[13:0] = 0 */ #define RTC_BINARY_MIX_BCDU_7 (0x7UL << RTC_ICSR_BCDU_Pos) /*!< The 1s BCD calendar increment is generated each time SS[14:0] = 0 */ /** * @} */ /** @defgroup RTCEx_Alarm_Sub_Seconds_binary_Masks_Definitions RTC Alarm Sub Seconds with binary mode Masks Definitions * @{ */ #define RTC_ALARMSUBSECONDBINMASK_ALL 0x00000000u /*!< All Alarm SS fields are masked. There is no comparison on sub seconds for Alarm */ #define RTC_ALARMSUBSECONDBINMASK_SS31_1 (1UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:1] are don't care in Alarm comparison. Only SS[0] is compared. */ #define RTC_ALARMSUBSECONDBINMASK_SS31_2 (2UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:2] are don't care in Alarm comparison. Only SS[1:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_3 (3UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:3] are don't care in Alarm comparison. Only SS[2:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_4 (4UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:4] are don't care in Alarm comparison. Only SS[3:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_5 (5UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:5] are don't care in Alarm comparison. Only SS[4:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_6 (6UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:6] are don't care in Alarm comparison. Only SS[5:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_7 (7UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:7] are don't care in Alarm comparison. Only SS[6:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_8 (8UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:8] are don't care in Alarm comparison. Only SS[7:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_9 (9UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:9] are don't care in Alarm comparison. Only SS[8:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_10 (10UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:10] are don't care in Alarm comparison. Only SS[9:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_11 (11UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:11] are don't care in Alarm comparison. Only SS[10:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_12 (12UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:12] are don't care in Alarm comparison.Only SS[11:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_13 (13UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:13] are don't care in Alarm comparison. Only SS[12:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_14 (14UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:14] are don't care in Alarm comparison. Only SS[13:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_15 (15UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:15] are don't care in Alarm comparison. Only SS[14:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_16 (16UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:16] are don't care in Alarm comparison. Only SS[15:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_17 (17UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:17] are don't care in Alarm comparison. Only SS[16:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_18 (18UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:18] are don't care in Alarm comparison. Only SS[17:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_19 (19UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:19] are don't care in Alarm comparison. Only SS[18:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_20 (20UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:20] are don't care in Alarm comparison. Only SS[19:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_21 (21UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:21] are don't care in Alarm comparison. Only SS[20:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_22 (22UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:22] are don't care in Alarm comparison. Only SS[21:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_23 (23UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:23] are don't care in Alarm comparison. Only SS[22:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_24 (24UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:24] are don't care in Alarm comparison. Only SS[23:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_25 (25UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:25] are don't care in Alarm comparison. Only SS[24:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_26 (26UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:26] are don't care in Alarm comparison. Only SS[25:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_27 (27UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:27] are don't care in Alarm comparison. Only SS[26:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_28 (28UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:28] are don't care in Alarm comparison. Only SS[27:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_29 (29UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:29] are don't care in Alarm comparison. Only SS[28:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_30 (30UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:30] are don't care in Alarm comparison. Only SS[29:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31 (31UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31] is don't care in Alarm comparison. Only SS[30:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_NONE (32UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:0] are compared and must match to activate alarm. */ /** * @} */ /** @defgroup RTCEx_Alarm_Sub_Seconds_binary_Clear_Definitions RTC Alarm Sub Seconds with binary mode auto clear Definitions * @{ */ #define RTC_ALARMSUBSECONDBIN_AUTOCLR_NO 0UL /*!