steering-wheel/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pwr_ex.h

790 lines
31 KiB
C

/**
******************************************************************************
* @file stm32h7xx_hal_pwr_ex.h
* @author MCD Application Team
* @brief Header file of PWR HAL Extension module.
******************************************************************************
* @attention
*
* Copyright (c) 2017 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32H7xx_HAL_PWR_EX_H
#define STM32H7xx_HAL_PWR_EX_H
#ifdef __cplusplus
extern "C" {
#endif /* __cplusplus */
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal_def.h"
/** @addtogroup STM32H7xx_HAL_Driver
* @{
*/
/** @addtogroup PWREx
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup PWREx_Exported_Types PWREx Exported Types
* @{
*/
/**
* @brief PWREx AVD configuration structure definition
*/
typedef struct
{
uint32_t AVDLevel; /*!< AVDLevel : Specifies the AVD detection level. This
parameter can be a value of @ref
PWREx_AVD_detection_level
*/
uint32_t Mode; /*!< Mode : Specifies the EXTI operating mode for the AVD
event. This parameter can be a value of @ref
PWREx_AVD_Mode.
*/
}PWREx_AVDTypeDef;
/**
* @brief PWREx Wakeup pin configuration structure definition
*/
typedef struct
{
uint32_t WakeUpPin; /*!< WakeUpPin: Specifies the Wake-Up pin to be enabled.
This parameter can be a value of @ref
PWREx_WakeUp_Pins
*/
uint32_t PinPolarity; /*!< PinPolarity: Specifies the Wake-Up pin polarity.
This parameter can be a value of @ref
PWREx_PIN_Polarity
*/
uint32_t PinPull; /*!< PinPull: Specifies the Wake-Up pin pull. This
parameter can be a value of @ref
PWREx_PIN_Pull
*/
}PWREx_WakeupPinTypeDef;
#if defined (PWR_CSR1_MMCVDO)
/**
* @brief PWR VDDMMC voltage level enum definition
*/
typedef enum
{
PWR_MMC_VOLTAGE_BELOW_1V2, /*!< VDDMMC is below 1V2 */
PWR_MMC_VOLTAGE_EQUAL_ABOVE_1V2 /*!< VDDMMC is above or equal 1V2 */
} PWREx_MMC_VoltageLevel;
#endif /* defined (PWR_CSR1_MMCVDO) */
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup PWREx_Exported_Constants PWREx Exported Constants
* @{
*/
/** @defgroup PWREx_WakeUp_Pins PWREx Wake-Up Pins
* @{
*/
/* High level and No pull (default configuration) */
#define PWR_WAKEUP_PIN6 PWR_WKUPEPR_WKUPEN6
#if defined (PWR_WKUPEPR_WKUPEN5)
#define PWR_WAKEUP_PIN5 PWR_WKUPEPR_WKUPEN5
#endif /* defined (PWR_WKUPEPR_WKUPEN5) */
#define PWR_WAKEUP_PIN4 PWR_WKUPEPR_WKUPEN4
#if defined (PWR_WKUPEPR_WKUPEN3)
#define PWR_WAKEUP_PIN3 PWR_WKUPEPR_WKUPEN3
#endif /* defined (PWR_WKUPEPR_WKUPEN3) */
#define PWR_WAKEUP_PIN2 PWR_WKUPEPR_WKUPEN2
#define PWR_WAKEUP_PIN1 PWR_WKUPEPR_WKUPEN1
/* High level and No pull */
#define PWR_WAKEUP_PIN6_HIGH PWR_WKUPEPR_WKUPEN6
#if defined (PWR_WKUPEPR_WKUPEN5)
#define PWR_WAKEUP_PIN5_HIGH PWR_WKUPEPR_WKUPEN5
#endif /* defined (PWR_WKUPEPR_WKUPEN5) */
#define PWR_WAKEUP_PIN4_HIGH PWR_WKUPEPR_WKUPEN4
#if defined (PWR_WKUPEPR_WKUPEN3)
#define PWR_WAKEUP_PIN3_HIGH PWR_WKUPEPR_WKUPEN3
#endif /* defined (PWR_WKUPEPR_WKUPEN3) */
