434 lines
14 KiB
C
434 lines
14 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32h7xx_hal_opamp_ex.c
|
|
* @author MCD Application Team
|
|
* @brief Extended OPAMP HAL module driver.
|
|
* This file provides firmware functions to manage the following
|
|
* functionalities of the operational amplifier(s) peripheral:
|
|
* + Extended Initialization and de-initialization functions
|
|
* + Extended Peripheral Control functions
|
|
*
|
|
@verbatim
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* Copyright (c) 2017 STMicroelectronics.
|
|
* All rights reserved.
|
|
*
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
|
* in the root directory of this software component.
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32h7xx_hal.h"
|
|
|
|
/** @addtogroup STM32H7xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup OPAMPEx OPAMPEx
|
|
* @brief OPAMP Extended HAL module driver
|
|
* @{
|
|
*/
|
|
|
|
#ifdef HAL_OPAMP_MODULE_ENABLED
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* Private define ------------------------------------------------------------*/
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
/* Exported functions --------------------------------------------------------*/
|
|
|
|
/** @defgroup OPAMPEx_Exported_Functions OPAMP Extended Exported Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup OPAMPEx_Exported_Functions_Group1 Extended Input and Output operation functions
|
|
* @brief Extended operation functions
|
|
*
|
|
@verbatim
|
|
===============================================================================
|
|
##### Extended IO operation functions #####
|
|
===============================================================================
|
|
[..]
|
|
(+) OPAMP Self calibration.
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Run the self calibration of 2 OPAMPs in parallel.
|
|
* @note Trimming values (PMOS & NMOS) are updated and user trimming is
|
|
* enabled is calibration is successful.
|
|
* @note Calibration is performed in the mode specified in OPAMP init
|
|
* structure (mode normal or low power). To perform calibration for
|
|
* both modes, repeat this function twice after OPAMP init structure
|
|
* accordingly updated.
|
|
* @param hopamp1 handle
|
|
* @param hopamp2 handle
|
|
* @retval HAL status
|
|
*/
|
|
|
|
HAL_StatusTypeDef HAL_OPAMPEx_SelfCalibrateAll(OPAMP_HandleTypeDef *hopamp1, OPAMP_HandleTypeDef *hopamp2)
|
|
{
|
|
HAL_StatusTypeDef status = HAL_OK;
|
|
|
|
uint32_t trimmingvaluen1;
|
|
uint32_t trimmingvaluep1;
|
|
uint32_t trimmingvaluen2;
|
|
uint32_t trimmingvaluep2;
|
|
|
|
/* Selection of register of trimming depending on power mode: OTR or HSOTR */
|
|
__IO uint32_t* tmp_opamp1_reg_trimming;
|