< The synchronous Binary counter (SS[31:0] in RTC_SSR) is free-running. */ #define RTC_ALARMSUBSECONDBIN_AUTOCLR_YES RTC_ALRMASSR_SSCLR /*!< The synchronous Binary counter (SS[31:0] in RTC_SSR) is running from 0xFFFF FFFF to RTC_ALRMABINR -> SS[31:0] value and is automatically reloaded with 0xFFFF FFFF whenreaching RTC_ALRMABINR -> SS[31:0]. */ /** * @} */ #endif /* #if defined (STM32L4P5xx) || defined (STM32L4Q5xx) */ /** * @} */ /* Exported macros -----------------------------------------------------------*/ /** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros * @{ */ #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) /** @brief Clear the specified RTC pending flag. * @param __HANDLE__ specifies the RTC Handle. * @param __FLAG__ specifies the flag to check. * This parameter can be any combination of the following values: * @arg @ref RTC_CLEAR_ITSF Clear Internal Time-stamp flag * @arg @ref RTC_CLEAR_TSOVF Clear Time-stamp overflow flag * @arg @ref RTC_CLEAR_TSF Clear Time-stamp flag * @arg @ref RTC_CLEAR_WUTF Clear Wakeup timer flag * @arg @ref RTC_CLEAR_ALRBF Clear Alarm B flag * @arg @ref RTC_CLEAR_ALRAF Clear Alarm A flag * @retval None */ #define __HAL_RTC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SCR = (__FLAG__)) /** @brief Check whether the specified RTC flag is set or not. * @param __HANDLE__ specifies the RTC Handle. * @param __FLAG__ specifies the flag to check. * This parameter can be any combination of the following values: * @arg @ref RTC_FLAG_RECALPF Recalibration pending Flag * @arg @ref RTC_FLAG_INITF Initialization flag * @arg @ref RTC_FLAG_RSF Registers synchronization flag * @arg @ref RTC_FLAG_INITS Initialization status flag * @arg @ref RTC_FLAG_SHPF Shift operation pending flag * @arg @ref RTC_FLAG_WUTWF Wakeup timer write flag * @arg @ref RTC_FLAG_ALRBWF Alarm B write flag * @arg @ref RTC_FLAG_ALRAWF Alarm A write flag * @arg @ref RTC_FLAG_ITSF Internal Time-stamp flag * @arg @ref RTC_FLAG_TSOVF Time-stamp overflow flag * @arg @ref RTC_FLAG_TSF Time-stamp flag * @arg @ref RTC_FLAG_WUTF Wakeup timer flag * @arg @ref RTC_FLAG_ALRBF Alarm B flag * @arg @ref RTC_FLAG_ALRAF Alarm A flag * @retval None */ #define __HAL_RTC_GET_FLAG(__HANDLE__, __FLAG__) (((((__FLAG__)) >> 8U) == 1U) ? ((__HANDLE__)->Instance->ICSR & (1U << (((uint16_t)(__FLAG__)) & RTC_FLAG_MASK))) : \ ((__HANDLE__)->Instance->SR & (1U << (((uint16_t)(__FLAG__)) & RTC_FLAG_MASK)))) #endif /*#if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) */ /* ---------------------------------WAKEUPTIMER---------------------------------*/ /** @defgroup RTCEx_WakeUp_Timer RTC WakeUp Timer * @{ */ /** * @brief Enable the RTC WakeUp Timer peripheral. * @param __HANDLE__ specifies the RTC handle. * @retval None */ #define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE)) /** * @brief Disable the RTC WakeUp Timer peripheral. * @param __HANDLE__ specifies the RTC handle. * @retval None */ #define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE)) /** * @brief Enable the RTC WakeUpTimer interrupt. * @param __HANDLE__ specifies the RTC handle. * @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt sources to be enabled. * This parameter can be: * @arg @ref RTC_IT_WUT WakeUpTimer interrupt * @retval None */ #define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) /** * @brief Disable the RTC WakeUpTimer interrupt. * @param __HANDLE__ specifies the RTC handle. * @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt sources to be disabled. * This parameter can be: * @arg @ref RTC_IT_WUT WakeUpTimer interrupt * @retval None */ #define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) /** * @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not. * @param __HANDLE__ specifies the RTC handle. * @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt sources to check. * This parameter can be: * @arg @ref RTC_IT_WUT WakeUpTimer interrupt * @retval None */ #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) #define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->MISR) & ((__INTERRUPT__) >> 12)) != 0U) ? 1U : 0U) #else #define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__) >> 4)) != 0U) ? 1U : 0U) #endif /** * @brief Check whether the specified RTC Wake Up timer interrupt has been enabled or not. * @param __HANDLE__ specifies the RTC handle. * @param __INTERRUPT__ specifies the RTC Wake Up timer interrupt sources to check. * This parameter can be: * @arg @ref RTC_IT_WUT WakeUpTimer interrupt * @retval None */ #define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != 0U) ? 1U : 0U) /** * @brief Get the selected RTC WakeUpTimer's flag status. * @param __HANDLE__ specifies the RTC handle. * @param __FLAG__ specifies the RTC WakeUpTimer Flag is pending or not. * This parameter can be: * @arg @ref RTC_FLAG_WUTF * @arg @ref RTC_FLAG_WUTWF * @retval Flag status */ #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) #define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_GET_FLAG((__HANDLE__), (__FLAG__))) #else #define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != 0U) ? 