1640 lines
52 KiB
C
1640 lines
52 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32h7xx_hal_spdifrx.c
|
|
* @author MCD Application Team
|
|
* @brief This file provides firmware functions to manage the following
|
|
* functionalities of the SPDIFRX audio interface:
|
|
* + Initialization and Configuration
|
|
* + Data transfers functions
|
|
* + DMA transfers management
|
|
* + Interrupts and flags management
|
|
*
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* Copyright (c) 2017 STMicroelectronics.
|
|
* All rights reserved.
|
|
*
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
|
* in the root directory of this software component.
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
|
*
|
|
******************************************************************************
|
|
@verbatim
|
|
===============================================================================
|
|
##### How to use this driver #####
|
|
===============================================================================
|
|
[..]
|
|
The SPDIFRX HAL driver can be used as follow:
|
|
|
|
(#) Declare SPDIFRX_HandleTypeDef handle structure.
|
|
(#) Initialize the SPDIFRX low level resources by implement the HAL_SPDIFRX_MspInit() API:
|
|
(##) Enable the SPDIFRX interface clock.
|
|
(##) SPDIFRX pins configuration:
|
|
(+++) Enable the clock for the SPDIFRX GPIOs.
|
|
(+++) Configure these SPDIFRX pins as alternate function pull-up.
|
|
(##) NVIC configuration if you need to use interrupt process (HAL_SPDIFRX_ReceiveCtrlFlow_IT() and HAL_SPDIFRX_ReceiveDataFlow_IT() API's).
|
|
(+++) Configure the SPDIFRX interrupt priority.
|
|
(+++) Enable the NVIC SPDIFRX IRQ handle.
|
|
(##) DMA Configuration if you need to use DMA process (HAL_SPDIFRX_ReceiveDataFlow_DMA() and HAL_SPDIFRX_ReceiveCtrlFlow_DMA() API's).
|
|
(+++) Declare a DMA handle structure for the reception of the Data Flow channel.
|
|
(+++) Declare a DMA handle structure for the reception of the Control Flow channel.
|
|
(+++) Enable the DMAx interface clock.
|
|
(+++) Configure the declared DMA handle structure CtrlRx/DataRx with the required parameters.
|
|
(+++) Configure the DMA Channel.
|
|
(+++) Associate the initialized DMA handle to the SPDIFRX DMA CtrlRx/DataRx handle.
|
|
(+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the
|
|
DMA CtrlRx/DataRx channel.
|
|
|
|
(#) Program the input selection, re-tries number, wait for activity, channel status selection, data format, stereo mode and masking of user bits
|
|
using HAL_SPDIFRX_Init() function.
|
|
|
|
-@- The specific SPDIFRX interrupts (RXNE/CSRNE and Error Interrupts) will be managed using the macros
|
|
__SPDIFRX_ENABLE_IT() and __SPDIFRX_DISABLE_IT() inside the receive process.
|
|
-@- Make sure that ck_spdif clock is configured.
|
|
|
|
(#) Three operation modes are available within this driver :
|
|
|
|
*** Polling mode for reception operation (for debug purpose) ***
|
|
================================================================
|
|
[..]
|
|
(+) Receive data flow in blocking mode using HAL_SPDIFRX_ReceiveDataFlow()
|
|
(+) Receive control flow of data in blocking mode using HAL_SPDIFRX_ReceiveCtrlFlow()
|
|
|
|
*** Interrupt mode for reception operation ***
|
|
=========================================
|
|
[..]
|
|
(+) Receive an amount of data (Data Flow) in non blocking mode using HAL_SPDIFRX_ReceiveDataFlow_IT()
|
|
(+) Receive an amount of data (Control Flow) in non blocking mode using HAL_SPDIFRX_ReceiveCtrlFlow_IT()
|
|
(+) At reception end of half transfer HAL_SPDIFRX_RxHalfCpltCallback is executed and user can
|
|
add his own code by customization of function pointer HAL_SPDIFRX_RxHalfCpltCallback
|
|
(+) At reception end of transfer HAL_SPDIFRX_RxCpltCallback is executed and user can
|
|
add his own code by customization of function pointer HAL_SPDIFRX_RxCpltCallback
|
|
(+) In case of transfer Error, HAL_SPDIFRX_ErrorCallback() function is executed and user can
|
|
add his own code by customization of function pointer HAL_SPDIFRX_ErrorCallback
|
|
|
|
*** DMA mode for reception operation ***
|
|
========================================
|
|
[..]
|
|
(+) Receive an amount of data (Data Flow) in non blocking mode (DMA) using HAL_SPDIFRX_ReceiveDataFlow_DMA()
|
|
(+) Receive an amount of data (Control Flow) in non blocking mode (DMA) using HAL_SPDIFRX_ReceiveCtrlFlow_DMA()
|
|
(+) At reception end of half transfer HAL_SPDIFRX_RxHalfCpltCallback is executed and user can
|
|
add his own code by customization of function pointer HAL_SPDIFRX_RxHalfCpltCallback
|
|
(+) At reception end of transfer HAL_SPDIFRX_RxCpltCallback is executed and user can
|
|
add his own code by customization of function pointer HAL_SPDIFRX_RxCpltCallback
|
|
(+) In case of transfer Error, HAL_SPDIFRX_ErrorCallback() function is executed and user can
|
|
add his own code by customization of function pointer HAL_SPDIFRX_ErrorCallback
|
|
(+) Stop the DMA Transfer using HAL_SPDIFRX_DMAStop()
|
|
|
|
*** SPDIFRX HAL driver macros list ***
|
|
=============================================
|
|
[..]
|
|
Below the list of most used macros in SPDIFRX HAL driver.
|
|
(+) __HAL_SPDIFRX_IDLE: Disable the specified SPDIFRX peripheral (IDEL State)
|
|
(+) __HAL_SPDIFRX_SYNC: Enable the synchronization state of the specified SPDIFRX peripheral (SYNC State)
|
|
(+) __HAL_SPDIFRX_RCV: Enable the receive state of the specified SPDIFRX peripheral (RCV State)
|
|
(+) __HAL_SPDIFRX_ENABLE_IT : Enable the specified SPDIFRX interrupts
|
|
(+) __HAL_SPDIFRX_DISABLE_IT : Disable the specified SPDIFRX interrupts
|
|
(+) __HAL_SPDIFRX_GET_FLAG: Check whether the specified SPDIFRX flag is set or not.
|
|
|
|
[..]
|
|
(@) You can refer to the SPDIFRX HAL driver header file for more useful macros
|
|
|
|
*** Callback registration ***
|
|
=============================================
|
|
|
|
The compilation define USE_HAL_SPDIFRX_REGISTER_CALLBACKS when set to 1
|
|
allows the user to configure dynamically the driver callbacks.
|
|
Use HAL_SPDIFRX_RegisterCallback() function to register an interrupt callback.
|
|
|
|
The HAL_SPDIFRX_RegisterCallback() function allows to register the following callbacks:
|
|
(+) RxHalfCpltCallback : SPDIFRX Data flow half completed callback.
|
|
(+) RxCpltCallback : SPDIFRX Data flow completed callback.
|
|
(+) CxHalfCpltCallback : SPDIFRX Control flow half completed callback.
|
|
(+) CxCpltCallback : SPDIFRX Control flow completed callback.
|
|
(+) ErrorCallback : SPDIFRX error callback.
|
|
(+) MspInitCallback : SPDIFRX MspInit.
|
|
(+) MspDeInitCallback : SPDIFRX MspDeInit.
|
|
This function takes as parameters the HAL peripheral handle, the Callback ID
|
|
and a pointer to the user callback function.
|
|
|
|
Use HAL_SPDIFRX_UnRegisterCallback() function to reset a callback to the default
|
|
weak function.