|
__IO uint32_t* tmp_opamp2_reg_trimming;
|
|
|
|
uint32_t delta;
|
|
uint32_t opampmode1;
|
|
uint32_t opampmode2;
|
|
|
|
if((hopamp1 == NULL) || (hopamp2 == NULL))
|
|
{
|
|
status = HAL_ERROR;
|
|
}
|
|
/* Check if OPAMP in calibration mode and calibration not yet enable */
|
|
else if(hopamp1->State != HAL_OPAMP_STATE_READY)
|
|
{
|
|
status = HAL_ERROR;
|
|
}
|
|
else if(hopamp2->State != HAL_OPAMP_STATE_READY)
|
|
{
|
|
status = HAL_ERROR;
|
|
}
|
|
else
|
|
{
|
|
/* Check the parameter */
|
|
assert_param(IS_OPAMP_ALL_INSTANCE(hopamp1->Instance));
|
|
assert_param(IS_OPAMP_ALL_INSTANCE(hopamp2->Instance));
|
|
|
|
assert_param(IS_OPAMP_POWERMODE(hopamp1->Init.PowerMode));
|
|
assert_param(IS_OPAMP_POWERMODE(hopamp2->Init.PowerMode));
|
|
|
|
/* Set Calibration mode */
|
|
/* Non-inverting input connected to calibration reference voltage. */
|
|
SET_BIT(hopamp1->Instance->CSR, OPAMP_CSR_FORCEVP);
|
|
SET_BIT(hopamp2->Instance->CSR, OPAMP_CSR_FORCEVP);
|
|
|
|
/* Save OPAMP mode */
|
|
opampmode1 = READ_BIT(hopamp1->Instance->CSR,OPAMP_CSR_VMSEL);
|
|
opampmode2 = READ_BIT(hopamp2->Instance->CSR,OPAMP_CSR_VMSEL);
|
|
|
|
/* Use of standalone mode */
|
|
MODIFY_REG(hopamp1->Instance->CSR, OPAMP_CSR_VMSEL, OPAMP_STANDALONE_MODE);
|
|
MODIFY_REG(hopamp2->Instance->CSR, OPAMP_CSR_VMSEL, OPAMP_STANDALONE_MODE);
|
|
|
|
/* user trimming values are used for offset calibration */
|
|
SET_BIT(hopamp1->Instance->CSR, OPAMP_CSR_USERTRIM);
|
|
SET_BIT(hopamp2->Instance->CSR, OPAMP_CSR_USERTRIM);
|
|
|
|
/* Select trimming settings depending on power mode */
|
|
if (hopamp1->Init.PowerMode == OPAMP_POWERMODE_NORMAL)
|
|
{
|
|
tmp_opamp1_reg_trimming = &OPAMP1->OTR;
|
|
}
|
|
else
|
|
{
|
|
tmp_opamp1_reg_trimming = &OPAMP1->HSOTR;
|
|
}
|
|
|
|
if (hopamp2->Init.PowerMode == OPAMP_POWERMODE_NORMAL)
|
|
{
|
|
tmp_opamp2_reg_trimming = &OPAMP2->OTR;
|
|
}
|
|
else
|
|
{
|
|
tmp_opamp2_reg_trimming = &OPAMP2->HSOTR;
|
|
}
|
|
|
|
/* Enable calibration */
|
|
SET_BIT (hopamp1->Instance->CSR, OPAMP_CSR_CALON);
|
|
SET_BIT (hopamp2->Instance->CSR, OPAMP_CSR_CALON);
|
|
|
|
/* 1st calibration - N */
|
|
/* Select 90U% VREF */
|
|
MODIFY_REG(hopamp1->Instance->CSR, OPAMP_CSR_CALSEL, OPAMP_VREF_90VDDA);
|
|
MODIFY_REG(hopamp2->Instance->CSR, OPAMP_CSR_CALSEL, OPAMP_VREF_90VDDA);
|
|
|
|
/* Enable the selected opamp */
|
|
SET_BIT (hopamp1->Instance->CSR, OPAMP_CSR_OPAMPxEN);
|
|
SET_BIT (hopamp2->Instance->CSR, OPAMP_CSR_OPAMPxEN);
|
|
|
|
/* Init trimming counter */
|
|
/* Medium value */
|
|
trimmingvaluen1 = 16U;
|
|
trimmingvaluen2 = 16U;
|
|
delta = 8U;
|
|
|
|
while (delta != 0U)
|
|
{
|
|
/* Set candidate trimming */
|
|
/* OPAMP_POWERMODE_NORMAL */
