steering-wheel/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_mdios.c

969 lines
29 KiB
C

/**
******************************************************************************
* @file stm32h7xx_hal_mdios.c
* @author MCD Application Team
* @brief MDIOS HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the MDIOS Peripheral.
* + Initialization and de-initialization functions
* + IO operation functions
* + Peripheral Control functions
*
*
******************************************************************************
* @attention
*
* Copyright (c) 2017 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
@verbatim
===============================================================================
##### How to use this driver #####
===============================================================================
[..]
The MDIOS HAL driver can be used as follow:
(#) Declare a MDIOS_HandleTypeDef handle structure.
(#) Initialize the MDIOS low level resources by implementing the HAL_MDIOS_MspInit() API:
(##) Enable the MDIOS interface clock.
(##) MDIOS pins configuration:
(+++) Enable clocks for the MDIOS GPIOs.
(+++) Configure the MDIOS pins as alternate function.
(##) NVIC configuration if you need to use interrupt process:
(+++) Configure the MDIOS interrupt priority.
(+++) Enable the NVIC MDIOS IRQ handle.
(#) Program the Port Address and the Preamble Check in the Init structure.
(#) Initialize the MDIOS registers by calling the HAL_MDIOS_Init() API.
(#) Perform direct slave read/write operations using the following APIs:
(##) Read the value of a DINn register: HAL_MDIOS_ReadReg()
(##) Write a value to a DOUTn register: HAL_MDIOS_WriteReg()
(#) Get the Master read/write operations flags using the following APIs:
(##) Bit map of DOUTn registers read by Master: HAL_MDIOS_GetReadRegAddress()
(##) Bit map of DINn registers written by Master : HAL_MDIOS_GetWrittenRegAddress()
(#) Clear the read/write flags using the following APIs:
(##) Clear read flags of a set of registers: HAL_MDIOS_ClearReadRegAddress()
(##) Clear write flags of a set of registers: HAL_MDIOS_ClearWriteRegAddress()
(#) Enable interrupts on events using HAL_MDIOS_EnableEvents(), when called
the MDIOS will generate an interrupt in the following cases:
(##) a DINn register written by the Master
(##) a DOUTn register read by the Master
(##) an error occur
(@) A callback is executed for each genereted interrupt, so the driver provide the following
HAL_MDIOS_WriteCpltCallback(), HAL_MDIOS_ReadCpltCallback() and HAL_MDIOS_ErrorCallback()
(@) HAL_MDIOS_IRQHandler() must be called from the MDIOS IRQ Handler, to handle the interrupt
and execute the previous callbacks
(#) Reset the MDIOS peripheral and all related resources by calling the HAL_MDIOS_DeInit() API.
(##) HAL_MDIOS_MspDeInit() must be implemented to reset low level resources
(GPIO, Clocks, NVIC configuration ...)
*** Callback registration ***
=============================================
The compilation define USE_HAL_MDIOS_REGISTER_CALLBACKS when set to 1
allows the user to configure dynamically the driver callbacks.
Use Function @ref HAL_MDIOS_RegisterCallback() to register an interrupt callback.
Function @ref HAL_MDIOS_RegisterCallback() allows to register following callbacks:
(+) WriteCpltCallback : Write Complete Callback.
(+) ReadCpltCallback : Read Complete Callback.
(+) ErrorCallback : Error Callback.
(+) WakeUpCallback : Wake UP Callback
(+) MspInitCallback : MspInit Callback.
(+) MspDeInitCallback : MspDeInit Callback.
This function takes as parameters the HAL peripheral handle, the Callback ID
and a pointer to the user callback function.
Use function @ref HAL_MDIOS_UnRegisterCallback() to reset a callback to the default
weak function.
@ref HAL_MDIOS_UnRegisterCallback takes as parameters the HAL peripheral handle,
and the Callback ID.
This function allows to reset following callbacks:
(+) WriteCpltCallback : Write Complete Callback.
(+) ReadCpltCallback : Read Complete Callback.
(+) ErrorCallback : Error Callback.
(+) WakeUpCallback : Wake UP Callback
(+) MspInitCallback : MspInit Callback.
(+) MspDeInitCallback : MspDeInit Callback.