|
|
The HAL_SPDIFRX_UnRegisterCallback() function takes as parameters the HAL peripheral handle,
|
|
and the Callback ID.
|
|
This function allows to reset the following callbacks:
|
|
(+) RxHalfCpltCallback : SPDIFRX Data flow half completed callback.
|
|
(+) RxCpltCallback : SPDIFRX Data flow completed callback.
|
|
(+) CxHalfCpltCallback : SPDIFRX Control flow half completed callback.
|
|
(+) CxCpltCallback : SPDIFRX Control flow completed callback.
|
|
(+) ErrorCallback : SPDIFRX error callback.
|
|
(+) MspInitCallback : SPDIFRX MspInit.
|
|
(+) MspDeInitCallback : SPDIFRX MspDeInit.
|
|
|
|
By default, after the HAL_SPDIFRX_Init() and when the state is HAL_SPDIFRX_STATE_RESET
|
|
all callbacks are set to the corresponding weak functions :
|
|
HAL_SPDIFRX_RxHalfCpltCallback() , HAL_SPDIFRX_RxCpltCallback(), HAL_SPDIFRX_CxHalfCpltCallback(),
|
|
HAL_SPDIFRX_CxCpltCallback() and HAL_SPDIFRX_ErrorCallback()
|
|
Exception done for MspInit and MspDeInit functions that are
|
|
reset to the legacy weak function in the HAL_SPDIFRX_Init()/ HAL_SPDIFRX_DeInit() only when
|
|
these callbacks pointers are NULL (not registered beforehand).
|
|
If not, MspInit or MspDeInit callbacks pointers are not null, the HAL_SPDIFRX_Init() / HAL_SPDIFRX_DeInit()
|
|
keep and use the user MspInit/MspDeInit functions (registered beforehand)
|
|
|
|
Callbacks can be registered/unregistered in HAL_SPDIFRX_STATE_READY state only.
|
|
Exception done MspInit/MspDeInit callbacks that can be registered/unregistered
|
|
in HAL_SPDIFRX_STATE_READY or HAL_SPDIFRX_STATE_RESET state,
|
|
thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit.
|
|
In that case first register the MspInit/MspDeInit user callbacks
|
|
using HAL_SPDIFRX_RegisterCallback() before calling HAL_SPDIFRX_DeInit()
|
|
or HAL_SPDIFRX_Init() function.
|
|
|
|
When The compilation define USE_HAL_SPDIFRX_REGISTER_CALLBACKS is set to 0 or
|
|
not defined, the callback registration feature is not available and all callbacks
|
|
are set to the corresponding weak functions.
|
|
|
|
@endverbatim
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32h7xx_hal.h"
|
|
|
|
/** @addtogroup STM32H7xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup SPDIFRX SPDIFRX
|
|
* @brief SPDIFRX HAL module driver
|
|
* @{
|
|
*/
|
|
|
|
#ifdef HAL_SPDIFRX_MODULE_ENABLED
|
|
#if defined (SPDIFRX)
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* Private define ------------------------------------------------------------*/
|
|
#define SPDIFRX_TIMEOUT_VALUE 0xFFFFU
|
|
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
/** @addtogroup SPDIFRX_Private_Functions
|
|
* @{
|
|
*/
|
|
static void SPDIFRX_DMARxCplt(DMA_HandleTypeDef *hdma);
|
|
static void SPDIFRX_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
|
|
static void SPDIFRX_DMACxCplt(DMA_HandleTypeDef *hdma);
|
|
static void SPDIFRX_DMACxHalfCplt(DMA_HandleTypeDef *hdma);
|
|
static void SPDIFRX_DMAError(DMA_HandleTypeDef *hdma);
|
|
static void SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif);
|
|
static void SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif);
|
|
static HAL_StatusTypeDef SPDIFRX_WaitOnFlagUntilTimeout(SPDIFRX_HandleTypeDef *hspdif, uint32_t Flag,
|
|
FlagStatus Status, uint32_t Timeout, uint32_t tickstart);
|
|
/**
|
|
* @}
|
|
*/
|
|
/* Exported functions ---------------------------------------------------------*/
|
|
|
|
/** @defgroup SPDIFRX_Exported_Functions SPDIFRX Exported Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup SPDIFRX_Exported_Functions_Group1 Initialization and de-initialization functions
|
|
* @brief Initialization and Configuration functions
|
|
*
|
|
@verbatim
|
|
===============================================================================
|
|
##### Initialization and de-initialization functions #####
|
|
===============================================================================
|
|
[..] This subsection provides a set of functions allowing to initialize and
|
|
de-initialize the SPDIFRX peripheral:
|
|
|
|
(+) User must Implement HAL_SPDIFRX_MspInit() function in which he configures
|
|
all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
|
|
|
|
(+) Call the function HAL_SPDIFRX_Init() to configure the SPDIFRX peripheral with
|
|
the selected configuration:
|
|
(++) Input Selection (IN0, IN1,...)
|
|
(++) Maximum allowed re-tries during synchronization phase
|
|
(++) Wait for activity on SPDIF selected input
|
|
(++) Channel status selection (from channel A or B)
|
|
(++) Data format (LSB, MSB, ...)
|
|
(++) Stereo mode
|
|
(++) User bits masking (PT,C,U,V,...)
|
|
|
|
(+) Call the function HAL_SPDIFRX_DeInit() to restore the default configuration
|
|
of the selected SPDIFRXx peripheral.
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Initializes the SPDIFRX according to the specified parameters
|
|
* in the SPDIFRX_InitTypeDef and create the associated handle.