1U : 0U) #endif /** * @brief Clear the RTC Wake Up timers pending flags. * @param __HANDLE__ specifies the RTC handle. * @param __FLAG__ specifies the RTC WakeUpTimer Flag to clear. * This parameter can be: * @arg @ref RTC_FLAG_WUTF * @retval None */ #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) #define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_CLEAR_FLAG((__HANDLE__), RTC_CLEAR_WUTF)) #else #define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) #endif /* WAKE-UP TIMER EXTI */ /* ------------------ */ /** * @brief Enable interrupt on the RTC WakeUp Timer associated Exti line. * @retval None */ #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() (EXTI->IMR1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) /** * @brief Disable interrupt on the RTC WakeUp Timer associated Exti line. * @retval None */ #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() (EXTI->IMR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) /** * @brief Enable event on the RTC WakeUp Timer associated Exti line. * @retval None */ #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT() (EXTI->EMR1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) /** * @brief Disable event on the RTC WakeUp Timer associated Exti line. * @retval None */ #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT() (EXTI->EMR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) /** * @brief Enable falling edge trigger on the RTC WakeUp Timer associated Exti line. * @retval None */ #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) /** * @brief Disable falling edge trigger on the RTC WakeUp Timer associated Exti line. * @retval None */ #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) /** * @brief Enable rising edge trigger on the RTC WakeUp Timer associated Exti line. * @retval None */ #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) /** * @brief Disable rising edge trigger on the RTC WakeUp Timer associated Exti line. * @retval None */ #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) /** * @brief Enable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line. * @retval None */ #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() do { \ __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE(); \ __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE(); \ } while(0) /** * @brief Disable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line. * This parameter can be: * @retval None */ #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() do { \ __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE(); \ __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE(); \ } while(0) /** * @brief Check whether the RTC WakeUp Timer associated Exti line interrupt flag is set or not. * @retval Line Status. */ #define __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() (EXTI->PR1 & RTC_EXTI_LINE_WAKEUPTIMER_EVENT) /** * @brief Clear the RTC WakeUp Timer associated Exti line flag. * @retval None */ #define __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() (EXTI->PR1 = RTC_EXTI_LINE_WAKEUPTIMER_EVENT) /** * @brief Generate a Software interrupt on the RTC WakeUp Timer associated Exti line. * @retval None */ #define __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() (EXTI->SWIER1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) /** * @} */ /* ---------------------------------TIMESTAMP---------------------------------*/ /** @defgroup RTCEx_Timestamp RTC Timestamp * @{ */ /** * @brief Enable the RTC TimeStamp peripheral. * @param __HANDLE__ specifies the RTC handle. * @retval None */ #define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE)) /** * @brief Disable the RTC TimeStamp peripheral. * @param __HANDLE__ specifies the RTC handle. * @retval None */ #define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE)) /** * @brief Enable the RTC TimeStamp interrupt. * @param __HANDLE__ specifies the RTC handle. * @param __INTERRUPT__ specifies the RTC TimeStamp interrupt source to be enabled. * This parameter can be: * @arg @ref RTC_IT_TS TimeStamp interrupt * @retval None */ #define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) /** * @brief Disable the RTC TimeStamp interrupt. * @param __HANDLE__ specifies the RTC handle. * @param __INTERRUPT__ specifies the RTC TimeStamp interrupt source to be disabled. * This parameter can be: * @arg @ref RTC_IT_TS TimeStamp interrupt * @retval None */ #define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) /** * @brief Check whether the specified RTC TimeStamp interrupt has occurred or not. * @param __HANDLE__ specifies the RTC handle. * @param __INTERRUPT__ specifies the RTC TimeStamp interrupt source to check. * This parameter can be: * @arg @ref RTC_IT_TS TimeStamp interrupt * @retval None */ #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) #define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->MISR) & ((__INTERRUPT__) >> 12)) != 0U) ? 1U : 0U) #else #define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__) >> 4)) != 0U) ? 1U : 0U) #endif /** * @brief Check whether the specified RTC Time Stamp interrupt has been enabled or not. * @param __HANDLE__ specifies the RTC handle. * @param __INTERRUPT__ specifies the RTC Time Stamp interrupt source to check. * This parameter can be: * @arg @ref RTC_IT_TS TimeStamp interrupt * @retval None */ #define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != 0U) ? 1U : 0U) /** * @brief Get the selected RTC TimeStamp's flag status. * @param __HANDLE__ specifies the RTC handle. * @param __FLAG__ specifies the RTC TimeStamp Flag is pending or not. * This parameter can be: * @arg @ref RTC_FLAG_TSF * @arg @ref RTC_FLAG_TSOVF * @retval Flag status */ #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) #define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_GET_FLAG((__HANDLE__),(__FLAG__))) #else #define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != 0U) ? 