#define PWR_WAKEUP_PIN2_HIGH PWR_WKUPEPR_WKUPEN2
#define PWR_WAKEUP_PIN1_HIGH PWR_WKUPEPR_WKUPEN1
/* Low level and No pull */
#define PWR_WAKEUP_PIN6_LOW (PWR_WKUPEPR_WKUPP6 | PWR_WKUPEPR_WKUPEN6)
#if defined (PWR_WKUPEPR_WKUPP5)
#define PWR_WAKEUP_PIN5_LOW (PWR_WKUPEPR_WKUPP5 | PWR_WKUPEPR_WKUPEN5)
#endif /* defined (PWR_WKUPEPR_WKUPP5) */
#define PWR_WAKEUP_PIN4_LOW (PWR_WKUPEPR_WKUPP4 | PWR_WKUPEPR_WKUPEN4)
#if defined (PWR_WKUPEPR_WKUPP3)
#define PWR_WAKEUP_PIN3_LOW (PWR_WKUPEPR_WKUPP3 | PWR_WKUPEPR_WKUPEN3)
#endif /* defined (PWR_WKUPEPR_WKUPP3) */
#define PWR_WAKEUP_PIN2_LOW (PWR_WKUPEPR_WKUPP2 | PWR_WKUPEPR_WKUPEN2)
#define PWR_WAKEUP_PIN1_LOW (PWR_WKUPEPR_WKUPP1 | PWR_WKUPEPR_WKUPEN1)
/**
* @}
*/
/** @defgroup PWREx_PIN_Polarity PWREx Pin Polarity configuration
* @{
*/
#define PWR_PIN_POLARITY_HIGH (0x00000000U)
#define PWR_PIN_POLARITY_LOW (0x00000001U)
/**
* @}
*/
/** @defgroup PWREx_PIN_Pull PWREx Pin Pull configuration
* @{
*/
#define PWR_PIN_NO_PULL (0x00000000U)
#define PWR_PIN_PULL_UP (0x00000001U)
#define PWR_PIN_PULL_DOWN (0x00000002U)
/**
* @}
*/
/** @defgroup PWREx_Wakeup_Pins_Flags PWREx Wakeup Pins Flags.
* @{
*/
#define PWR_WAKEUP_FLAG1 PWR_WKUPFR_WKUPF1 /*!< Wakeup flag on PA0 */
#define PWR_WAKEUP_FLAG2 PWR_WKUPFR_WKUPF2 /*!< Wakeup flag on PA2 */
#if defined (PWR_WKUPFR_WKUPF3)
#define PWR_WAKEUP_FLAG3 PWR_WKUPFR_WKUPF3 /*!< Wakeup flag on PI8 */
#endif /* defined (PWR_WKUPFR_WKUPF3) */
#define PWR_WAKEUP_FLAG4 PWR_WKUPFR_WKUPF4 /*!< Wakeup flag on PC13 */
#if defined (PWR_WKUPFR_WKUPF5)
#define PWR_WAKEUP_FLAG5 PWR_WKUPFR_WKUPF5 /*!< Wakeup flag on PI11 */
#endif /* defined (PWR_WKUPFR_WKUPF5) */
#define PWR_WAKEUP_FLAG6 PWR_WKUPFR_WKUPF6 /*!< Wakeup flag on PC1 */
#if defined (PWR_WKUPFR_WKUPF3)
#define PWR_WAKEUP_FLAG_ALL (PWR_WKUPFR_WKUPF1 | PWR_WKUPFR_WKUPF2 |\
PWR_WKUPFR_WKUPF3 | PWR_WKUPFR_WKUPF4 |\
PWR_WKUPFR_WKUPF5 | PWR_WKUPFR_WKUPF6)
#else
#define PWR_WAKEUP_FLAG_ALL (PWR_WKUPFR_WKUPF1 | PWR_WKUPFR_WKUPF2 |\
PWR_WKUPFR_WKUPF4 | PWR_WKUPFR_WKUPF6)
#endif /* defined (PWR_WKUPFR_WKUPF3) */
/**
* @}
*/
#if defined (DUAL_CORE)
/** @defgroup PWREx_Core_Select PWREx Core definition
* @{
*/
#define PWR_CORE_CPU1 (0x00000000U)
#define PWR_CORE_CPU2 (0x00000001U)
/**
* @}
*/
#endif /* defined (DUAL_CORE) */
/** @defgroup PWREx_Domains PWREx Domains definition
* @{
*/
#define PWR_D1_DOMAIN (0x00000000U)
#if defined (PWR_CPUCR_PDDS_D2)
#define PWR_D2_DOMAIN (0x00000001U)
#endif /* defined (PWR_CPUCR_PDDS_D2) */
#define PWR_D3_DOMAIN (0x00000002U)
/**
* @}
*/
/** @defgroup PWREx_Domain_Flags PWREx Domain Flags definition
* @{
*/
#if defined (DUAL_CORE)
#define PWR_D1_DOMAIN_FLAGS (0x00000000U)
#define PWR_D2_DOMAIN_FLAGS (0x00000001U)
#define PWR_ALL_DOMAIN_FLAGS (0x00000002U)
#else
#define PWR_CPU_FLAGS (0x00000000U)
#endif /* defined (DUAL_CORE) */
/**
* @}
*/
/** @defgroup PWREx_D3_State PWREx D3 Domain State
* @{
*/
#define PWR_D3_DOMAIN_STOP (0x00000000U)
#define PWR_D3_DOMAIN_RUN (0x00000800U)