By default, after the HAL_MDIOS_Init and when the state is HAL_MDIOS_STATE_RESET
all callbacks are set to the corresponding weak functions:
examples @ref HAL_MDIOS_WriteCpltCallback(), @ref HAL_MDIOS_ReadCpltCallback().
Exception done for MspInit and MspDeInit functions that are
reset to the legacy weak function in the HAL_MDIOS_Init/ @ref HAL_MDIOS_DeInit only when
these callbacks are null (not registered beforehand).
if not, MspInit or MspDeInit are not null, the HAL_MDIOS_Init/ @ref HAL_MDIOS_DeInit
keep and use the user MspInit/MspDeInit callbacks (registered beforehand)
Callbacks can be registered/unregistered in HAL_MDIOS_STATE_READY state only.
Exception done MspInit/MspDeInit that can be registered/unregistered
in HAL_MDIOS_STATE_READY or HAL_MDIOS_STATE_RESET state,
thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit.
In that case first register the MspInit/MspDeInit user callbacks
using @ref HAL_MDIOS_RegisterCallback() before calling @ref HAL_MDIOS_DeInit
or HAL_MDIOS_Init function.
When The compilation define USE_HAL_MDIOS_REGISTER_CALLBACKS is set to 0 or
not defined, the callback registration feature is not available and all callbacks
are set to the corresponding weak functions.
@endverbatim
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal.h"
/** @addtogroup STM32H7xx_HAL_Driver
* @{
*/
#if defined (MDIOS)
/** @defgroup MDIOS MDIOS
* @brief HAL MDIOS module driver
* @{
*/
#ifdef HAL_MDIOS_MODULE_ENABLED
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/** @defgroup MDIOS_Private_Define MDIOS Private Define
* @{
*/
#define MDIOS_PORT_ADDRESS_SHIFT ((uint32_t)8)
#define MDIOS_ALL_REG_FLAG ((uint32_t)0xFFFFFFFFU)
#define MDIOS_ALL_ERRORS_FLAG ((uint32_t)(MDIOS_SR_PERF | MDIOS_SR_SERF | MDIOS_SR_TERF))
#define MDIOS_DIN_BASE_ADDR (MDIOS_BASE + 0x100U)
#define MDIOS_DOUT_BASE_ADDR (MDIOS_BASE + 0x180U)
/**
* @}
*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
#if (USE_HAL_MDIOS_REGISTER_CALLBACKS == 1)
/** @defgroup MDIOS_Private_Functions MDIOS Private Functions
* @{
*/
static void MDIOS_InitCallbacksToDefault(MDIOS_HandleTypeDef *hmdios);
/**
* @}
*/
#endif /* USE_HAL_MDIOS_REGISTER_CALLBACKS */
/* Private functions ---------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup MDIOS_Exported_Functions MDIOS Exported Functions
* @{
*/
/** @defgroup MDIOS_Exported_Functions_Group1 Initialization/de-initialization functions
* @brief Initialization and Configuration functions
*
@verbatim
===============================================================================
##### Initialization and Configuration functions #####
===============================================================================
[..]
This subsection provides a set of functions allowing to initialize the MDIOS
(+) The following parameters can be configured:
(++) Port Address
(++) Preamble Check
@endverbatim
* @{
*/
/**
* @brief Initializes the MDIOS according to the specified parameters in
* the MDIOS_InitTypeDef and creates the associated handle .