1U : 0U) #endif /** * @brief Clear the RTC Time Stamps pending flags. * @param __HANDLE__ specifies the RTC handle. * @param __FLAG__ specifies the RTC TimeStamp Flag to clear. * This parameter can be: * @arg @ref RTC_FLAG_TSF * @arg @ref RTC_FLAG_TSOVF * @retval None */ #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) #define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_CLEAR_FLAG((__HANDLE__), (__FLAG__))) #else #define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) #endif /** * @brief Enable the RTC internal TimeStamp peripheral. * @param __HANDLE__ specifies the RTC handle. * @retval None */ #define __HAL_RTC_INTERNAL_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ITSE)) /** * @brief Disable the RTC internal TimeStamp peripheral. * @param __HANDLE__ specifies the RTC handle. * @retval None */ #define __HAL_RTC_INTERNAL_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ITSE)) /** * @brief Get the selected RTC Internal Time Stamps flag status. * @param __HANDLE__ specifies the RTC handle. * @param __FLAG__ specifies the RTC Internal Time Stamp Flag is pending or not. * This parameter can be: * @arg @ref RTC_FLAG_ITSF * @retval None */ #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) #define __HAL_RTC_INTERNAL_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_GET_FLAG((__HANDLE__),(__FLAG__))) #else #define __HAL_RTC_INTERNAL_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != 0U) ? 1U : 0U) #endif /** * @brief Clear the RTC Internal Time Stamps pending flags. * @param __HANDLE__ specifies the RTC handle. * @param __FLAG__ specifies the RTC Internal Time Stamp Flag source to clear. * This parameter can be: * @arg @ref RTC_FLAG_ITSF * @retval None */ #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) #define __HAL_RTC_INTERNAL_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_CLEAR_FLAG((__HANDLE__), RTC_CLEAR_ITSF)) #else #define __HAL_RTC_INTERNAL_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) #endif #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) /** * @brief Enable the RTC TimeStamp on Tamper detection. * @param __HANDLE__ specifies the RTC handle. * @retval None */ #define __HAL_RTC_TAMPTS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TAMPTS)) /** * @brief Disable the RTC TimeStamp on Tamper detection. * @param __HANDLE__ specifies the RTC handle. * @retval None */ #define __HAL_RTC_TAMPTS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TAMPTS)) /** * @brief Enable the RTC Tamper detection output. * @param __HANDLE__ specifies the RTC handle. * @retval None */ #define __HAL_RTC_TAMPOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TAMPOE)) /** * @brief Disable the RTC Tamper detection output. * @param __HANDLE__ specifies the RTC handle. * @retval None */ #define __HAL_RTC_TAMPOE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TAMPOE)) /** * @} */ #endif /* #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) */ /* ------------------------------Calibration----------------------------------*/ /** @defgroup RTCEx_Calibration RTC Calibration * @{ */ /** * @brief Enable the RTC calibration output. * @param __HANDLE__ specifies the RTC handle. * @retval None */ #define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE)) /** * @brief Disable the calibration output. * @param __HANDLE__ specifies the RTC handle. * @retval None */ #define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE)) /** * @brief Enable the clock reference detection. * @param __HANDLE__ specifies the RTC handle. * @retval None */ #define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON)) /** * @brief Disable the clock reference detection. * @param __HANDLE__ specifies the RTC handle. * @retval None */ #define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON)) /** * @brief Get the selected RTC shift operation's flag status. * @param __HANDLE__ specifies the RTC handle. * @param __FLAG__ specifies the RTC shift operation Flag is pending or not. * This parameter can be: * @arg @ref RTC_FLAG_SHPF * @retval None */ #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) #define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_GET_FLAG((__HANDLE__), (__FLAG__))) #else #define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != 0U) ? 1U : 0U) #endif /** * @} */ /* ------------------------------Tamper----------------------------------*/ /** @defgroup RTCEx_Tamper RTCEx tamper * @{ */ #if defined(RTC_TAMPER1_SUPPORT) /** * @brief Enable the RTC Tamper1 input detection. * @param __HANDLE__ specifies the RTC handle. * @retval None */ #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) #define __HAL_RTC_TAMPER1_ENABLE(__HANDLE__) (((TAMP_TypeDef *)((uint32_t)((__HANDLE__)->Instance) + (__HANDLE__)->TampOffset))->CR1 |= (TAMP_CR1_TAMP1E)) #else #define __HAL_RTC_TAMPER1_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR |= (RTC_TAMPCR_TAMP1E)) #endif /** * @brief Disable the RTC Tamper1 input detection. * @param __HANDLE__ specifies the RTC handle. * @retval None */ #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) #define __HAL_RTC_TAMPER1_DISABLE(__HANDLE__) (((TAMP_TypeDef *)((uint32_t)((__HANDLE__)->Instance) + (__HANDLE__)->TampOffset))->CR1 &= ~(RTC_TAMPCR_TAMP1E)) #else #define __HAL_RTC_TAMPER1_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP1E)) #endif #endif /* RTC_TAMPER1_SUPPORT */ /** * @brief Enable the RTC Tamper2 input detection. * @param __HANDLE__ specifies the RTC handle. * @retval None */ #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) #define __HAL_RTC_TAMPER2_ENABLE(__HANDLE__) (((TAMP_TypeDef *)((uint32_t)((__HANDLE__)->Instance) + (__HANDLE__)->TampOffset))->CR1 |= (TAMP_CR1_TAMP2E)) #else #define __HAL_RTC_TAMPER2_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR |= (RTC_TAMPCR_TAMP2E)) #endif /** * @brief Disable the RTC Tamper2 input detection. * @param __HANDLE__ specifies the RTC handle. * @retval None */ #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) #define __HAL_RTC_TAMPER2_DISABLE(__HANDLE__) (((TAMP_TypeDef *)((uint32_t)((__HANDLE__)->Instance) + (__HANDLE__)->TampOffset))->CR1 &= ~(RTC_TAMPCR_TAMP2E)) #else #define __HAL_RTC_TAMPER2_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP2E)) #endif #if defined(RTC_TAMPER3_SUPPORT) /** * @brief Enable the RTC Tamper3 input detection. * @param __HANDLE__ specifies the RTC handle. * @retval None */ #define __HAL_RTC_TAMPER3_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR |= (RTC_TAMPCR_TAMP3E)) /** * @brief Disable the RTC Tamper3 input detection. * @param __HANDLE__ specifies the RTC handle. * @retval None */ #define __HAL_RTC_TAMPER3_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP3E)) #endif /* RTC_TAMPER3_SUPPORT */ /**************************************************************************************************/ /** * @brief Enable the TAMP Tamper interrupt. * @param __HANDLE__ specifies the RTC handle. * @param __INTERRUPT__ specifies the RTC Tamper interrupt sources to be enabled. * This parameter can be any combination of the following values: * @arg RTC_IT_TAMPALL: All tampers interrupts * @arg RTC_IT_TAMP1: Tamper1 interrupt * @arg RTC_IT_TAMP2: Tamper2 interrupt * @arg RTC_IT_TAMP3: Tamper3 interrupt * @retval None */ #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) #define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((TAMP_TypeDef *)((uint32_t)((__HANDLE__)->Instance) + (__HANDLE__)->TampOffset))->IER |= (__INTERRUPT__)) #else #define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAMPCR |= (__INTERRUPT__)) #endif /** * @brief Disable the TAMP Tamper interrupt. * @param __HANDLE__ specifies the RTC handle. * @param __INTERRUPT__ specifies the RTC Tamper interrupt sources to be disabled. * This parameter can be any combination of the following values: * @arg RTC_IT_TAMPALL: All tampers interrupts * @arg RTC_IT_TAMP1: Tamper1 interrupt * @arg RTC_IT_TAMP2: Tamper2 interrupt * @arg RTC_IT_TAMP3: Tamper3 interrupt * @retval None */ #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) #define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((TAMP_TypeDef *)((uint32_t)((__HANDLE__)->Instance) + (__HANDLE__)->TampOffset))->IER &= ~(__INTERRUPT__)) #else #define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAMPCR &= ~(__INTERRUPT__)) #endif /**************************************************************************************************/ /** * @brief Check whether the specified RTC Tamper interrupt has occurred or not. * @param __HANDLE__ specifies the RTC handle. * @param __INTERRUPT__ specifies the RTC Tamper interrupt to check. * This parameter can be: * @arg RTC_IT_TAMPALL: All tampers interrupts * @arg RTC_IT_TAMP1: Tamper1 interrupt * @arg RTC_IT_TAMP2: Tamper2 interrupt * @arg RTC_IT_TAMP3: Tamper3 interrupt * @retval None */ #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) #define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) ((((((TAMP_TypeDef *)((uint32_t)((__HANDLE__)->Instance) + (__HANDLE__)->TampOffset))->MISR) & (__INTERRUPT__)) != 0U) ? 1U : 0U) #else /* #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) */ #define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & (__INTERRUPT__)) != 0U) ? 1U : 0U) #endif /* #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) */ /** * @brief Check whether the specified RTC Tamper interrupt has been enabled or not. * @param __HANDLE__ specifies the RTC handle. * @param __INTERRUPT__ specifies the RTC Tamper interrupt source to check. * This parameter can be: * @arg RTC_IT_TAMPALL: All tampers interrupts * @arg RTC_IT_TAMP1: Tamper1 interrupt * @arg RTC_IT_TAMP2: Tamper2 interrupt * @arg RTC_IT_TAMP3: Tamper3 interrupt * @retval None */ #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) #define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((TAMP_TypeDef *)((uint32_t)((__HANDLE__)->Instance) + (__HANDLE__)->TampOffset))->IER) & (__INTERRUPT__)) != 0U) ? 1U : 0U) #else #define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->TAMPCR) & (__INTERRUPT__)) != 0U) ? 1U : 0U) #endif /** * @brief Get the selected RTC Tamper's flag status. * @param __HANDLE__ specifies the RTC handle. * @param __FLAG__ specifies the RTC Tamper Flag is pending or not. * This parameter can be: * @arg RTC_FLAG_TAMP1F: Tamper1 flag * @arg RTC_FLAG_TAMP2F: Tamper2 flag * @arg RTC_FLAG_TAMP3F: Tamper3 flag * @retval None */ #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) #define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((TAMP_TypeDef *)((uint32_t)((__HANDLE__)->Instance) + (__HANDLE__)->TampOffset))->SR) & (__FLAG__)) != 0U) #else #define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != 0U) ? 