|
|
MODIFY_REG(*tmp_opamp1_reg_trimming, OPAMP_OTR_TRIMOFFSETN, trimmingvaluen1);
|
|
MODIFY_REG(*tmp_opamp2_reg_trimming, OPAMP_OTR_TRIMOFFSETN, trimmingvaluen2);
|
|
|
|
/* OFFTRIMmax delay 2 ms as per datasheet (electrical characteristics */
|
|
/* Offset trim time: during calibration, minimum time needed between */
|
|
/* two steps to have 1 mV accuracy */
|
|
HAL_Delay(OPAMP_TRIMMING_DELAY);
|
|
|
|
if (READ_BIT(hopamp1->Instance->CSR, OPAMP_CSR_CALOUT)!= 0U)
|
|
{
|
|
/* OPAMP_CSR_CALOUT is Low try higher trimming */
|
|
trimmingvaluen1 += delta;
|
|
}
|
|
else
|
|
{
|
|
/* OPAMP_CSR_CALOUT is High try lower trimming */
|
|
trimmingvaluen1 -= delta;
|
|
}
|
|
|
|
if (READ_BIT(hopamp2->Instance->CSR, OPAMP_CSR_CALOUT)!= 0U)
|
|
{
|
|
/* OPAMP_CSR_CALOUT is Low try higher trimming */
|
|
trimmingvaluen2 += delta;
|
|
}
|
|
else
|
|
{
|
|
/* OPAMP_CSR_CALOUT is High try lower trimming */
|
|
trimmingvaluen2 -= delta;
|
|
}
|
|
/* Divide range by 2 to continue dichotomy sweep */
|
|
delta >>= 1U;
|
|
}
|
|
|
|
/* Still need to check if right calibration is current value or one step below */
|
|
/* Indeed the first value that causes the OUTCAL bit to change from 0 to 1 */
|
|
/* Set candidate trimming */
|
|
MODIFY_REG(*tmp_opamp1_reg_trimming, OPAMP_OTR_TRIMOFFSETN, trimmingvaluen1);
|
|
MODIFY_REG(*tmp_opamp2_reg_trimming, OPAMP_OTR_TRIMOFFSETN, trimmingvaluen2);
|
|
|
|
/* OFFTRIMmax delay 2 ms as per datasheet (electrical characteristics */
|
|
/* Offset trim time: during calibration, minimum time needed between */
|
|
/* two steps to have 1 mV accuracy */
|
|
HAL_Delay(OPAMP_TRIMMING_DELAY);
|
|
|
|
if ((READ_BIT(hopamp1->Instance->CSR, OPAMP_CSR_CALOUT)) != 0U)
|
|
{
|
|
/* Trimming value is actually one value more */
|
|
trimmingvaluen1++;
|
|
MODIFY_REG(*tmp_opamp1_reg_trimming, OPAMP_OTR_TRIMOFFSETN, trimmingvaluen1);
|
|
}
|
|
|
|
if ((READ_BIT(hopamp2->Instance->CSR, OPAMP_CSR_CALOUT)) != 0U)
|
|
{
|
|
/* Trimming value is actually one value more */
|
|
trimmingvaluen2++;
|
|
MODIFY_REG(*tmp_opamp2_reg_trimming, OPAMP_OTR_TRIMOFFSETN, trimmingvaluen2);
|
|
}
|
|
|
|
/* 2nd calibration - P */
|
|
/* Select 10U% VREF */
|
|
MODIFY_REG(hopamp1->Instance->CSR, OPAMP_CSR_CALSEL, OPAMP_VREF_10VDDA);
|
|
MODIFY_REG(hopamp2->Instance->CSR, OPAMP_CSR_CALSEL, OPAMP_VREF_10VDDA);
|
|
|
|
/* Init trimming counter */
|
|
/* Medium value */
|
|
trimmingvaluep1 = 16U;
|
|
trimmingvaluep2 = 16U;
|
|
delta = 8U;
|
|
|
|
while (delta != 0U)
|
|
{
|
|
/* Set candidate trimming */
|
|
/* OPAMP_POWERMODE_NORMAL */
|
|
MODIFY_REG(*tmp_opamp1_reg_trimming, OPAMP_OTR_TRIMOFFSETP, (trimmingvaluep1<<OPAMP_INPUT_NONINVERTING));
|
|