|
|
* @param hspdif SPDIFRX handle
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_SPDIFRX_Init(SPDIFRX_HandleTypeDef *hspdif)
|
|
{
|
|
uint32_t tmpreg;
|
|
|
|
/* Check the SPDIFRX handle allocation */
|
|
if (hspdif == NULL)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Check the SPDIFRX parameters */
|
|
assert_param(IS_STEREO_MODE(hspdif->Init.StereoMode));
|
|
assert_param(IS_SPDIFRX_INPUT_SELECT(hspdif->Init.InputSelection));
|
|
assert_param(IS_SPDIFRX_MAX_RETRIES(hspdif->Init.Retries));
|
|
assert_param(IS_SPDIFRX_WAIT_FOR_ACTIVITY(hspdif->Init.WaitForActivity));
|
|
assert_param(IS_SPDIFRX_CHANNEL(hspdif->Init.ChannelSelection));
|
|
assert_param(IS_SPDIFRX_DATA_FORMAT(hspdif->Init.DataFormat));
|
|
assert_param(IS_PREAMBLE_TYPE_MASK(hspdif->Init.PreambleTypeMask));
|
|
assert_param(IS_CHANNEL_STATUS_MASK(hspdif->Init.ChannelStatusMask));
|
|
assert_param(IS_VALIDITY_MASK(hspdif->Init.ValidityBitMask));
|
|
assert_param(IS_PARITY_ERROR_MASK(hspdif->Init.ParityErrorMask));
|
|
assert_param(IS_SYMBOL_CLOCK_GEN(hspdif->Init.SymbolClockGen));
|
|
assert_param(IS_SYMBOL_CLOCK_GEN(hspdif->Init.BackupSymbolClockGen));
|
|
|
|
#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1)
|
|
if (hspdif->State == HAL_SPDIFRX_STATE_RESET)
|
|
{
|
|
/* Allocate lock resource and initialize it */
|
|
hspdif->Lock = HAL_UNLOCKED;
|
|
|
|
hspdif->RxHalfCpltCallback = HAL_SPDIFRX_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */
|
|
hspdif->RxCpltCallback = HAL_SPDIFRX_RxCpltCallback; /* Legacy weak RxCpltCallback */
|
|
hspdif->CxHalfCpltCallback = HAL_SPDIFRX_CxHalfCpltCallback; /* Legacy weak CxHalfCpltCallback */
|
|
hspdif->CxCpltCallback = HAL_SPDIFRX_CxCpltCallback; /* Legacy weak CxCpltCallback */
|
|
hspdif->ErrorCallback = HAL_SPDIFRX_ErrorCallback; /* Legacy weak ErrorCallback */
|
|
|
|
if (hspdif->MspInitCallback == NULL)
|
|
{
|
|
hspdif->MspInitCallback = HAL_SPDIFRX_MspInit; /* Legacy weak MspInit */
|
|
}
|
|
|
|
/* Init the low level hardware */
|
|
hspdif->MspInitCallback(hspdif);
|
|
}
|
|
#else
|
|
if (hspdif->State == HAL_SPDIFRX_STATE_RESET)
|
|
{
|
|
/* Allocate lock resource and initialize it */
|
|
hspdif->Lock = HAL_UNLOCKED;
|
|
/* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
|
|
HAL_SPDIFRX_MspInit(hspdif);
|
|
}
|
|
#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */
|
|
|
|
/* SPDIFRX peripheral state is BUSY */
|
|
hspdif->State = HAL_SPDIFRX_STATE_BUSY;
|
|
|
|
/* Disable SPDIFRX interface (IDLE State) */
|
|
__HAL_SPDIFRX_IDLE(hspdif);
|
|
|
|
/* Reset the old SPDIFRX CR configuration */
|
|
tmpreg = hspdif->Instance->CR;
|
|
|
|
tmpreg &= ~(SPDIFRX_CR_RXSTEO | SPDIFRX_CR_DRFMT | SPDIFRX_CR_PMSK |
|
|
SPDIFRX_CR_VMSK | SPDIFRX_CR_CUMSK | SPDIFRX_CR_PTMSK |
|
|
SPDIFRX_CR_CHSEL | SPDIFRX_CR_NBTR | SPDIFRX_CR_WFA |
|
|
SPDIFRX_CR_CKSEN | SPDIFRX_CR_CKSBKPEN |
|
|
SPDIFRX_CR_INSEL);
|
|
|
|
/* Sets the new configuration of the SPDIFRX peripheral */
|
|
tmpreg |= (hspdif->Init.StereoMode |
|
|
hspdif->Init.InputSelection |
|
|
hspdif->Init.Retries |
|
|
hspdif->Init.WaitForActivity |
|
|
hspdif->Init.ChannelSelection |
|
|
hspdif->Init.DataFormat |
|
|
hspdif->Init.PreambleTypeMask |
|
|
hspdif->Init.ChannelStatusMask |
|
|
hspdif->Init.ValidityBitMask |
|
|
hspdif->Init.ParityErrorMask
|
|
);
|
|
|
|
if (hspdif->Init.SymbolClockGen == ENABLE)
|
|
{
|
|
tmpreg |= SPDIFRX_CR_CKSEN;
|
|
}
|
|
|
|
if (hspdif->Init.BackupSymbolClockGen == ENABLE)
|
|
{
|
|
tmpreg |= SPDIFRX_CR_CKSBKPEN;
|
|
}
|
|
|
|
hspdif->Instance->CR = tmpreg;
|
|
|
|
hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
|
|
|
|
/* SPDIFRX peripheral state is READY*/
|
|
hspdif->State = HAL_SPDIFRX_STATE_READY;
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief DeInitializes the SPDIFRX peripheral
|
|
* @param hspdif SPDIFRX handle
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_SPDIFRX_DeInit(SPDIFRX_HandleTypeDef *hspdif)
|
|
{
|
|
/* Check the SPDIFRX handle allocation */
|
|
if (hspdif == NULL)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_SPDIFRX_ALL_INSTANCE(hspdif->Instance));
|
|
|
|
hspdif->State = HAL_SPDIFRX_STATE_BUSY;
|
|
|
|
/* Disable SPDIFRX interface (IDLE state) */
|
|
__HAL_SPDIFRX_IDLE(hspdif);
|
|
|
|
#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1)
|
|
if (hspdif->MspDeInitCallback == NULL)
|
|
{
|
|
hspdif->MspDeInitCallback = HAL_SPDIFRX_MspDeInit; /* Legacy weak MspDeInit */
|
|
}
|
|
|
|
/* DeInit the low level hardware */
|
|
hspdif->MspDeInitCallback(hspdif);
|
|
#else
|
|
/* DeInit the low level hardware: GPIO, CLOCK, NVIC... */
|
|
HAL_SPDIFRX_MspDeInit(hspdif);
|
|
#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */
|
|
|
|
hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
|
|
|
|
/* SPDIFRX peripheral state is RESET*/
|
|
hspdif->State = HAL_SPDIFRX_STATE_RESET;
|
|
|
|
/* Release Lock */
|
|
__HAL_UNLOCK(hspdif);
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief SPDIFRX MSP Init
|
|
* @param hspdif SPDIFRX handle
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_SPDIFRX_MspInit(SPDIFRX_HandleTypeDef *hspdif)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hspdif);
|
|
|
|
/* NOTE : This function Should not be modified, when the callback is needed,
|
|
the HAL_SPDIFRX_MspInit could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief SPDIFRX MSP DeInit
|
|
* @param hspdif SPDIFRX handle
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_SPDIFRX_MspDeInit(SPDIFRX_HandleTypeDef *hspdif)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hspdif);
|
|
|
|
/* NOTE : This function Should not be modified, when the callback is needed,
|
|
the HAL_SPDIFRX_MspDeInit could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1)
|
|
/**
|
|
* @brief Register a User SPDIFRX Callback
|
|
* To be used instead of the weak predefined callback
|
|
* @param hspdif SPDIFRX handle
|
|
* @param CallbackID ID of the callback to be registered
|
|
* This parameter can be one of the following values:
|
|
* @arg @ref HAL_SPDIFRX_RX_HALF_CB_ID SPDIFRX Data flow half completed callback ID
|
|
* @arg @ref HAL_SPDIFRX_RX_CPLT_CB_ID SPDIFRX Data flow completed callback ID
|
|
* @arg @ref HAL_SPDIFRX_CX_HALF_CB_ID SPDIFRX Control flow half completed callback ID
|
|
* @arg @ref HAL_SPDIFRX_CX_CPLT_CB_ID SPDIFRX Control flow completed callback ID
|
|
* @arg @ref HAL_SPDIFRX_ERROR_CB_ID SPDIFRX error callback ID
|
|
* @arg @ref HAL_SPDIFRX_MSPINIT_CB_ID MspInit callback ID
|
|
* @arg @ref HAL_SPDIFRX_MSPDEINIT_CB_ID MspDeInit callback ID
|
|
* @param pCallback pointer to the Callback function
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_SPDIFRX_RegisterCallback(SPDIFRX_HandleTypeDef *hspdif, HAL_SPDIFRX_CallbackIDTypeDef CallbackID,
|
|
pSPDIFRX_CallbackTypeDef pCallback)
|
|
{
|
|
HAL_StatusTypeDef status = HAL_OK;
|
|
|
|