1U : 0U) #endif /** * @brief Clear the RTC Tamper's pending flags. * @param __HANDLE__ specifies the RTC handle. * @param __FLAG__ specifies the RTC Tamper Flag to clear. * This parameter can be: * @arg RTC_FLAG_TAMP1F: Tamper1 flag * @arg RTC_FLAG_TAMP2F: Tamper2 flag * @arg RTC_FLAG_TAMP3F: Tamper3 flag * @retval None */ #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) #define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((((TAMP_TypeDef *)((uint32_t)((__HANDLE__)->Instance) + (__HANDLE__)->TampOffset))->SCR) = (__FLAG__)) #else #define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) #endif /** * @brief Enable interrupt on the RTC Tamper and Timestamp associated Exti line. * @retval None */ #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT() (EXTI->IMR1 |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) /** * @brief Disable interrupt on the RTC Tamper and Timestamp associated Exti line. * @retval None */ #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT() (EXTI->IMR1 &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) /** * @brief Enable event on the RTC Tamper and Timestamp associated Exti line. * @retval None */ #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_EVENT() (EXTI->EMR1 |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) /** * @brief Disable event on the RTC Tamper and Timestamp associated Exti line. * @retval None */ #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_EVENT() (EXTI->EMR1 &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) /** * @brief Enable falling edge trigger on the RTC Tamper and Timestamp associated Exti line. * @retval None */ #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR1 |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) /** * @brief Disable falling edge trigger on the RTC Tamper and Timestamp associated Exti line. * @retval None */ #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR1 &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) /** * @brief Enable rising edge trigger on the RTC Tamper and Timestamp associated Exti line. * @retval None */ #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR1 |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) /** * @brief Disable rising edge trigger on the RTC Tamper and Timestamp associated Exti line. * @retval None */ #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR1 &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) /** * @brief Enable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line. * @retval None */ #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE() do { \ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE(); \ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE(); \ } while(0) /** * @brief Disable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line. * @retval None */ #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE() do { \ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE(); \ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE(); \ } while(0) /** * @brief Check whether the RTC Tamper and Timestamp associated Exti line interrupt flag is set or not. * @retval Line Status. */ #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG() (EXTI->PR1 & RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) /** * @brief Clear the RTC Tamper and Timestamp associated Exti line flag. * @retval None */ #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG() (EXTI->PR1 = RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) /** * @brief Generate a Software interrupt on the RTC Tamper and Timestamp associated Exti line * @retval None */ #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT() (EXTI->SWIER1 |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) /** * @} */ #if defined (STM32L4P5xx) || defined (STM32L4Q5xx) /* --------------------------------- SSR Underflow ---------------------------------*/ /** @defgroup RTCEx_SSR_Underflow RTC SSR Underflow * @{ */ /** * @brief Enable the RTC SSRU interrupt. * @param __HANDLE__ specifies the RTC handle. * @param __INTERRUPT__ specifies the RTC SSRU interrupt sources to be enabled. * This parameter can be: * @arg @ref RTC_IT_SSRU SSRU interrupt * @retval None */ #define __HAL_RTC_SSRU_ENABLE_IT(__HANDLE__, __INTERRUPT__) (RTC->CR |= (__INTERRUPT__)) /** * @brief Disable the RTC SSRU interrupt. * @param __HANDLE__ specifies the RTC handle. * @param __INTERRUPT__ specifies the RTC SSRU interrupt sources to be disabled. * This parameter can be: * @arg @ref RTC_IT_SSRU SSRU interrupt * @retval None */ #define __HAL_RTC_SSRU_DISABLE_IT(__HANDLE__, __INTERRUPT__) (RTC->CR &= ~(__INTERRUPT__)) /** * @brief Check whether the specified RTC SSRU interrupt has occurred or not. * @param __HANDLE__ specifies the RTC handle. * @param __INTERRUPT__ specifies the RTC SSRU interrupt to check. * This parameter can be: * @arg @ref RTC_IT_SSRU SSRU interrupt * @retval None */ #define __HAL_RTC_SSRU_GET_IT(__HANDLE__, __INTERRUPT__) ((((RTC->MISR) & ((__INTERRUPT__) >> 1) != 0U) ? 1U : 0U) /** * @brief Check whether the specified RTC Wake Up timer interrupt has been enabled or not. * @param __HANDLE__ specifies the RTC handle. * @param __INTERRUPT__ specifies the RTC Wake Up timer interrupt sources to check. * This parameter can be: * @arg @ref RTC_IT_SSRU SSRU interrupt * @retval None */ #define __HAL_RTC_SSRU_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((RTC->CR) & (__INTERRUPT__)) != 0U) ? 