MODIFY_REG(*tmp_opamp2_reg_trimming, OPAMP_OTR_TRIMOFFSETP, (trimmingvaluep2<<OPAMP_INPUT_NONINVERTING));
|
|
|
|
/* OFFTRIMmax delay 2 ms as per datasheet (electrical characteristics */
|
|
/* Offset trim time: during calibration, minimum time needed between */
|
|
/* two steps to have 1 mV accuracy */
|
|
HAL_Delay(OPAMP_TRIMMING_DELAY);
|
|
|
|
if (READ_BIT(hopamp1->Instance->CSR, OPAMP_CSR_CALOUT)!= 0U)
|
|
{
|
|
/* OPAMP_CSR_CALOUT is Low try higher trimming */
|
|
trimmingvaluep1 += delta;
|
|
}
|
|
else
|
|
{
|
|
/* OPAMP_CSR_CALOUT is HIGH try lower trimming */
|
|
trimmingvaluep1 -= delta;
|
|
}
|
|
|
|
if (READ_BIT(hopamp2->Instance->CSR, OPAMP_CSR_CALOUT)!= 0U)
|
|
{
|
|
/* OPAMP_CSR_CALOUT is Low try higher trimming */
|
|
trimmingvaluep2 += delta;
|
|
}
|
|
else
|
|
{
|
|
/* OPAMP_CSR_CALOUT is High try lower trimming */
|
|
trimmingvaluep2 -= delta;
|
|
}
|
|
/* Divide range by 2 to continue dichotomy sweep */
|
|
delta >>= 1U;
|
|
}
|
|
|
|
/* Still need to check if right calibration is current value or one step below */
|
|
/* Indeed the first value that causes the OUTCAL bit to change from 1 to 0 */
|
|
/* Set candidate trimming */
|
|
MODIFY_REG(*tmp_opamp1_reg_trimming, OPAMP_OTR_TRIMOFFSETP, (trimmingvaluep1<<OPAMP_INPUT_NONINVERTING));
|
|
MODIFY_REG(*tmp_opamp2_reg_trimming, OPAMP_OTR_TRIMOFFSETP, (trimmingvaluep2<<OPAMP_INPUT_NONINVERTING));
|
|
|
|
/* OFFTRIMmax delay 2 ms as per datasheet (electrical characteristics */
|
|
/* Offset trim time: during calibration, minimum time needed between */
|
|
/* two steps to have 1 mV accuracy */
|
|
HAL_Delay(OPAMP_TRIMMING_DELAY);
|
|
|
|
if (READ_BIT(hopamp1->Instance->CSR, OPAMP_CSR_CALOUT)!= 0U)
|
|
{
|
|
/* Trimming value is actually one value more */
|
|
trimmingvaluep1++;
|
|
MODIFY_REG(*tmp_opamp1_reg_trimming, OPAMP_OTR_TRIMOFFSETP, (trimmingvaluep1<<OPAMP_INPUT_NONINVERTING));
|
|
}
|
|
|
|
if (READ_BIT(hopamp2->Instance->CSR, OPAMP_CSR_CALOUT)!= 0U)
|
|
{
|
|
/* Trimming value is actually one value more */
|
|
trimmingvaluep2++;
|
|
MODIFY_REG(*tmp_opamp2_reg_trimming, OPAMP_OTR_TRIMOFFSETP, (trimmingvaluep2<<OPAMP_INPUT_NONINVERTING));
|
|
}
|
|
|
|
/* Disable calibration & set normal mode (operating mode) */
|
|
CLEAR_BIT (hopamp1->Instance->CSR, OPAMP_CSR_CALON);
|
|
CLEAR_BIT (hopamp2->Instance->CSR, OPAMP_CSR_CALON);
|
|
|
|
/* Disable the OPAMPs */
|
|
CLEAR_BIT (hopamp1->Instance->CSR, OPAMP_CSR_OPAMPxEN);
|
|
CLEAR_BIT (hopamp2->Instance->CSR, OPAMP_CSR_OPAMPxEN);
|
|
|
|
/* Self calibration is successful */
|
|
/* Store calibration (user trimming) results in init structure. */
|
|
|
|
/* Set user trimming mode */
|
|
hopamp1->Init.UserTrimming = OPAMP_TRIMMING_USER;
|
|
hopamp2->Init.UserTrimming = OPAMP_TRIMMING_USER;