if (pCallback == NULL)
|
|
{
|
|
/* Update the error code */
|
|
hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_INVALID_CALLBACK;
|
|
return HAL_ERROR;
|
|
}
|
|
/* Process locked */
|
|
__HAL_LOCK(hspdif);
|
|
|
|
if (HAL_SPDIFRX_STATE_READY == hspdif->State)
|
|
{
|
|
switch (CallbackID)
|
|
{
|
|
case HAL_SPDIFRX_RX_HALF_CB_ID :
|
|
hspdif->RxHalfCpltCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_SPDIFRX_RX_CPLT_CB_ID :
|
|
hspdif->RxCpltCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_SPDIFRX_CX_HALF_CB_ID :
|
|
hspdif->CxHalfCpltCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_SPDIFRX_CX_CPLT_CB_ID :
|
|
hspdif->CxCpltCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_SPDIFRX_ERROR_CB_ID :
|
|
hspdif->ErrorCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_SPDIFRX_MSPINIT_CB_ID :
|
|
hspdif->MspInitCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_SPDIFRX_MSPDEINIT_CB_ID :
|
|
hspdif->MspDeInitCallback = pCallback;
|
|
break;
|
|
|
|
default :
|
|
/* Update the error code */
|
|
hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_INVALID_CALLBACK;
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
break;
|
|
}
|
|
}
|
|
else if (HAL_SPDIFRX_STATE_RESET == hspdif->State)
|
|
{
|
|
switch (CallbackID)
|
|
{
|
|
case HAL_SPDIFRX_MSPINIT_CB_ID :
|
|
hspdif->MspInitCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_SPDIFRX_MSPDEINIT_CB_ID :
|
|
hspdif->MspDeInitCallback = pCallback;
|
|
break;
|
|
|
|
default :
|
|
/* Update the error code */
|
|
hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_INVALID_CALLBACK;
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
break;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Update the error code */
|
|
hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_INVALID_CALLBACK;
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
}
|
|
|
|
/* Release Lock */
|
|
__HAL_UNLOCK(hspdif);
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* @brief Unregister a SPDIFRX Callback
|
|
* SPDIFRX callback is redirected to the weak predefined callback
|
|
* @param hspdif SPDIFRX handle
|
|
* @param CallbackID ID of the callback to be unregistered
|
|
* This parameter can be one of the following values:
|
|
* @arg @ref HAL_SPDIFRX_RX_HALF_CB_ID SPDIFRX Data flow half completed callback ID
|
|
* @arg @ref HAL_SPDIFRX_RX_CPLT_CB_ID SPDIFRX Data flow completed callback ID
|
|
* @arg @ref HAL_SPDIFRX_CX_HALF_CB_ID SPDIFRX Control flow half completed callback ID
|
|
* @arg @ref HAL_SPDIFRX_CX_CPLT_CB_ID SPDIFRX Control flow completed callback ID
|
|
* @arg @ref HAL_SPDIFRX_ERROR_CB_ID SPDIFRX error callback ID
|
|
* @arg @ref HAL_SPDIFRX_MSPINIT_CB_ID MspInit callback ID
|
|
* @arg @ref HAL_SPDIFRX_MSPDEINIT_CB_ID MspDeInit callback ID
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_SPDIFRX_UnRegisterCallback(SPDIFRX_HandleTypeDef *hspdif,
|
|
HAL_SPDIFRX_CallbackIDTypeDef CallbackID)
|
|
{
|
|
HAL_StatusTypeDef status = HAL_OK;
|
|
|
|
/* Process locked */
|
|
__HAL_LOCK(hspdif);
|
|
|
|
if (HAL_SPDIFRX_STATE_READY == hspdif->State)
|
|
{
|
|
switch (CallbackID)
|
|
{
|
|
case HAL_SPDIFRX_RX_HALF_CB_ID :
|
|
hspdif->RxHalfCpltCallback = HAL_SPDIFRX_RxHalfCpltCallback;
|
|
break;
|
|
|
|
case HAL_SPDIFRX_RX_CPLT_CB_ID :
|
|
hspdif->RxCpltCallback = HAL_SPDIFRX_RxCpltCallback;
|
|
break;
|
|
|
|
case HAL_SPDIFRX_CX_HALF_CB_ID :
|
|
hspdif->CxHalfCpltCallback = HAL_SPDIFRX_CxHalfCpltCallback;
|
|
break;
|
|
|
|
case HAL_SPDIFRX_CX_CPLT_CB_ID :
|
|
hspdif->CxCpltCallback = HAL_SPDIFRX_CxCpltCallback;
|
|
break;
|
|
|
|
case HAL_SPDIFRX_ERROR_CB_ID :
|
|
hspdif->ErrorCallback = HAL_SPDIFRX_ErrorCallback;
|
|
break;
|
|
|
|
default :
|
|
/* Update the error code */
|
|
hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_INVALID_CALLBACK;
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
break;
|
|
}
|
|
}
|
|
else if (HAL_SPDIFRX_STATE_RESET == hspdif->State)
|
|
{
|
|
switch (CallbackID)
|
|
{
|
|
case HAL_SPDIFRX_MSPINIT_CB_ID :
|
|
hspdif->MspInitCallback = HAL_SPDIFRX_MspInit; /* Legacy weak MspInit */
|
|
break;
|
|
|
|
case HAL_SPDIFRX_MSPDEINIT_CB_ID :
|
|
hspdif->MspDeInitCallback = HAL_SPDIFRX_MspDeInit; /* Legacy weak MspInit */
|
|
break;
|
|
|
|
default :
|
|
/* Update the error code */
|
|
hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_INVALID_CALLBACK;
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
break;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Update the error code */
|
|
hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_INVALID_CALLBACK;
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
}
|
|
|
|
/* Release Lock */
|
|
__HAL_UNLOCK(hspdif);
|
|
return status;
|
|
}
|
|
|
|
#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */
|
|
|
|
/**
|
|
* @brief Set the SPDIFRX data format according to the specified parameters in the SPDIFRX_InitTypeDef.
|
|
* @param hspdif SPDIFRX handle
|
|
* @param sDataFormat SPDIFRX data format
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_SPDIFRX_SetDataFormat(SPDIFRX_HandleTypeDef *hspdif, SPDIFRX_SetDataFormatTypeDef sDataFormat)
|
|
{
|
|
uint32_t tmpreg;
|
|
|
|
/* Check the SPDIFRX handle allocation */
|
|
if (hspdif == NULL)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Check the SPDIFRX parameters */
|
|
assert_param(IS_STEREO_MODE(sDataFormat.StereoMode));
|
|
assert_param(IS_SPDIFRX_DATA_FORMAT(sDataFormat.DataFormat));
|
|
assert_param(IS_PREAMBLE_TYPE_MASK(sDataFormat.PreambleTypeMask));
|
|
assert_param(IS_CHANNEL_STATUS_MASK(sDataFormat.ChannelStatusMask));
|
|
assert_param(IS_VALIDITY_MASK(sDataFormat.ValidityBitMask));
|
|
assert_param(IS_PARITY_ERROR_MASK(sDataFormat.ParityErrorMask));
|
|
|
|
/* Reset the old SPDIFRX CR configuration */
|
|
tmpreg = hspdif->Instance->CR;
|
|
|
|
if (((tmpreg & SPDIFRX_STATE_RCV) == SPDIFRX_STATE_RCV) &&
|
|
(((tmpreg & SPDIFRX_CR_DRFMT) != sDataFormat.DataFormat) ||
|
|
((tmpreg & SPDIFRX_CR_RXSTEO) != sDataFormat.StereoMode)))
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
tmpreg &= ~(SPDIFRX_CR_RXSTEO | SPDIFRX_CR_DRFMT | SPDIFRX_CR_PMSK |
|
|
SPDIFRX_CR_VMSK | SPDIFRX_CR_CUMSK | SPDIFRX_CR_PTMSK);
|
|
|
|
/* Configure the new data format */
|
|
tmpreg |= (sDataFormat.StereoMode |
|
|
sDataFormat.DataFormat |
|
|
sDataFormat.PreambleTypeMask |
|
|
sDataFormat.ChannelStatusMask |
|
|
sDataFormat.ValidityBitMask |
|
|
sDataFormat.ParityErrorMask);
|
|
|
|
hspdif->Instance->CR = tmpreg;
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SPDIFRX_Exported_Functions_Group2 IO operation functions
|
|
* @brief Data transfers functions
|
|
*
|
|
@verbatim
|
|
===============================================================================
|
|
##### IO operation functions #####
|
|
===============================================================================
|
|
[..]