1U : 0U) /** * @brief Get the selected RTC SSRU's flag status. * @param __HANDLE__ specifies the RTC handle. * @param __FLAG__ specifies the RTC SSRU Flag is pending or not. * This parameter can be: * @arg @ref RTC_FLAG_SSRUF * @arg @ref RTC_FLAG_SSRUWF * @retval None */ #define __HAL_RTC_SSRU_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_GET_FLAG((__HANDLE__), (__FLAG__))) /** * @brief Clear the RTC Wake Up timer's pending flags. * @param __HANDLE__ specifies the RTC handle. * @param __FLAG__ specifies the RTC SSRU Flag to clear. * This parameter can be: * @arg @ref RTC_FLAG_SSRUF * @retval None */ #define __HAL_RTC_SSRU_CLEAR_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_CLEAR_FLAG((__HANDLE__), RTC_CLEAR_SSRUF)) /* WAKE-UP TIMER EXTI */ /* ------------------ */ /** * @brief Enable interrupt on the RTC SSR Underflow associated Exti line. * @retval None */ #define __HAL_RTC_SSRU_EXTI_ENABLE_IT() (EXTI->IMR1 |= RTC_EXTI_LINE_SSRU_EVENT) /** * @brief Disable interrupt on the RTC SSR Underflow associated Exti line. * @retval None */ #define __HAL_RTC_SSRU_EXTI_DISABLE_IT() (EXTI->IMR1 &= ~(RTC_EXTI_LINE_SSRU_EVENT)) /** * @brief Enable event on the RTC SSR Underflow associated Exti line. * @retval None */ #define __HAL_RTC_SSRU_EXTI_ENABLE_EVENT() (EXTI->EMR1 |= RTC_EXTI_LINE_SSRU_EVENT) /** * @brief Disable event on the RTC SSR Underflow associated Exti line. * @retval None */ #define __HAL_RTC_SSRU_EXTI_DISABLE_EVENT() (EXTI->EMR1 &= ~(RTC_EXTI_LINE_SSRU_EVENT)) /** * @} */ #endif /* #if defined (STM32L4P5xx) || defined (STM32L4Q5xx) */ /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions * @{ */ /* ========================================================================== */ /* ##### RTC TimeStamp exported functions ##### */ /* ========================================================================== */ /* RTC TimeStamp functions ****************************************************/ /** @defgroup RTCEx_Exported_Functions_Group1 Extended RTC TimeStamp functions * @{ */ HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin); HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin); HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc); HAL_StatusTypeDef HAL_RTCEx_SetInternalTimeStamp(RTC_HandleTypeDef *hrtc); HAL_StatusTypeDef HAL_RTCEx_DeactivateInternalTimeStamp(RTC_HandleTypeDef *hrtc); HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format); void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc); void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc); HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); /** * @} */ /* ========================================================================== */ /* ##### RTC Wake-up exported functions ##### */ /* ========================================================================== */ /* RTC Wake-up functions ******************************************************/ /** @defgroup RTCEx_Exported_Functions_Group2 Extended RTC Wake-up functions * @{ */ HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock); #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock, uint32_t WakeUpAutoClr); #else HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock); #endif HAL_StatusTypeDef HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc); uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc); void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc); void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc); HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); /** * @} */ /* ========================================================================== */ /* ##### Extended RTC Peripheral Control exported functions ##### */ /* ========================================================================== */ /* Extended RTC Peripheral Control functions **********************************/ /** @defgroup RTCEx_Exported_Functions_Group3 Extended Peripheral Control functions * @{ */ HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmoothCalibMinusPulsesValue); #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) HAL_StatusTypeDef HAL_RTCEx_SetLowPowerCalib(RTC_HandleTypeDef *hrtc, uint32_t LowPowerCalib); #endif HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS); HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput); HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc); HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc); HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc); HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc); HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc); #if defined (STM32L4P5xx) || defined (STM32L4Q5xx) HAL_StatusTypeDef HAL_RTCEx_SetSSRU_IT(RTC_HandleTypeDef *hrtc); HAL_StatusTypeDef HAL_RTCEx_DeactivateSSRU(RTC_HandleTypeDef *hrtc); void HAL_RTCEx_SSRUIRQHandler(RTC_HandleTypeDef *hrtc); void HAL_RTCEx_SSRUEventCallback(RTC_HandleTypeDef *hrtc); #endif /** * @} */ /* Extended RTC features functions *******************************************/ /** @defgroup RTCEx_Exported_Functions_Group4 Extended features functions * @{ */ void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc); HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); /** * @} */ /** @defgroup RTCEx_Exported_Functions_Group5 Extended RTC Tamper functions * @{ */ HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper); HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper); HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper); #if defined(RTC_TAMPER1_SUPPORT) HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout); #endif /* RTC_TAMPER1_SUPPORT */ HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout); #if defined(RTC_TAMPER3_SUPPORT) HAL_StatusTypeDef HAL_RTCEx_PollForTamper3Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout); #endif /* RTC_TAMPER3_SUPPORT */ #if defined(RTC_TAMPER1_SUPPORT) void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc); #endif /* RTC_TAMPER1_SUPPORT */ void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc); #if defined(RTC_TAMPER3_SUPPORT) void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc); #endif /* RTC_TAMPER3_SUPPORT */ /** * @} */ /** @defgroup RTCEx_Exported_Functions_Group6 Extended RTC Backup register functions * @{ */ void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data); uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister); /** * @} */ /** * @} */ /* Private types -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private constants ---------------------------------------------------------*/ /** @defgroup RTCEx_Private_Constants RTCEx Private Constants * @{ */ #if defined (STM32L4P5xx) || defined (STM32L4Q5xx) #define RTC_EXTI_LINE_SSRU_EVENT EXTI_IMR1_IM18 /*!