* @param hmdios: pointer to a MDIOS_HandleTypeDef structure that contains
* the configuration information for MDIOS module
* @retval HAL status
*/
HAL_StatusTypeDef HAL_MDIOS_Init(MDIOS_HandleTypeDef *hmdios)
{
uint32_t tmpcr;
/* Check the MDIOS handle allocation */
if(hmdios == NULL)
{
return HAL_ERROR;
}
/* Check the parameters */
assert_param(IS_MDIOS_ALL_INSTANCE(hmdios->Instance));
assert_param(IS_MDIOS_PORTADDRESS(hmdios->Init.PortAddress));
assert_param(IS_MDIOS_PREAMBLECHECK(hmdios->Init.PreambleCheck));
#if (USE_HAL_MDIOS_REGISTER_CALLBACKS == 1)
if(hmdios->State == HAL_MDIOS_STATE_RESET)
{
MDIOS_InitCallbacksToDefault(hmdios);
if(hmdios->MspInitCallback == NULL)
{
hmdios->MspInitCallback = HAL_MDIOS_MspInit;
}
/* Init the low level hardware */
hmdios->MspInitCallback(hmdios);
}
#else
if(hmdios->State == HAL_MDIOS_STATE_RESET)
{
/* Init the low level hardware */
HAL_MDIOS_MspInit(hmdios);
}
#endif /* (USE_HAL_MDIOS_REGISTER_CALLBACKS) */
/* Change the MDIOS state */
hmdios->State = HAL_MDIOS_STATE_BUSY;
/* Get the MDIOS CR value */
tmpcr = hmdios->Instance->CR;
/* Clear PORT_ADDRESS, DPC and EN bits */
tmpcr &= ((uint32_t)~(MDIOS_CR_EN | MDIOS_CR_DPC | MDIOS_CR_PORT_ADDRESS));
/* Set MDIOS control parametrs and enable the peripheral */
tmpcr |= (uint32_t)(((hmdios->Init.PortAddress) << MDIOS_PORT_ADDRESS_SHIFT) |\
(hmdios->Init.PreambleCheck) | \
(MDIOS_CR_EN));
/* Write the MDIOS CR */
hmdios->Instance->CR = tmpcr;
hmdios->ErrorCode = HAL_MDIOS_ERROR_NONE;
/* Change the MDIOS state */
hmdios->State = HAL_MDIOS_STATE_READY;
/* Release Lock */
__HAL_UNLOCK(hmdios);
/* Return function status */
return HAL_OK;
}
/**
* @brief DeInitializes the MDIOS peripheral.
* @param hmdios: MDIOS handle
* @retval HAL status
*/
HAL_StatusTypeDef HAL_MDIOS_DeInit(MDIOS_HandleTypeDef *hmdios)
{
/* Check the MDIOS handle allocation */
if(hmdios == NULL)
{
return HAL_ERROR;
}
/* Check the parameters */
assert_param(IS_MDIOS_ALL_INSTANCE(hmdios->Instance));
/* Change the MDIOS state */
hmdios->State = HAL_MDIOS_STATE_BUSY;
/* Disable the Peripheral */
__HAL_MDIOS_DISABLE(hmdios);
#if (USE_HAL_MDIOS_REGISTER_CALLBACKS == 1)
if(hmdios->MspDeInitCallback == NULL)
{
hmdios->MspDeInitCallback = HAL_MDIOS_MspDeInit;
}
/* DeInit the low level hardware */
hmdios->MspDeInitCallback(hmdios);
#else
/* DeInit the low level hardware */
HAL_MDIOS_MspDeInit(hmdios);
#endif /* (USE_HAL_MDIOS_REGISTER_CALLBACKS) */
/* Change the MDIOS state */
hmdios->State = HAL_MDIOS_STATE_RESET;
/* Release Lock */
__HAL_UNLOCK(hmdios);
/* Return function status */
return HAL_OK;
}
/**
* @brief MDIOS MSP Init
* @param hmdios: mdios handle
* @retval None
*/
__weak void HAL_MDIOS_MspInit(MDIOS_HandleTypeDef *hmdios)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hmdios);
/* NOTE : This function should not be modified, when the callback is needed,
the HAL_MDIOS_MspInit can be implemented in the user file
*/
}
/**
* @brief MDIOS MSP DeInit
* @param hmdios: mdios handle
* @retval None
*/