/**
* @}
*/
/** @defgroup PWREx_Supply_configuration PWREx Supply configuration
* @{
*/
#define PWR_LDO_SUPPLY PWR_CR3_LDOEN /*!< Core domains are supplied from the LDO */
#if defined (SMPS)
#define PWR_DIRECT_SMPS_SUPPLY PWR_CR3_SMPSEN /*!< Core domains are supplied from the SMPS only */
#define PWR_SMPS_1V8_SUPPLIES_LDO (PWR_CR3_SMPSLEVEL_0 | PWR_CR3_SMPSEN | PWR_CR3_LDOEN) /*!< The SMPS 1.8V output supplies the LDO which supplies the Core domains */
#define PWR_SMPS_2V5_SUPPLIES_LDO (PWR_CR3_SMPSLEVEL_1 | PWR_CR3_SMPSEN | PWR_CR3_LDOEN) /*!< The SMPS 2.5V output supplies the LDO which supplies the Core domains */
#define PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO (PWR_CR3_SMPSLEVEL_0 | PWR_CR3_SMPSEXTHP | PWR_CR3_SMPSEN | PWR_CR3_LDOEN) /*!< The SMPS 1.8V output supplies an external circuits and the LDO. The Core domains are supplied from the LDO */
#define PWR_SMPS_2V5_SUPPLIES_EXT_AND_LDO (PWR_CR3_SMPSLEVEL_1 | PWR_CR3_SMPSEXTHP | PWR_CR3_SMPSEN | PWR_CR3_LDOEN) /*!< The SMPS 2.5V output supplies an external circuits and the LDO. The Core domains are supplied from the LDO */
#define PWR_SMPS_1V8_SUPPLIES_EXT (PWR_CR3_SMPSLEVEL_0 | PWR_CR3_SMPSEXTHP | PWR_CR3_SMPSEN | PWR_CR3_BYPASS) /*!< The SMPS 1.8V output supplies an external source which supplies the Core domains */
#define PWR_SMPS_2V5_SUPPLIES_EXT (PWR_CR3_SMPSLEVEL_1 | PWR_CR3_SMPSEXTHP | PWR_CR3_SMPSEN | PWR_CR3_BYPASS) /*!< The SMPS 2.5V output supplies an external source which supplies the Core domains */
#endif /* defined (SMPS) */
#define PWR_EXTERNAL_SOURCE_SUPPLY PWR_CR3_BYPASS /*!< The SMPS disabled and the LDO Bypass. The Core domains are supplied from an external source */
#if defined (SMPS)
#define PWR_SUPPLY_CONFIG_MASK (PWR_CR3_SMPSLEVEL | PWR_CR3_SMPSEXTHP | \
PWR_CR3_SMPSEN | PWR_CR3_LDOEN | PWR_CR3_BYPASS)
#else
#define PWR_SUPPLY_CONFIG_MASK (PWR_CR3_SCUEN | PWR_CR3_LDOEN | PWR_CR3_BYPASS)
#endif /* defined (SMPS) */
/**
* @}
*/
/** @defgroup PWREx_AVD_detection_level PWREx AVD detection level
* @{
*/
#define PWR_AVDLEVEL_0 PWR_CR1_ALS_LEV0 /*!< Analog voltage detector level 0
selection : 1V7 */
#define PWR_AVDLEVEL_1 PWR_CR1_ALS_LEV1 /*!< Analog voltage detector level 1
selection : 2V1 */
#define PWR_AVDLEVEL_2 PWR_CR1_ALS_LEV2 /*!< Analog voltage detector level 2
selection : 2V5 */
#define PWR_AVDLEVEL_3 PWR_CR1_ALS_LEV3 /*!< Analog voltage detector level 3
selection : 2V8 */
/**
* @}
*/
/** @defgroup PWREx_AVD_Mode PWREx AVD Mode
* @{
*/
#define PWR_AVD_MODE_NORMAL (0x00000000U) /*!< Basic mode is used */
#define PWR_AVD_MODE_IT_RISING (0x00010001U) /*!< External Interrupt Mode with Rising edge trigger detection */
#define PWR_AVD_MODE_IT_FALLING (0x00010002U) /*!< External Interrupt Mode with Falling edge trigger detection */
#define PWR_AVD_MODE_IT_RISING_FALLING (0x00010003U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
#define PWR_AVD_MODE_EVENT_RISING (0x00020001U) /*!< Event Mode with Rising edge trigger detection */