|
|
This subsection provides a set of functions allowing to manage the SPDIFRX data
|
|
transfers.
|
|
|
|
(#) There is two mode of transfer:
|
|
(++) Blocking mode : The communication is performed in the polling mode.
|
|
The status of all data processing is returned by the same function
|
|
after finishing transfer.
|
|
(++) No-Blocking mode : The communication is performed using Interrupts
|
|
or DMA. These functions return the status of the transfer start-up.
|
|
The end of the data processing will be indicated through the
|
|
dedicated SPDIFRX IRQ when using Interrupt mode or the DMA IRQ when
|
|
using DMA mode.
|
|
|
|
(#) Blocking mode functions are :
|
|
(++) HAL_SPDIFRX_ReceiveDataFlow()
|
|
(++) HAL_SPDIFRX_ReceiveCtrlFlow()
|
|
(+@) Do not use blocking mode to receive both control and data flow at the same time.
|
|
|
|
(#) No-Blocking mode functions with Interrupt are :
|
|
(++) HAL_SPDIFRX_ReceiveCtrlFlow_IT()
|
|
(++) HAL_SPDIFRX_ReceiveDataFlow_IT()
|
|
|
|
(#) No-Blocking mode functions with DMA are :
|
|
(++) HAL_SPDIFRX_ReceiveCtrlFlow_DMA()
|
|
(++) HAL_SPDIFRX_ReceiveDataFlow_DMA()
|
|
|
|
(#) A set of Transfer Complete Callbacks are provided in No_Blocking mode:
|
|
(++) HAL_SPDIFRX_RxCpltCallback()
|
|
(++) HAL_SPDIFRX_CxCpltCallback()
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Receives an amount of data (Data Flow) in blocking mode.
|
|
* @param hspdif pointer to SPDIFRX_HandleTypeDef structure that contains
|
|
* the configuration information for SPDIFRX module.
|
|
* @param pData Pointer to data buffer
|
|
* @param Size Amount of data to be received
|
|
* @param Timeout Timeout duration
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size,
|
|
uint32_t Timeout)
|
|
{
|
|
uint32_t tickstart;
|
|
uint16_t sizeCounter = Size;
|
|
uint32_t *pTmpBuf = pData;
|
|
|
|
if ((pData == NULL) || (Size == 0U))
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
if (hspdif->State == HAL_SPDIFRX_STATE_READY)
|
|
{
|
|
/* Process Locked */
|
|
__HAL_LOCK(hspdif);
|
|
|
|
hspdif->State = HAL_SPDIFRX_STATE_BUSY;
|
|
|
|
/* Start synchronisation */
|
|
__HAL_SPDIFRX_SYNC(hspdif);
|
|
|
|
/* Get tick */
|
|
tickstart = HAL_GetTick();
|
|
|
|
/* Wait until SYNCD flag is set */
|
|
if (SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_SYNCD, RESET, Timeout, tickstart) != HAL_OK)
|
|
{
|
|
return HAL_TIMEOUT;
|
|
}
|
|
|
|
/* Start reception */
|
|
__HAL_SPDIFRX_RCV(hspdif);
|
|
|
|
/* Receive data flow */
|
|
while (sizeCounter > 0U)
|
|
{
|
|
/* Get tick */
|
|
tickstart = HAL_GetTick();
|
|
|
|
/* Wait until RXNE flag is set */
|
|
if (SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_RXNE, RESET, Timeout, tickstart) != HAL_OK)
|
|
{
|
|
return HAL_TIMEOUT;
|
|
}
|
|
|
|
(*pTmpBuf) = hspdif->Instance->DR;
|
|
pTmpBuf++;
|
|
sizeCounter--;
|
|
}
|
|
|
|
/* SPDIFRX ready */
|
|
hspdif->State = HAL_SPDIFRX_STATE_READY;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hspdif);
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Receives an amount of data (Control Flow) in blocking mode.
|
|
* @param hspdif pointer to a SPDIFRX_HandleTypeDef structure that contains
|
|
* the configuration information for SPDIFRX module.
|
|
* @param pData Pointer to data buffer
|
|
* @param Size Amount of data to be received
|
|
* @param Timeout Timeout duration
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_SPDIFRX_ReceiveCtrlFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size,
|
|
uint32_t Timeout)
|
|
{
|
|
uint32_t tickstart;
|
|
uint16_t sizeCounter = Size;
|
|
uint32_t *pTmpBuf = pData;
|
|
|
|
if ((pData == NULL) || (Size == 0U))
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
if (hspdif->State == HAL_SPDIFRX_STATE_READY)
|
|
{
|
|
/* Process Locked */
|
|
__HAL_LOCK(hspdif);
|
|
|
|
hspdif->State = HAL_SPDIFRX_STATE_BUSY;
|
|
|
|
/* Start synchronization */
|
|
__HAL_SPDIFRX_SYNC(hspdif);
|
|
|
|
/* Get tick */
|
|
tickstart = HAL_GetTick();
|
|
|
|
/* Wait until SYNCD flag is set */
|
|
if (SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_SYNCD, RESET, Timeout, tickstart) != HAL_OK)
|
|
{
|
|
return HAL_TIMEOUT;
|
|
}
|
|
|
|
/* Start reception */
|
|
__HAL_SPDIFRX_RCV(hspdif);
|
|
|
|
/* Receive control flow */
|
|
while (sizeCounter > 0U)
|
|
{
|
|
/* Get tick */
|
|
tickstart = HAL_GetTick();
|
|
|
|
/* Wait until CSRNE flag is set */
|
|
if (SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_CSRNE, RESET, Timeout, tickstart) != HAL_OK)
|
|
{
|
|
return HAL_TIMEOUT;
|
|
}
|
|
|
|
(*pTmpBuf) = hspdif->Instance->CSR;
|
|
pTmpBuf++;
|
|
sizeCounter--;
|
|
}
|
|
|
|
/* SPDIFRX ready */
|
|
hspdif->State = HAL_SPDIFRX_STATE_READY;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hspdif);
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Receive an amount of data (Data Flow) in non-blocking mode with Interrupt
|
|
* @param hspdif SPDIFRX handle
|
|
* @param pData a 32-bit pointer to the Receive data buffer.
|
|
* @param Size number of data sample to be received .
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size)
|
|
{
|
|
uint32_t count = SPDIFRX_TIMEOUT_VALUE * (SystemCoreClock / 24U / 1000U);
|
|
|
|
const HAL_SPDIFRX_StateTypeDef tempState = hspdif->State;
|
|
|
|
if ((tempState == HAL_SPDIFRX_STATE_READY) || (tempState == HAL_SPDIFRX_STATE_BUSY_CX))
|
|
{
|
|
if ((pData == NULL) || (Size == 0U))
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Process Locked */
|
|
__HAL_LOCK(hspdif);
|
|
|
|
hspdif->pRxBuffPtr = pData;
|
|
hspdif->RxXferSize = Size;
|
|
hspdif->RxXferCount = Size;
|
|
|
|
hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
|
|
|
|
/* Check if a receive process is ongoing or not */
|
|
hspdif->State = HAL_SPDIFRX_STATE_BUSY_RX;
|
|
|
|
/* Enable the SPDIFRX PE Error Interrupt */
|
|
__HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
|
|
|
|
/* Enable the SPDIFRX OVR Error Interrupt */
|
|
__HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
|
|
|
|
/* Enable the SPDIFRX RXNE interrupt */
|
|
__HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_RXNE);
|
|
|
|
if ((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_RCV)
|
|
{
|
|
/* Start synchronization */
|
|
__HAL_SPDIFRX_SYNC(hspdif);
|
|
|
|
/* Wait until SYNCD flag is set */
|
|
do
|
|
{
|
|
if (count == 0U)
|
|
{
|
|
/* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
|
|
__HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE);
|
|
__HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
|
|
__HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
|
|
__HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
|
|
__HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE);
|
|
__HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE);
|
|
__HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE);
|
|
|
|
hspdif->State = HAL_SPDIFRX_STATE_READY;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hspdif);
|
|
|
|
return HAL_TIMEOUT;
|
|
}
|
|
count--;
|
|
} while (__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_SYNCD) == RESET);
|
|
|
|
/* Start reception */
|
|
__HAL_SPDIFRX_RCV(hspdif);
|
|
}
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hspdif);
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Receive an amount of data (Control Flow) with Interrupt
|
|
* @param hspdif SPDIFRX handle
|
|
* @param pData a 32-bit pointer to the Receive data buffer.