__weak void HAL_MDIOS_MspDeInit(MDIOS_HandleTypeDef *hmdios)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hmdios);
/* NOTE : This function should not be modified, when the callback is needed,
the HAL_MDIOS_MspDeInit can be implemented in the user file
*/
}
#if (USE_HAL_MDIOS_REGISTER_CALLBACKS == 1)
/**
* @brief Register a User MDIOS Callback
* To be used instead of the weak predefined callback
* @param hmdios mdios handle
* @param CallbackID ID of the callback to be registered
* This parameter can be one of the following values:
* @arg @ref HAL_MDIOS_WRITE_COMPLETE_CB_ID Write Complete Callback ID
* @arg @ref HAL_MDIOS_READ_COMPLETE_CB_ID Read Complete Callback ID
* @arg @ref HAL_MDIOS_ERROR_CB_ID Error Callback ID
* @arg @ref HAL_MDIOS_WAKEUP_CB_ID Wake Up Callback ID
* @arg @ref HAL_MDIOS_MSPINIT_CB_ID MspInit callback ID
* @arg @ref HAL_MDIOS_MSPDEINIT_CB_ID MspDeInit callback ID
* @param pCallback pointer to the Callback function
* @retval status
*/
HAL_StatusTypeDef HAL_MDIOS_RegisterCallback(MDIOS_HandleTypeDef *hmdios, HAL_MDIOS_CallbackIDTypeDef CallbackID, pMDIOS_CallbackTypeDef pCallback)
{
HAL_StatusTypeDef status = HAL_OK;
if(pCallback == NULL)
{
/* Update the error code */
hmdios->ErrorCode |= HAL_MDIOS_ERROR_INVALID_CALLBACK;
return HAL_ERROR;
}
/* Process locked */
__HAL_LOCK(hmdios);
if(hmdios->State == HAL_MDIOS_STATE_READY)
{
switch (CallbackID)
{
case HAL_MDIOS_WRITE_COMPLETE_CB_ID :
hmdios->WriteCpltCallback = pCallback;
break;
case HAL_MDIOS_READ_COMPLETE_CB_ID :
hmdios->ReadCpltCallback = pCallback;
break;
case HAL_MDIOS_ERROR_CB_ID :
hmdios->ErrorCallback = pCallback;
break;
case HAL_MDIOS_WAKEUP_CB_ID :
hmdios->WakeUpCallback = pCallback;
break;
case HAL_MDIOS_MSPINIT_CB_ID :
hmdios->MspInitCallback = pCallback;
break;
case HAL_MDIOS_MSPDEINIT_CB_ID :
hmdios->MspDeInitCallback = pCallback;
break;
default :
/* Update the error code */
hmdios->ErrorCode |= HAL_MDIOS_ERROR_INVALID_CALLBACK;
/* Return error status */
status = HAL_ERROR;
break;
}
}
else if(hmdios->State == HAL_MDIOS_STATE_RESET)
{
switch (CallbackID)
{
case HAL_MDIOS_MSPINIT_CB_ID :
hmdios->MspInitCallback = pCallback;
break;
case HAL_MDIOS_MSPDEINIT_CB_ID :
hmdios->MspDeInitCallback = pCallback;
break;
default :
/* Update the error code */
hmdios->ErrorCode |= HAL_MDIOS_ERROR_INVALID_CALLBACK;
/* Return error status */
status = HAL_ERROR;
break;
}
}
else
{
/* Update the error code */
hmdios->ErrorCode |= HAL_MDIOS_ERROR_INVALID_CALLBACK;
/* Return error status */
status = HAL_ERROR;
}
/* Release Lock */
__HAL_UNLOCK(hmdios);
return status;
}
/**
* @brief Unregister an MDIOS Callback
* MDIOS callback is redirected to the weak predefined callback
* @param hmdios mdios handle
* @param CallbackID ID of the callback to be unregistered
* This parameter can be one of the following values:
* @arg @ref HAL_MDIOS_WRITE_COMPLETE_CB_ID Write Complete Callback ID
* @arg @ref HAL_MDIOS_READ_COMPLETE_CB_ID Read Complete Callback ID
* @arg @ref HAL_MDIOS_ERROR_CB_ID Error Callback ID
* @arg @ref HAL_MDIOS_WAKEUP_CB_ID Wake Up Callback ID
* @arg @ref HAL_MDIOS_MSPINIT_CB_ID MspInit callback ID
