steering-wheel/Drivers/CMSIS/DSP/Source/BasicMathFunctions/arm_shift_q15.c

202 lines
5.7 KiB
C

/* ----------------------------------------------------------------------
* Project: CMSIS DSP Library
* Title: arm_shift_q15.c
* Description: Shifts the elements of a Q15 vector by a specified number of bits
*
* $Date: 18. March 2019
* $Revision: V1.6.0
*
* Target Processor: Cortex-M cores
* -------------------------------------------------------------------- */
/*
* Copyright (C) 2010-2019 ARM Limited or its affiliates. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "arm_math.h"
/**
@ingroup groupMath
*/
/**
@addtogroup BasicShift
@{
*/
/**
@brief Shifts the elements of a Q15 vector a specified number of bits
@param[in] pSrc points to the input vector
@param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right.
@param[out] pDst points to the output vector
@param[in] blockSize number of samples in each vector
@return none
@par Scaling and Overflow Behavior
The function uses saturating arithmetic.
Results outside of the allowable Q15 range [0x8000 0x7FFF] are saturated.
*/
void arm_shift_q15(
const q15_t * pSrc,
int8_t shiftBits,
q15_t * pDst,
uint32_t blockSize)
{
uint32_t blkCnt; /* Loop counter */
uint8_t sign = (shiftBits & 0x80); /* Sign of shiftBits */
#if defined (ARM_MATH_LOOPUNROLL)
#if defined (ARM_MATH_DSP)
q15_t in1, in2; /* Temporary input variables */
#endif
/* Loop unrolling: Compute 4 outputs at a time */
blkCnt = blockSize >> 2U;
/* If the shift value is positive then do right shift else left shift */
if (sign == 0U)
{
while (blkCnt > 0U)
{
/* C = A << shiftBits */
#if defined (ARM_MATH_DSP)
/* read 2 samples from source */
in1 = *pSrc++;
in2 = *pSrc++;
/* Shift the inputs and then store the results in the destination buffer. */
#ifndef ARM_MATH_BIG_ENDIAN
write_q15x2_ia (&pDst, __PKHBT(__SSAT((in1 << shiftBits), 16),
__SSAT((in2 << shiftBits), 16), 16));
#else
write_q15x2_ia (&pDst, __PKHBT(__SSAT((in2 << shiftBits), 16),
__SSAT((in1 << shiftBits), 16), 16));
#endif /* #ifndef ARM_MATH_BIG_ENDIAN */
/* read 2 samples from source */
in1 = *pSrc++;
in2 = *pSrc++;
#ifndef ARM_MATH_BIG_ENDIAN
write_q15x2_ia (&pDst, __PKHBT(__SSAT((in1 << shiftBits), 16),
__SSAT((in2 << shiftBits), 16), 16));
#else
write_q15x2_ia (&pDst, __PKHBT(__SSAT((in2 << shiftBits), 16),
__SSAT((in1 << shiftBits), 16), 16));
#endif /* #ifndef ARM_MATH_BIG_ENDIAN */
#else
*pDst++ = __SSAT(((q31_t) *pSrc++ << shiftBits), 16);
*pDst++ = __SSAT(((q31_t) *pSrc++ << shiftBits), 16);
*pDst++ = __SSAT(((q31_t) *pSrc++ << shiftBits), 16);
*pDst++ = __SSAT(((q31_t) *pSrc++ << shiftBits), 16);
#endif
/* Decrement loop counter */
blkCnt--;
}
}
else
{
while (blkCnt > 0U)
{
/* C = A >> shiftBits */
#if defined (ARM_MATH_DSP)
/* read 2 samples from source */
in1 = *pSrc++;
in2 = *pSrc++;
/* Shift the inputs and then store the results in the destination buffer. */
#ifndef ARM_MATH_BIG_ENDIAN
write_q15x2_ia (&pDst, __PKHBT((in1 >> -shiftBits),
(in2 >> -shiftBits), 16));
#else
write_q15x2_ia (&pDst, __PKHBT((in2 >> -shiftBits),
(in1 >> -shiftBits), 16));
#endif /* #ifndef ARM_MATH_BIG_ENDIAN */
/* read 2 samples from source */
in1 = *pSrc++;
in2 = *pSrc++;
#ifndef ARM_MATH_BIG_ENDIAN
write_q15x2_ia (&pDst, __PKHBT((in1 >> -shiftBits),
(in2 >> -shiftBits), 16));
#else
write_q15x2_ia (&pDst, __PKHBT((in2 >> -shiftBits),
(in1 >> -shiftBits), 16));
#endif /* #ifndef ARM_MATH_BIG_ENDIAN */
#else
*pDst++ = (*pSrc++ >> -shiftBits);
*pDst++ = (*pSrc++ >> -shiftBits);
*pDst++ = (*pSrc++ >> -shiftBits);
*pDst++ = (*pSrc++ >> -shiftBits);
#endif
/* Decrement loop counter */
blkCnt--;
}
}
/* Loop unrolling: Compute remaining outputs */
blkCnt = blockSize % 0x4U;
#else
/* Initialize blkCnt with number of samples */
blkCnt = blockSize;
#endif /* #if defined (ARM_MATH_LOOPUNROLL) */
/* If the shift value is positive then do right shift else left shift */
if (sign == 0U)
{
while (blkCnt > 0U)
{
/* C = A << shiftBits */
/* Shift input and store result in destination buffer. */
*pDst++ = __SSAT(((q31_t) *pSrc++ << shiftBits), 16);
/* Decrement loop counter */
blkCnt--;
}
}
else
{
while (blkCnt > 0U)
{
/* C = A >> shiftBits */
/* Shift input and store result in destination buffer. */
*pDst++ = (*pSrc++ >> -shiftBits);
/* Decrement loop counter */
blkCnt--;
}
}
}
/**
@} end of BasicShift group
*/