#define PWR_AVD_MODE_EVENT_FALLING (0x00020002U) /*!< Event Mode with Falling edge trigger detection */
#define PWR_AVD_MODE_EVENT_RISING_FALLING (0x00020003U) /*!< Event Mode with Rising/Falling edge trigger detection */
/**
* @}
*/
/** @defgroup PWREx_Regulator_Voltage_Scale PWREx Regulator Voltage Scale
* @{
*/
#define PWR_REGULATOR_SVOS_SCALE5 (PWR_CR1_SVOS_0)
#define PWR_REGULATOR_SVOS_SCALE4 (PWR_CR1_SVOS_1)
#define PWR_REGULATOR_SVOS_SCALE3 (PWR_CR1_SVOS_0 | PWR_CR1_SVOS_1)
/**
* @}
*/
/** @defgroup PWREx_VBAT_Battery_Charging_Resistor PWR battery charging resistor selection
* @{
*/
#define PWR_BATTERY_CHARGING_RESISTOR_5 (0x00000000U) /*!< VBAT charging through a 5 kOhms resistor */
#define PWR_BATTERY_CHARGING_RESISTOR_1_5 PWR_CR3_VBRS /*!< VBAT charging through a 1.5 kOhms resistor */
/**
* @}
*/
/** @defgroup PWREx_VBAT_Thresholds PWREx VBAT Thresholds
* @{
*/
#define PWR_VBAT_BETWEEN_HIGH_LOW_THRESHOLD (0x00000000U)
#define PWR_VBAT_BELOW_LOW_THRESHOLD PWR_CR2_VBATL
#define PWR_VBAT_ABOVE_HIGH_THRESHOLD PWR_CR2_VBATH
/**
* @}
*/
/** @defgroup PWREx_TEMP_Thresholds PWREx Temperature Thresholds
* @{
*/
#define PWR_TEMP_BETWEEN_HIGH_LOW_THRESHOLD (0x00000000U)
#define PWR_TEMP_BELOW_LOW_THRESHOLD PWR_CR2_TEMPL
#define PWR_TEMP_ABOVE_HIGH_THRESHOLD PWR_CR2_TEMPH
/**
* @}
*/
/** @defgroup PWREx_AVD_EXTI_Line PWREx AVD EXTI Line 16
* @{
*/
#define PWR_EXTI_LINE_AVD EXTI_IMR1_IM16 /*!< External interrupt line 16
Connected to the AVD EXTI Line */
/**
* @}
*/
#if defined (PWR_CR1_SRDRAMSO)
/** @defgroup PWREx_Memory_Shut_Off Memory shut-off block selection
* @{
*/
#define PWR_SRD_AHB_MEMORY_BLOCK PWR_CR1_SRDRAMSO /*!< SmartRun domain AHB memory shut-off in DStop/DStop2 low-power mode */
#define PWR_USB_FDCAN_MEMORY_BLOCK PWR_CR1_HSITFSO /*!< High-speed interfaces USB and FDCAN memories shut-off in DStop/DStop2 mode */
#define PWR_GFXMMU_JPEG_MEMORY_BLOCK PWR_CR1_GFXSO /*!< GFXMMU and JPEG memories shut-off in DStop/DStop2 mode */
#define PWR_TCM_ECM_MEMORY_BLOCK PWR_CR1_ITCMSO /*!< Instruction TCM and ETM memories shut-off in DStop/DStop2 mode */
#define PWR_RAM1_AHB_MEMORY_BLOCK PWR_CR1_AHBRAM1SO /*!< AHB RAM1 shut-off in DStop/DStop2 mode */
#define PWR_RAM2_AHB_MEMORY_BLOCK PWR_CR1_AHBRAM2SO /*!< AHB RAM2 shut-off in DStop/DStop2 mode */
#define PWR_RAM1_AXI_MEMORY_BLOCK PWR_CR1_AXIRAM1SO /*!< AXI RAM1 shut-off in DStop/DStop2 mode */
#define PWR_RAM2_AXI_MEMORY_BLOCK PWR_CR1_AXIRAM2SO /*!< AXI RAM2 shut-off in DStop/DStop2 mode */
#define PWR_RAM3_AXI_MEMORY_BLOCK PWR_CR1_AXIRAM3SO /*!< AXI RAM3 shut-off in DStop/DStop2 mode */
#define PWR_MEMORY_BLOCK_KEEP_ON 0U /*!< Memory content is kept in DStop or DStop2 mode */
#define PWR_MEMORY_BLOCK_SHUT_OFF 1U /*!< Memory content is lost in DStop or DStop2 mode */
/**
* @}
*/
#endif /* defined (PWR_CR1_SRDRAMSO) */
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup PWREx_Exported_Macro PWREx Exported Macro
* @{
*/
/**
* @brief Enable the AVD EXTI Line 16.