* @arg @ref HAL_MDIOS_MSPDEINIT_CB_ID MspDeInit callback ID
* @retval status
*/
HAL_StatusTypeDef HAL_MDIOS_UnRegisterCallback(MDIOS_HandleTypeDef *hmdios, HAL_MDIOS_CallbackIDTypeDef CallbackID)
{
HAL_StatusTypeDef status = HAL_OK;
/* Process locked */
__HAL_LOCK(hmdios);
if(hmdios->State == HAL_MDIOS_STATE_READY)
{
switch (CallbackID)
{
case HAL_MDIOS_WRITE_COMPLETE_CB_ID :
hmdios->WriteCpltCallback = HAL_MDIOS_WriteCpltCallback;
break;
case HAL_MDIOS_READ_COMPLETE_CB_ID :
hmdios->ReadCpltCallback = HAL_MDIOS_ReadCpltCallback;
break;
case HAL_MDIOS_ERROR_CB_ID :
hmdios->ErrorCallback = HAL_MDIOS_ErrorCallback;
break;
case HAL_MDIOS_WAKEUP_CB_ID :
hmdios->WakeUpCallback = HAL_MDIOS_WakeUpCallback;
break;
case HAL_MDIOS_MSPINIT_CB_ID :
hmdios->MspInitCallback = HAL_MDIOS_MspInit;
break;
case HAL_MDIOS_MSPDEINIT_CB_ID :
hmdios->MspDeInitCallback = HAL_MDIOS_MspDeInit;
break;
default :
/* Update the error code */
hmdios->ErrorCode |= HAL_MDIOS_ERROR_INVALID_CALLBACK;
/* Return error status */
status = HAL_ERROR;
break;
}
}
else if(hmdios->State == HAL_MDIOS_STATE_RESET)
{
switch (CallbackID)
{
case HAL_MDIOS_MSPINIT_CB_ID :
hmdios->MspInitCallback = HAL_MDIOS_MspInit;
break;
case HAL_MDIOS_MSPDEINIT_CB_ID :
hmdios->MspDeInitCallback = HAL_MDIOS_MspDeInit;
break;
default :
/* Update the error code */
hmdios->ErrorCode |= HAL_MDIOS_ERROR_INVALID_CALLBACK;
/* Return error status */
status = HAL_ERROR;
break;
}
}
else
{
/* Update the error code */
hmdios->ErrorCode |= HAL_MDIOS_ERROR_INVALID_CALLBACK;
/* Return error status */
status = HAL_ERROR;
}
/* Release Lock */
__HAL_UNLOCK(hmdios);
return status;
}
#endif /* USE_HAL_MDIOS_REGISTER_CALLBACKS */
/**
* @}
*/
/** @defgroup MDIOS_Exported_Functions_Group2 IO operation functions
* @brief MDIOS Read/Write functions
*
@verbatim
===============================================================================
##### IO operation functions #####
===============================================================================
This subsection provides a set of functions allowing to manage the MDIOS
read and write operations.
(#) APIs that allow to the MDIOS to read/write from/to the
values of one of the DINn/DOUTn registers:
(+) Read the value of a DINn register: HAL_MDIOS_ReadReg()
(+) Write a value to a DOUTn register: HAL_MDIOS_WriteReg()
(#) APIs that provide if there are some Slave registres have been
read or written by the Master:
(+) DOUTn registers read by Master: HAL_MDIOS_GetReadRegAddress()
(+) DINn registers written by Master : HAL_MDIOS_GetWrittenRegAddress()
(#) APIs that Clear the read/write flags:
(+) Clear read registers flags: HAL_MDIOS_ClearReadRegAddress()
(+) Clear write registers flags: HAL_MDIOS_ClearWriteRegAddress()
(#) A set of Callbacks are provided:
(+) HAL_MDIOS_WriteCpltCallback()
(+) HAL_MDIOS_ReadCpltCallback()
(+) HAL_MDIOS_ErrorCallback()
@endverbatim
* @{
*/
/**
* @brief Writes to an MDIOS output register
* @param hmdios: mdios handle
* @param RegNum: MDIOS output register address
* @param Data: Data to write