|
|
* @param Size number of data sample (Control Flow) to be received
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_SPDIFRX_ReceiveCtrlFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size)
|
|
{
|
|
uint32_t count = SPDIFRX_TIMEOUT_VALUE * (SystemCoreClock / 24U / 1000U);
|
|
|
|
const HAL_SPDIFRX_StateTypeDef tempState = hspdif->State;
|
|
|
|
if ((tempState == HAL_SPDIFRX_STATE_READY) || (tempState == HAL_SPDIFRX_STATE_BUSY_RX))
|
|
{
|
|
if ((pData == NULL) || (Size == 0U))
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Process Locked */
|
|
__HAL_LOCK(hspdif);
|
|
|
|
hspdif->pCsBuffPtr = pData;
|
|
hspdif->CsXferSize = Size;
|
|
hspdif->CsXferCount = Size;
|
|
|
|
hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
|
|
|
|
/* Check if a receive process is ongoing or not */
|
|
hspdif->State = HAL_SPDIFRX_STATE_BUSY_CX;
|
|
|
|
/* Enable the SPDIFRX PE Error Interrupt */
|
|
__HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
|
|
|
|
/* Enable the SPDIFRX OVR Error Interrupt */
|
|
__HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
|
|
|
|
/* Enable the SPDIFRX CSRNE interrupt */
|
|
__HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
|
|
|
|
if ((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_RCV)
|
|
{
|
|
/* Start synchronization */
|
|
__HAL_SPDIFRX_SYNC(hspdif);
|
|
|
|
/* Wait until SYNCD flag is set */
|
|
do
|
|
{
|
|
if (count == 0U)
|
|
{
|
|
/* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
|
|
__HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE);
|
|
__HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
|
|
__HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
|
|
__HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
|
|
__HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE);
|
|
__HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE);
|
|
__HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE);
|
|
|
|
hspdif->State = HAL_SPDIFRX_STATE_READY;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hspdif);
|
|
|
|
return HAL_TIMEOUT;
|
|
}
|
|
count--;
|
|
} while (__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_SYNCD) == RESET);
|
|
|
|
/* Start reception */
|
|
__HAL_SPDIFRX_RCV(hspdif);
|
|
}
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hspdif);
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Receive an amount of data (Data Flow) mode with DMA
|
|
* @param hspdif SPDIFRX handle
|
|
* @param pData a 32-bit pointer to the Receive data buffer.
|
|
* @param Size number of data sample to be received
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size)
|
|
{
|
|
uint32_t count = SPDIFRX_TIMEOUT_VALUE * (SystemCoreClock / 24U / 1000U);
|
|
|
|
const HAL_SPDIFRX_StateTypeDef tempState = hspdif->State;
|
|
|
|
if ((pData == NULL) || (Size == 0U))
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
if ((tempState == HAL_SPDIFRX_STATE_READY) || (tempState == HAL_SPDIFRX_STATE_BUSY_CX))
|
|
{
|
|
/* Process Locked */
|
|
__HAL_LOCK(hspdif);
|
|
|
|
hspdif->pRxBuffPtr = pData;
|
|
hspdif->RxXferSize = Size;
|
|
hspdif->RxXferCount = Size;
|
|
|
|
hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
|
|
hspdif->State = HAL_SPDIFRX_STATE_BUSY_RX;
|
|
|
|
/* Set the SPDIFRX Rx DMA Half transfer complete callback */
|
|
hspdif->hdmaDrRx->XferHalfCpltCallback = SPDIFRX_DMARxHalfCplt;
|
|
|
|
/* Set the SPDIFRX Rx DMA transfer complete callback */
|
|
hspdif->hdmaDrRx->XferCpltCallback = SPDIFRX_DMARxCplt;
|
|
|
|
/* Set the DMA error callback */
|
|
hspdif->hdmaDrRx->XferErrorCallback = SPDIFRX_DMAError;
|
|
|
|
/* Enable the DMA request */
|
|
if (HAL_DMA_Start_IT(hspdif->hdmaDrRx, (uint32_t)&hspdif->Instance->DR, (uint32_t)hspdif->pRxBuffPtr, Size) != HAL_OK)
|
|
{
|
|
/* Set SPDIFRX error */
|
|
hspdif->ErrorCode = HAL_SPDIFRX_ERROR_DMA;
|
|
|
|
/* Set SPDIFRX state */
|
|
hspdif->State = HAL_SPDIFRX_STATE_ERROR;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hspdif);
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Enable RXDMAEN bit in SPDIFRX CR register for data flow reception*/
|
|
hspdif->Instance->CR |= SPDIFRX_CR_RXDMAEN;
|
|
|
|
if ((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_RCV)
|
|
{
|
|
/* Start synchronization */
|
|
__HAL_SPDIFRX_SYNC(hspdif);
|
|
|
|
/* Wait until SYNCD flag is set */
|
|
do
|
|
{
|
|
if (count == 0U)
|
|
{
|
|
/* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
|
|
__HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE);
|
|
__HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
|
|
__HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
|
|
__HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
|
|
__HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE);
|
|
__HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE);
|
|
__HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE);
|
|
|
|
hspdif->State = HAL_SPDIFRX_STATE_READY;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hspdif);
|
|
|
|
return HAL_TIMEOUT;
|
|
}
|
|
count--;
|
|
} while (__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_SYNCD) == RESET);
|
|
|
|
/* Start reception */
|
|
__HAL_SPDIFRX_RCV(hspdif);
|
|
}
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hspdif);
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Receive an amount of data (Control Flow) with DMA
|
|
* @param hspdif SPDIFRX handle
|
|
* @param pData a 32-bit pointer to the Receive data buffer.