|
|
|
|
/* Affect calibration parameters depending on mode normal/high speed */
|
|
if (hopamp1->Init.PowerMode != OPAMP_POWERMODE_HIGHSPEED)
|
|
{
|
|
/* Write calibration result N */
|
|
hopamp1->Init.TrimmingValueN = trimmingvaluen1;
|
|
/* Write calibration result P */
|
|
hopamp1->Init.TrimmingValueP = trimmingvaluep1;
|
|
}
|
|
else
|
|
{
|
|
/* Write calibration result N */
|
|
hopamp1->Init.TrimmingValueNHighSpeed = trimmingvaluen1;
|
|
/* Write calibration result P */
|
|
hopamp1->Init.TrimmingValuePHighSpeed = trimmingvaluep1;
|
|
}
|
|
|
|
if (hopamp2->Init.PowerMode != OPAMP_POWERMODE_HIGHSPEED)
|
|
{
|
|
/* Write calibration result N */
|
|
hopamp2->Init.TrimmingValueN = trimmingvaluen2;
|
|
/* Write calibration result P */
|
|
hopamp2->Init.TrimmingValueP = trimmingvaluep2;
|
|
}
|
|
else
|
|
{
|
|
/* Write calibration result N */
|
|
hopamp2->Init.TrimmingValueNHighSpeed = trimmingvaluen2;
|
|
/* Write calibration result P */
|
|
hopamp2->Init.TrimmingValuePHighSpeed = trimmingvaluep2;
|
|
|
|
}
|
|
/* Update OPAMP state */
|
|
hopamp1->State = HAL_OPAMP_STATE_READY;
|
|
hopamp2->State = HAL_OPAMP_STATE_READY;
|
|
|
|
/* Restore OPAMP mode after calibration */
|
|
MODIFY_REG(hopamp1->Instance->CSR, OPAMP_CSR_VMSEL, opampmode1);
|
|
MODIFY_REG(hopamp2->Instance->CSR, OPAMP_CSR_VMSEL, opampmode2);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup OPAMPEx_Exported_Functions_Group2 Peripheral Control functions
|
|
* @brief Peripheral Control functions
|
|
*
|
|
@verbatim
|
|
===============================================================================
|
|
##### Peripheral Control functions #####
|
|
===============================================================================
|
|
[..]
|
|
(+) OPAMP unlock.
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Unlock the selected OPAMP configuration.
|
|
* @note This function must be called only when OPAMP is in state "locked".
|
|
* @param hopamp: OPAMP handle
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_OPAMPEx_Unlock(OPAMP_HandleTypeDef* hopamp)
|
|
{
|
|
HAL_StatusTypeDef status = HAL_OK;
|
|
|
|
/* Check the OPAMP handle allocation */
|
|
/* Check if OPAMP locked */
|
|
if(hopamp == NULL)
|
|
{
|
|
status = HAL_ERROR;
|
|
}
|
|
/* Check the OPAMP handle allocation */
|
|
/* Check if OPAMP locked */
|
|
else if(hopamp->State == HAL_OPAMP_STATE_BUSYLOCKED)
|
|
{
|
|
/* Check the parameter */
|
|
assert_param(IS_OPAMP_ALL_INSTANCE(hopamp->Instance));
|
|
|
|
/* OPAMP state changed to locked */
|
|
hopamp->State = HAL_OPAMP_STATE_BUSY;
|
|
}
|
|
else
|
|
{
|
|
status = HAL_ERROR;
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#endif /* HAL_OPAMP_MODULE_ENABLED */
|
|
|