< External interrupt line 18 Connected to the RTC SSR Underflow event */ #endif #define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT EXTI_IMR1_IM19 /*!< External interrupt line 19 Connected to the RTC Tamper and Time Stamp events */ #define RTC_EXTI_LINE_WAKEUPTIMER_EVENT EXTI_IMR1_IM20 /*!< External interrupt line 20 Connected to the RTC Wakeup event */ /** * @} */ /* Private macros ------------------------------------------------------------*/ /** @defgroup RTCEx_Private_Macros RTCEx Private Macros * @{ */ /** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters * @{ */ #define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \ ((EDGE) == RTC_TIMESTAMPEDGE_FALLING)) #define IS_RTC_TAMPER_INTERRUPT(INTERRUPT) ((((INTERRUPT) & (uint32_t)0xFFB6FFFB) == 0x00) && ((INTERRUPT) != 0U)) #define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_DEFAULT)) #define IS_RTC_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16) || \ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8) || \ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4) || \ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2) || \ ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \ ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS)) #define IS_RTC_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= RTC_WUTR_WUT) #define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \ ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \ ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_8SEC)) #define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \ ((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET)) #define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= RTC_CALR_CALM) #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) #define IS_RTC_LOW_POWER_CALIB(LPCAL) (((LPCAL) == RTC_LPCAL_SET) || \ ((LPCAL) == RTC_LPCAL_RESET)) #endif #if defined(STM32L412xx) || defined(STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) #define IS_RTC_TAMPER(__TAMPER__) ((((__TAMPER__) & RTC_TAMPER_ALL) != 0x00U) && \ (((__TAMPER__) & ~RTC_TAMPER_ALL) == 0x00U)) #else #define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & (uint32_t)0xFFFFFFD6) == 0x00) && ((TAMPER) != 0U)) #endif #define IS_RTC_TAMPER_TRIGGER(__TRIGGER__) (((__TRIGGER__) == RTC_TAMPERTRIGGER_RISINGEDGE) || \ ((__TRIGGER__) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \ ((__TRIGGER__) == RTC_TAMPERTRIGGER_LOWLEVEL) || \ ((__TRIGGER__) == RTC_TAMPERTRIGGER_HIGHLEVEL)) #define IS_RTC_TAMPER_ERASE_MODE(__MODE__) (((__MODE__) == RTC_TAMPER_ERASE_BACKUP_ENABLE) || \ ((__MODE__) == RTC_TAMPER_ERASE_BACKUP_DISABLE)) #define IS_RTC_TAMPER_MASKFLAG_STATE(__STATE__) (((__STATE__) == RTC_TAMPERMASK_FLAG_ENABLE) || \ ((__STATE__) == RTC_TAMPERMASK_FLAG_DISABLE)) #define IS_RTC_TAMPER_FILTER(__FILTER__) (((__FILTER__) == RTC_TAMPERFILTER_DISABLE) || \ ((__FILTER__) == RTC_TAMPERFILTER_2SAMPLE) || \ ((__FILTER__) == RTC_TAMPERFILTER_4SAMPLE) || \ ((__FILTER__) == RTC_TAMPERFILTER_8SAMPLE)) #define IS_RTC_TAMPER_SAMPLING_FREQ(__FREQ__) (((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \ ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \ ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \ ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \ ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \ ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \ ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512) || \ ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256)) #define IS_RTC_TAMPER_PRECHARGE_DURATION(__DURATION__) (((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \ ((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \ ((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \ ((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK)) #define IS_RTC_TAMPER_PULLUP_STATE(__STATE__) (((__STATE__) == RTC_TAMPER_PULLUP_ENABLE) || \ ((__STATE__) == RTC_TAMPER_PULLUP_DISABLE)) #define IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \ ((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE)) #define IS_RTC_BKP(__BKP__) ((__BKP__) < RTC_BKP_NUMBER) #define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \ ((SEL) == RTC_SHIFTADD1S_SET)) #define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= RTC_SHIFTR_SUBFS) #define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \ ((OUTPUT) == RTC_CALIBOUTPUT_1HZ)) #if defined (STM32L4P5xx) || defined (STM32L4Q5xx) #define IS_RTC_BINARY_MODE(MODE) (((MODE) == RTC_BINARY_NONE) || \ ((MODE) == RTC_BINARY_ONLY) || \ ((MODE) == RTC_BINARY_MIX )) #define IS_RTC_BINARY_MIX_BCDU(BDCU) (((BDCU) == RTC_BINARY_MIX_BCDU_0) || \ ((BDCU) == RTC_BINARY_MIX_BCDU_1) || \ ((BDCU) == RTC_BINARY_MIX_BCDU_2) || \ ((BDCU) == RTC_BINARY_MIX_BCDU_3) || \ ((BDCU) == RTC_BINARY_MIX_BCDU_4) || \ ((BDCU) == RTC_BINARY_MIX_BCDU_5) || \ ((BDCU) == RTC_BINARY_MIX_BCDU_6) || \ ((BDCU) == RTC_BINARY_MIX_BCDU_7)) #define IS_RTC_ALARM_SUB_SECOND_BINARY_MASK(MASK) (((MASK) == 0u) || \ (((MASK) >= RTC_ALARMSUBSECONDBINMASK_SS31_1) && ((MASK) <= RTC_ALARMSUBSECONDBINMASK_NONE))) #define IS_RTC_ALARMSUBSECONDBIN_AUTOCLR(SEL) (((SEL) == RTC_ALARMSUBSECONDBIN_AUTOCLR_NO) || \ ((SEL) == RTC_ALARMSUBSECONDBIN_AUTOCLR_YES)) #endif /* #if defined (STM32L4P5xx) || defined (STM32L4Q5xx) */ /** * @} */ /** * @} */ /** * @} */ /** * @} */ #ifdef __cplusplus } #endif /* __cplusplus */ #endif /* STM32L4xx_HAL_RTC_EX_H */