* @retval HAL status
*/
HAL_StatusTypeDef HAL_MDIOS_WriteReg(MDIOS_HandleTypeDef *hmdios, uint32_t RegNum, uint16_t Data)
{
uint32_t tmpreg;
/* Check the parameters */
assert_param(IS_MDIOS_REGISTER(RegNum));
/* Process Locked */
__HAL_LOCK(hmdios);
/* Get the addr of output register to be written by the MDIOS */
tmpreg = MDIOS_DOUT_BASE_ADDR + (4U * RegNum);
/* Write to DOUTn register */
*((uint32_t *)tmpreg) = Data;
/* Process Unlocked */
__HAL_UNLOCK(hmdios);
return HAL_OK;
}
/**
* @brief Reads an MDIOS input register
* @param hmdios: mdios handle
* @param RegNum: MDIOS input register address
* @param pData: pointer to Data
* @retval HAL status
*/
HAL_StatusTypeDef HAL_MDIOS_ReadReg(MDIOS_HandleTypeDef *hmdios, uint32_t RegNum, uint16_t *pData)
{
uint32_t tmpreg;
/* Check the parameters */
assert_param(IS_MDIOS_REGISTER(RegNum));
/* Process Locked */
__HAL_LOCK(hmdios);
/* Get the addr of input register to be read by the MDIOS */
tmpreg = MDIOS_DIN_BASE_ADDR + (4U * RegNum);
/* Read DINn register */
*pData = (uint16_t)(*((uint32_t *)tmpreg));
/* Process Unlocked */
__HAL_UNLOCK(hmdios);
return HAL_OK;
}
/**
* @brief Gets Written registers by MDIO master
* @param hmdios: mdios handle
* @retval bit map of written registers addresses
*/
uint32_t HAL_MDIOS_GetWrittenRegAddress(MDIOS_HandleTypeDef *hmdios)
{
return hmdios->Instance->WRFR;
}
/**
* @brief Gets Read registers by MDIO master
* @param hmdios: mdios handle
* @retval bit map of read registers addresses
*/
uint32_t HAL_MDIOS_GetReadRegAddress(MDIOS_HandleTypeDef *hmdios)
{
return hmdios->Instance->RDFR;
}
/**
* @brief Clears Write registers flag
* @param hmdios: mdios handle
* @param RegNum: registers addresses to be cleared
* @retval HAL status
*/
HAL_StatusTypeDef HAL_MDIOS_ClearWriteRegAddress(MDIOS_HandleTypeDef *hmdios, uint32_t RegNum)
{
/* Check the parameters */
assert_param(IS_MDIOS_REGISTER(RegNum));
/* Process Locked */
__HAL_LOCK(hmdios);
/* Clear write registers flags */
hmdios->Instance->CWRFR |= (RegNum);
/* Release Lock */
__HAL_UNLOCK(hmdios);
return HAL_OK;
}
/**
* @brief Clears Read register flag
* @param hmdios: mdios handle
* @param RegNum: registers addresses to be cleared
* @retval HAL status
*/
HAL_StatusTypeDef HAL_MDIOS_ClearReadRegAddress(MDIOS_HandleTypeDef *hmdios, uint32_t RegNum)
{
/* Check the parameters */
assert_param(IS_MDIOS_REGISTER(RegNum));
/* Process Locked */
__HAL_LOCK(hmdios);
/* Clear read registers flags */
hmdios->Instance->CRDFR |= (RegNum);
/* Release Lock */
__HAL_UNLOCK(hmdios);
return HAL_OK;
}
/**
* @brief Enables Events for MDIOS peripheral
* @param hmdios: mdios handle
* @retval HAL status
*/
HAL_StatusTypeDef HAL_MDIOS_EnableEvents(MDIOS_HandleTypeDef *hmdios)
{
/* Process Locked */
__HAL_LOCK(hmdios);
/* Enable MDIOS interrupts: Register Write, Register Read and Error ITs */
__HAL_MDIOS_ENABLE_IT(hmdios, (MDIOS_IT_WRITE | MDIOS_IT_READ | MDIOS_IT_ERROR));
/* Process Unlocked */
__HAL_UNLOCK(hmdios);
return HAL_OK;
}
/**
* @brief This function handles MDIOS interrupt request.