|
|
* @param Size number of data (Control Flow) sample to be received
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_SPDIFRX_ReceiveCtrlFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size)
|
|
{
|
|
uint32_t count = SPDIFRX_TIMEOUT_VALUE * (SystemCoreClock / 24U / 1000U);
|
|
|
|
const HAL_SPDIFRX_StateTypeDef tempState = hspdif->State;
|
|
|
|
if ((pData == NULL) || (Size == 0U))
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
if ((tempState == HAL_SPDIFRX_STATE_READY) || (tempState == HAL_SPDIFRX_STATE_BUSY_RX))
|
|
{
|
|
hspdif->pCsBuffPtr = pData;
|
|
hspdif->CsXferSize = Size;
|
|
hspdif->CsXferCount = Size;
|
|
|
|
/* Process Locked */
|
|
__HAL_LOCK(hspdif);
|
|
|
|
hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
|
|
hspdif->State = HAL_SPDIFRX_STATE_BUSY_CX;
|
|
|
|
/* Set the SPDIFRX Rx DMA Half transfer complete callback */
|
|
hspdif->hdmaCsRx->XferHalfCpltCallback = SPDIFRX_DMACxHalfCplt;
|
|
|
|
/* Set the SPDIFRX Rx DMA transfer complete callback */
|
|
hspdif->hdmaCsRx->XferCpltCallback = SPDIFRX_DMACxCplt;
|
|
|
|
/* Set the DMA error callback */
|
|
hspdif->hdmaCsRx->XferErrorCallback = SPDIFRX_DMAError;
|
|
|
|
/* Enable the DMA request */
|
|
if (HAL_DMA_Start_IT(hspdif->hdmaCsRx, (uint32_t)&hspdif->Instance->CSR, (uint32_t)hspdif->pCsBuffPtr, Size) != HAL_OK)
|
|
{
|
|
/* Set SPDIFRX error */
|
|
hspdif->ErrorCode = HAL_SPDIFRX_ERROR_DMA;
|
|
|
|
/* Set SPDIFRX state */
|
|
hspdif->State = HAL_SPDIFRX_STATE_ERROR;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hspdif);
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Enable CBDMAEN bit in SPDIFRX CR register for control flow reception*/
|
|
hspdif->Instance->CR |= SPDIFRX_CR_CBDMAEN;
|
|
|
|
if ((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_RCV)
|
|
{
|
|
/* Start synchronization */
|
|
__HAL_SPDIFRX_SYNC(hspdif);
|
|
|
|
/* Wait until SYNCD flag is set */
|
|
do
|
|
{
|
|
if (count == 0U)
|
|
{
|
|
/* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
|
|
__HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE);
|
|
__HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
|
|
__HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
|
|
__HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
|
|
__HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE);
|
|
__HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE);
|
|
__HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE);
|
|
|
|
hspdif->State = HAL_SPDIFRX_STATE_READY;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hspdif);
|
|
|
|
return HAL_TIMEOUT;
|
|
}
|
|
count--;
|
|
} while (__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_SYNCD) == RESET);
|
|
|
|
/* Start reception */
|
|
__HAL_SPDIFRX_RCV(hspdif);
|
|
}
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hspdif);
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief stop the audio stream receive from the Media.
|
|
* @param hspdif SPDIFRX handle
|
|
* @retval None
|
|
*/
|
|
HAL_StatusTypeDef HAL_SPDIFRX_DMAStop(SPDIFRX_HandleTypeDef *hspdif)
|
|
{
|
|
/* Process Locked */
|
|
__HAL_LOCK(hspdif);
|
|
|
|
/* Disable the SPDIFRX DMA requests */
|
|
hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_RXDMAEN);
|
|
hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_CBDMAEN);
|
|
|
|
/* Disable the SPDIFRX DMA channel */
|
|
__HAL_DMA_DISABLE(hspdif->hdmaDrRx);
|
|
__HAL_DMA_DISABLE(hspdif->hdmaCsRx);
|
|
|
|
/* Disable SPDIFRX peripheral */
|
|
__HAL_SPDIFRX_IDLE(hspdif);
|
|
|
|
hspdif->State = HAL_SPDIFRX_STATE_READY;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hspdif);
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief This function handles SPDIFRX interrupt request.
|
|
* @param hspdif SPDIFRX handle
|
|
* @retval HAL status
|
|
*/
|
|
void HAL_SPDIFRX_IRQHandler(SPDIFRX_HandleTypeDef *hspdif)
|
|
{
|
|
uint32_t itFlag = hspdif->Instance->SR;
|
|
uint32_t itSource = hspdif->Instance->IMR;
|
|
|
|
/* SPDIFRX in mode Data Flow Reception */
|
|
if (((itFlag & SPDIFRX_FLAG_RXNE) == SPDIFRX_FLAG_RXNE) && ((itSource & SPDIFRX_IT_RXNE) == SPDIFRX_IT_RXNE))
|
|
{
|
|
__HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_IT_RXNE);
|
|
SPDIFRX_ReceiveDataFlow_IT(hspdif);
|
|
}
|
|
|
|
/* SPDIFRX in mode Control Flow Reception */
|
|
if (((itFlag & SPDIFRX_FLAG_CSRNE) == SPDIFRX_FLAG_CSRNE) && ((itSource & SPDIFRX_IT_CSRNE) == SPDIFRX_IT_CSRNE))
|
|
{
|
|
__HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_IT_CSRNE);
|
|
SPDIFRX_ReceiveControlFlow_IT(hspdif);
|
|
}
|
|
|
|
/* SPDIFRX Overrun error interrupt occurred */
|
|
if (((itFlag & SPDIFRX_FLAG_OVR) == SPDIFRX_FLAG_OVR) && ((itSource & SPDIFRX_IT_OVRIE) == SPDIFRX_IT_OVRIE))
|
|
{
|
|
__HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_IT_OVRIE);
|
|
|
|
/* Change the SPDIFRX error code */
|
|
hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_OVR;
|
|
|
|
/* the transfer is not stopped */
|
|
HAL_SPDIFRX_ErrorCallback(hspdif);
|
|
}
|
|
|
|
/* SPDIFRX Parity error interrupt occurred */
|
|
if (((itFlag & SPDIFRX_FLAG_PERR) == SPDIFRX_FLAG_PERR) && ((itSource & SPDIFRX_IT_PERRIE) == SPDIFRX_IT_PERRIE))
|
|
{
|
|
__HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_IT_PERRIE);
|
|
|
|
/* Change the SPDIFRX error code */
|
|
hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_PE;
|
|
|
|
/* the transfer is not stopped */
|
|
HAL_SPDIFRX_ErrorCallback(hspdif);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Rx Transfer (Data flow) half completed callbacks
|
|
* @param hspdif SPDIFRX handle
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_SPDIFRX_RxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hspdif);
|
|
|
|
/* NOTE : This function Should not be modified, when the callback is needed,
|
|
the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief Rx Transfer (Data flow) completed callbacks
|
|
* @param hspdif SPDIFRX handle
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_SPDIFRX_RxCpltCallback(SPDIFRX_HandleTypeDef *hspdif)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hspdif);
|
|
|
|
/* NOTE : This function Should not be modified, when the callback is needed,
|
|
the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief Rx (Control flow) Transfer half completed callbacks
|
|
* @param hspdif SPDIFRX handle
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_SPDIFRX_CxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hspdif);
|
|
|
|
/* NOTE : This function Should not be modified, when the callback is needed,
|
|
the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief Rx Transfer (Control flow) completed callbacks
|
|
* @param hspdif SPDIFRX handle
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_SPDIFRX_CxCpltCallback(SPDIFRX_HandleTypeDef *hspdif)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hspdif);
|
|
|
|
/* NOTE : This function Should not be modified, when the callback is needed,
|
|
the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief SPDIFRX error callbacks
|
|
* @param hspdif SPDIFRX handle
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_SPDIFRX_ErrorCallback(SPDIFRX_HandleTypeDef *hspdif)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hspdif);
|
|
|
|
/* NOTE : This function Should not be modified, when the callback is needed,
|
|
the HAL_SPDIFRX_ErrorCallback could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SPDIFRX_Exported_Functions_Group3 Peripheral State and Errors functions
|
|
* @brief Peripheral State functions
|
|
*
|
|
@verbatim
|
|
===============================================================================
|
|
##### Peripheral State and Errors functions #####
|
|
===============================================================================
|
|
[..]
|
|
This subsection permit to get in run-time the status of the peripheral
|
|
and the data flow.
