66 lines
1.5 KiB
C++
66 lines
1.5 KiB
C++
// Arduino Due - Displays all traffic found on either canbus port
|
|
// By Thibaut Viard/Wilfredo Molina/Collin Kidder 2013-2014
|
|
|
|
// Required libraries
|
|
#include "variant.h"
|
|
#include <due_can.h>
|
|
|
|
//Leave defined if you use native port, comment if using programming port
|
|
//This sketch could provide a lot of traffic so it might be best to use the
|
|
//native port
|
|
#define Serial SerialUSB
|
|
|
|
void setup()
|
|
{
|
|
|
|
Serial.begin(115200);
|
|
|
|
// Initialize CAN0 and CAN1, Set the proper baud rates here
|
|
Can0.begin(CAN_BPS_250K);
|
|
Can1.begin(CAN_BPS_250K);
|
|
|
|
//By default there are 7 mailboxes for each device that are RX boxes
|
|
//This sets each mailbox to have an open filter that will accept extended
|
|
//or standard frames
|
|
int filter;
|
|
//extended
|
|
for (filter = 0; filter < 3; filter++) {
|
|
Can0.setRXFilter(filter, 0, 0, true);
|
|
Can1.setRXFilter(filter, 0, 0, true);
|
|
}
|
|
//standard
|
|
for (int filter = 3; filter < 7; filter++) {
|
|
Can0.setRXFilter(filter, 0, 0, false);
|
|
Can1.setRXFilter(filter, 0, 0, false);
|
|
}
|
|
|
|
}
|
|
|
|
void printFrame(CAN_FRAME &frame) {
|
|
Serial.print("ID: 0x");
|
|
Serial.print(frame.id, HEX);
|
|
Serial.print(" Len: ");
|
|
Serial.print(frame.length);
|
|
Serial.print(" Data: 0x");
|
|
for (int count = 0; count < frame.length; count++) {
|
|
Serial.print(frame.data.bytes[count], HEX);
|
|
Serial.print(" ");
|
|
}
|
|
Serial.print("\r\n");
|
|
}
|
|
|
|
void loop(){
|
|
CAN_FRAME incoming;
|
|
|
|
if (Can0.available() > 0) {
|
|
Can0.read(incoming);
|
|
printFrame(incoming);
|
|
}
|
|
if (Can1.available() > 0) {
|
|
Can1.read(incoming);
|
|
printFrame(incoming);
|
|
}
|
|
}
|
|
|
|
|