* @param hmdios: MDIOS handle
* @retval None
*/
void HAL_MDIOS_IRQHandler(MDIOS_HandleTypeDef *hmdios)
{
/* Write Register Interrupt enabled ? */
if(__HAL_MDIOS_GET_IT_SOURCE(hmdios, MDIOS_IT_WRITE) != (uint32_t)RESET)
{
/* Write register flag */
if(HAL_MDIOS_GetWrittenRegAddress(hmdios) != (uint32_t)RESET)
{
#if (USE_HAL_MDIOS_REGISTER_CALLBACKS == 1)
/*Call registered Write complete callback*/
hmdios->WriteCpltCallback(hmdios);
#else
/* Write callback function */
HAL_MDIOS_WriteCpltCallback(hmdios);
#endif /* USE_HAL_MDIOS_REGISTER_CALLBACKS */
/* Clear write register flag */
hmdios->Instance->CWRFR |= MDIOS_ALL_REG_FLAG;
}
}
/* Read Register Interrupt enabled ? */
if(__HAL_MDIOS_GET_IT_SOURCE(hmdios, MDIOS_IT_READ) != (uint32_t)RESET)
{
/* Read register flag */
if(HAL_MDIOS_GetReadRegAddress(hmdios) != (uint32_t)RESET)
{
#if (USE_HAL_MDIOS_REGISTER_CALLBACKS == 1)
/*Call registered Read complete callback*/
hmdios->ReadCpltCallback(hmdios);
#else
/* Read callback function */
HAL_MDIOS_ReadCpltCallback(hmdios);
#endif /* USE_HAL_MDIOS_REGISTER_CALLBACKS */
/* Clear read register flag */
hmdios->Instance->CRDFR |= MDIOS_ALL_REG_FLAG;
}
}
/* Error Interrupt enabled ? */
if(__HAL_MDIOS_GET_IT_SOURCE(hmdios, MDIOS_IT_ERROR) != (uint32_t)RESET)
{
/* All Errors Flag */
if(__HAL_MDIOS_GET_ERROR_FLAG(hmdios, MDIOS_ALL_ERRORS_FLAG) != (uint32_t)RESET)
{
hmdios->ErrorCode |= HAL_MDIOS_ERROR_DATA;
#if (USE_HAL_MDIOS_REGISTER_CALLBACKS == 1)
/*Call registered Error callback*/
hmdios->ErrorCallback(hmdios);
#else
/* Error Callback */
HAL_MDIOS_ErrorCallback(hmdios);
#endif /* USE_HAL_MDIOS_REGISTER_CALLBACKS */
/* Clear errors flag */
__HAL_MDIOS_CLEAR_ERROR_FLAG(hmdios, MDIOS_ALL_ERRORS_FLAG);
}
hmdios->ErrorCode = HAL_MDIOS_ERROR_NONE;
}
#if defined(DUAL_CORE)
if (HAL_GetCurrentCPUID() == CM7_CPUID)
{
if(__HAL_MDIOS_WAKEUP_EXTI_GET_FLAG(MDIOS_WAKEUP_EXTI_LINE) != (uint32_t)RESET)
{
/* Clear MDIOS WAKEUP Exti pending bit */
__HAL_MDIOS_WAKEUP_EXTI_CLEAR_FLAG(MDIOS_WAKEUP_EXTI_LINE);
#if (USE_HAL_MDIOS_REGISTER_CALLBACKS == 1)
/*Call registered WakeUp callback*/
hmdios->WakeUpCallback(hmdios);
#else
/* MDIOS WAKEUP callback */
HAL_MDIOS_WakeUpCallback(hmdios);
#endif /* USE_HAL_MDIOS_REGISTER_CALLBACKS */
}
}
else
{
if(__HAL_MDIOS_WAKEUP_EXTID2_GET_FLAG(MDIOS_WAKEUP_EXTI_LINE) != (uint32_t)RESET)
{
/* Clear MDIOS WAKEUP Exti D2 pending bit */
__HAL_MDIOS_WAKEUP_EXTID2_CLEAR_FLAG(MDIOS_WAKEUP_EXTI_LINE);
#if (USE_HAL_MDIOS_REGISTER_CALLBACKS == 1)
/*Call registered WakeUp callback*/
hmdios->WakeUpCallback(hmdios);
#else
/* MDIOS WAKEUP callback */
HAL_MDIOS_WakeUpCallback(hmdios);
#endif /* USE_HAL_MDIOS_REGISTER_CALLBACKS */
}
}
#else
/* check MDIOS WAKEUP exti flag */
if(__HAL_MDIOS_WAKEUP_EXTI_GET_FLAG(MDIOS_WAKEUP_EXTI_LINE) != (uint32_t)RESET)
{
/* Clear MDIOS WAKEUP Exti pending bit */
__HAL_MDIOS_WAKEUP_EXTI_CLEAR_FLAG(MDIOS_WAKEUP_EXTI_LINE);
#if (USE_HAL_MDIOS_REGISTER_CALLBACKS == 1)
/*Call registered WakeUp callback*/
hmdios->WakeUpCallback(hmdios);
#else
/* MDIOS WAKEUP callback */
HAL_MDIOS_WakeUpCallback(hmdios);
#endif /* USE_HAL_MDIOS_REGISTER_CALLBACKS */
}
#endif
}
/**