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Return the SPDIFRX state
|
|
* @param hspdif SPDIFRX handle
|
|
* @retval HAL state
|
|
*/
|
|
HAL_SPDIFRX_StateTypeDef HAL_SPDIFRX_GetState(SPDIFRX_HandleTypeDef const *const hspdif)
|
|
{
|
|
return hspdif->State;
|
|
}
|
|
|
|
/**
|
|
* @brief Return the SPDIFRX error code
|
|
* @param hspdif SPDIFRX handle
|
|
* @retval SPDIFRX Error Code
|
|
*/
|
|
uint32_t HAL_SPDIFRX_GetError(SPDIFRX_HandleTypeDef const *const hspdif)
|
|
{
|
|
return hspdif->ErrorCode;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @brief DMA SPDIFRX receive process (Data flow) complete callback
|
|
* @param hdma DMA handle
|
|
* @retval None
|
|
*/
|
|
static void SPDIFRX_DMARxCplt(DMA_HandleTypeDef *hdma)
|
|
{
|
|
SPDIFRX_HandleTypeDef *hspdif = (SPDIFRX_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
|
|
|
|
/* Disable Rx DMA Request */
|
|
if (hdma->Init.Mode != DMA_CIRCULAR)
|
|
{
|
|
hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_RXDMAEN);
|
|
hspdif->RxXferCount = 0;
|
|
hspdif->State = HAL_SPDIFRX_STATE_READY;
|
|
}
|
|
#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1)
|
|
hspdif->RxCpltCallback(hspdif);
|
|
#else
|
|
HAL_SPDIFRX_RxCpltCallback(hspdif);
|
|
#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */
|
|
}
|
|
|
|
/**
|
|
* @brief DMA SPDIFRX receive process (Data flow) half complete callback
|
|
* @param hdma DMA handle
|
|
* @retval None
|
|
*/
|
|
static void SPDIFRX_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
|
|
{
|
|
SPDIFRX_HandleTypeDef *hspdif = (SPDIFRX_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
|
|
|
|
#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1)
|
|
hspdif->RxHalfCpltCallback(hspdif);
|
|
#else
|
|
HAL_SPDIFRX_RxHalfCpltCallback(hspdif);
|
|
#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief DMA SPDIFRX receive process (Control flow) complete callback
|
|
* @param hdma DMA handle
|
|
* @retval None
|
|
*/
|
|
static void SPDIFRX_DMACxCplt(DMA_HandleTypeDef *hdma)
|
|
{
|
|
SPDIFRX_HandleTypeDef *hspdif = (SPDIFRX_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
|
|
|
|
/* Disable Cb DMA Request */
|
|
hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_CBDMAEN);
|
|
hspdif->CsXferCount = 0;
|
|
|
|
hspdif->State = HAL_SPDIFRX_STATE_READY;
|
|
#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1)
|
|
hspdif->CxCpltCallback(hspdif);
|
|
#else
|
|
HAL_SPDIFRX_CxCpltCallback(hspdif);
|
|
#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */
|
|
}
|
|
|
|
/**
|
|
* @brief DMA SPDIFRX receive process (Control flow) half complete callback
|
|
* @param hdma DMA handle
|
|
* @retval None
|
|
*/
|
|
static void SPDIFRX_DMACxHalfCplt(DMA_HandleTypeDef *hdma)
|
|
{
|
|
SPDIFRX_HandleTypeDef *hspdif = (SPDIFRX_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
|
|
|
|
#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1)
|
|
hspdif->CxHalfCpltCallback(hspdif);
|
|
#else
|
|
HAL_SPDIFRX_CxHalfCpltCallback(hspdif);
|
|
#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */
|
|
}
|
|
|
|
/**
|
|
* @brief DMA SPDIFRX communication error callback
|
|
* @param hdma DMA handle
|
|
* @retval None
|
|
*/
|
|
static void SPDIFRX_DMAError(DMA_HandleTypeDef *hdma)
|
|
{
|
|
SPDIFRX_HandleTypeDef *hspdif = (SPDIFRX_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
|
|
|
|
/* Disable Rx and Cb DMA Request */
|
|
hspdif->Instance->CR &= (uint16_t)(~(SPDIFRX_CR_RXDMAEN | SPDIFRX_CR_CBDMAEN));
|
|
hspdif->RxXferCount = 0;
|
|
|
|
hspdif->State = HAL_SPDIFRX_STATE_READY;
|
|
|
|
/* Set the error code and execute error callback*/
|
|
hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_DMA;
|
|
|
|
#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1)
|
|
/* The transfer is not stopped */
|
|
hspdif->ErrorCallback(hspdif);
|
|
#else
|
|
/* The transfer is not stopped */
|
|
HAL_SPDIFRX_ErrorCallback(hspdif);
|
|
#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */
|
|
}
|
|
|
|
/**
|
|
* @brief Receive an amount of data (Data Flow) with Interrupt
|
|
* @param hspdif SPDIFRX handle
|
|
* @retval None
|
|
*/
|
|
static void SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif)
|
|
{
|
|
/* Receive data */
|
|
(*hspdif->pRxBuffPtr) = hspdif->Instance->DR;
|
|
hspdif->pRxBuffPtr++;
|
|
hspdif->RxXferCount--;
|
|
|
|
if (hspdif->RxXferCount == 0U)
|
|
{
|
|
/* Disable RXNE/PE and OVR interrupts */
|
|
__HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE | SPDIFRX_IT_PERRIE | SPDIFRX_IT_RXNE);
|
|
|
|
hspdif->State = HAL_SPDIFRX_STATE_READY;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hspdif);
|
|
|
|
#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1)
|
|
hspdif->RxCpltCallback(hspdif);
|
|
#else
|
|
HAL_SPDIFRX_RxCpltCallback(hspdif);
|
|
#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Receive an amount of data (Control Flow) with Interrupt
|
|
* @param hspdif SPDIFRX handle
|
|
* @retval None
|
|
*/
|
|
static void SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif)
|
|
{
|
|
/* Receive data */
|
|
(*hspdif->pCsBuffPtr) = hspdif->Instance->CSR;
|
|
hspdif->pCsBuffPtr++;
|
|
hspdif->CsXferCount--;
|
|
|
|
if (hspdif->CsXferCount == 0U)
|
|
{
|
|
/* Disable CSRNE interrupt */
|
|
__HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
|
|
|
|
hspdif->State = HAL_SPDIFRX_STATE_READY;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hspdif);
|
|
|
|
#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1)
|
|
hspdif->CxCpltCallback(hspdif);
|
|
#else
|
|
HAL_SPDIFRX_CxCpltCallback(hspdif);
|
|
#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief This function handles SPDIFRX Communication Timeout.
|
|
* @param hspdif SPDIFRX handle
|
|
* @param Flag Flag checked
|
|
* @param Status Value of the flag expected
|
|
* @param Timeout Duration of the timeout
|
|
* @param tickstart Tick start value
|
|
* @retval HAL status
|
|
*/
|
|
static HAL_StatusTypeDef SPDIFRX_WaitOnFlagUntilTimeout(SPDIFRX_HandleTypeDef *hspdif, uint32_t Flag, FlagStatus Status,
|
|
uint32_t Timeout, uint32_t tickstart)
|
|
{
|
|
/* Wait until flag is set */
|
|
while (__HAL_SPDIFRX_GET_FLAG(hspdif, Flag) == Status)
|
|
{
|
|
/* Check for the Timeout */
|
|
if (Timeout != HAL_MAX_DELAY)
|
|
{
|
|
if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U))
|
|
{
|
|
/* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
|
|
__HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE);
|
|
__HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
|
|
__HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
|
|
__HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
|
|
__HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE);
|
|
__HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE);
|
|
__HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE);
|
|
|
|
hspdif->State = HAL_SPDIFRX_STATE_READY;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hspdif);
|
|
|
|
return HAL_TIMEOUT;
|
|
}
|
|
}
|
|
}
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
#endif /* SPDIFRX */
|
|
#endif /* HAL_SPDIFRX_MODULE_ENABLED */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|