* @brief Write Complete Callback
* @param hmdios: mdios handle
* @retval None
*/
__weak void HAL_MDIOS_WriteCpltCallback(MDIOS_HandleTypeDef *hmdios)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hmdios);
/* NOTE : This function should not be modified, when the callback is needed,
the HAL_MDIOS_WriteCpltCallback can be implemented in the user file
*/
}
/**
* @brief Read Complete Callback
* @param hmdios: mdios handle
* @retval None
*/
__weak void HAL_MDIOS_ReadCpltCallback(MDIOS_HandleTypeDef *hmdios)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hmdios);
/* NOTE : This function should not be modified, when the callback is needed,
the HAL_MDIOS_ReadCpltCallback can be implemented in the user file
*/
}
/**
* @brief Error Callback
* @param hmdios: mdios handle
* @retval None
*/
__weak void HAL_MDIOS_ErrorCallback(MDIOS_HandleTypeDef *hmdios)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hmdios);
/* NOTE : This function should not be modified, when the callback is needed,
the HAL_MDIOS_ErrorCallback can be implemented in the user file
*/
}
/**
* @brief MDIOS WAKEUP interrupt callback
* @param hmdios: mdios handle
* @retval None
*/
__weak void HAL_MDIOS_WakeUpCallback(MDIOS_HandleTypeDef *hmdios)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hmdios);
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_MDIOS_WakeUpCallback could be implemented in the user file
*/
}
/**
* @}
*/
/** @defgroup MDIOS_Exported_Functions_Group3 Peripheral Control functions
* @brief MDIOS control functions
*
@verbatim
===============================================================================
##### Peripheral Control functions #####
===============================================================================
[..]
This subsection provides a set of functions allowing to control the MDIOS.
(+) HAL_MDIOS_GetState() API, helpful to check in run-time the state.
(+) HAL_MDIOS_GetError() API, returns the errors code of the HAL state machine.
@endverbatim
* @{
*/
/**
* @brief Gets MDIOS error code
* @param hmdios: mdios handle
* @retval mdios error code
*/
uint32_t HAL_MDIOS_GetError(MDIOS_HandleTypeDef *hmdios)
{
/* return the error code */
return hmdios->ErrorCode;
}
/**
* @brief Return the MDIOS HAL state
* @param hmdios: mdios handle
* @retval HAL state
*/
HAL_MDIOS_StateTypeDef HAL_MDIOS_GetState(MDIOS_HandleTypeDef *hmdios)
{
/* Return MDIOS state */
return hmdios->State;
}
/**
* @}
*/
/**
* @}
*/
#if (USE_HAL_MDIOS_REGISTER_CALLBACKS == 1)
/** @addtogroup MDIOS_Private_Functions
* @{
*/
static void MDIOS_InitCallbacksToDefault(MDIOS_HandleTypeDef *hmdios)
{
/* Init the MDIOS Callback settings */
hmdios->WriteCpltCallback = HAL_MDIOS_WriteCpltCallback; /* Legacy weak WriteCpltCallback */
hmdios->ReadCpltCallback = HAL_MDIOS_ReadCpltCallback; /* Legacy weak ReadCpltCallback */
hmdios->ErrorCallback = HAL_MDIOS_ErrorCallback; /* Legacy weak ErrorCallback */
hmdios->WakeUpCallback = HAL_MDIOS_WakeUpCallback; /* Legacy weak WakeUpCallback */
}
/**
* @}
*/
#endif /* USE_HAL_MDIOS_REGISTER_CALLBACKS */
#endif /* HAL_MDIOS_MODULE_ENABLED */
/**
* @}
*/
#endif /* MDIOS */
/**
* @}
*/