* @retval None.
*/
#define __HAL_PWR_AVD_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR1, PWR_EXTI_LINE_AVD)
#if defined (DUAL_CORE)
/**
* @brief Enable the AVD EXTI D2 Line 16.
* @retval None.
*/
#define __HAL_PWR_AVD_EXTID2_ENABLE_IT() SET_BIT(EXTI_D2->IMR1, PWR_EXTI_LINE_AVD)
#endif /* defined (DUAL_CORE) */
/**
* @brief Disable the AVD EXTI Line 16
* @retval None.
*/
#define __HAL_PWR_AVD_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR1, PWR_EXTI_LINE_AVD)
#if defined (DUAL_CORE)
/**
* @brief Disable the AVD EXTI D2 Line 16.
* @retval None.
*/
#define __HAL_PWR_AVD_EXTID2_DISABLE_IT() CLEAR_BIT(EXTI_D2->IMR1, PWR_EXTI_LINE_AVD)
#endif /* defined (DUAL_CORE) */
/**
* @brief Enable event on AVD EXTI Line 16.
* @retval None.
*/
#define __HAL_PWR_AVD_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR1, PWR_EXTI_LINE_AVD)
#if defined (DUAL_CORE)
/**
* @brief Enable event on AVD EXTI D2 Line 16.
* @retval None.
*/
#define __HAL_PWR_AVD_EXTID2_ENABLE_EVENT() SET_BIT(EXTI_D2->EMR1, PWR_EXTI_LINE_AVD)
#endif /* defined (DUAL_CORE) */
/**
* @brief Disable event on AVD EXTI Line 16.
* @retval None.
*/
#define __HAL_PWR_AVD_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR1, PWR_EXTI_LINE_AVD)
#if defined (DUAL_CORE)
/**
* @brief Disable event on AVD EXTI D2 Line 16.
* @retval None.
*/
#define __HAL_PWR_AVD_EXTID2_DISABLE_EVENT() CLEAR_BIT(EXTI_D2->EMR1, PWR_EXTI_LINE_AVD)
#endif /* defined (DUAL_CORE) */
/**
* @brief Enable the AVD Extended Interrupt Rising Trigger.
* @retval None.
*/
#define __HAL_PWR_AVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR1, PWR_EXTI_LINE_AVD)
/**
* @brief Disable the AVD Extended Interrupt Rising Trigger.
* @retval None.
*/
#define __HAL_PWR_AVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR1, PWR_EXTI_LINE_AVD)
/**
* @brief Enable the AVD Extended Interrupt Falling Trigger.
* @retval None.
*/
#define __HAL_PWR_AVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR1, PWR_EXTI_LINE_AVD)
/**
* @brief Disable the AVD Extended Interrupt Falling Trigger.
* @retval None.
*/
#define __HAL_PWR_AVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR1, PWR_EXTI_LINE_AVD)
/**
* @brief Enable the AVD Extended Interrupt Rising and Falling Trigger.
* @retval None.
*/
#define __HAL_PWR_AVD_EXTI_ENABLE_RISING_FALLING_EDGE() \
do { \
__HAL_PWR_AVD_EXTI_ENABLE_RISING_EDGE(); \
__HAL_PWR_AVD_EXTI_ENABLE_FALLING_EDGE(); \
} while(0);
/**
* @brief Disable the AVD Extended Interrupt Rising & Falling Trigger.
* @retval None.
*/
#define __HAL_PWR_AVD_EXTI_DISABLE_RISING_FALLING_EDGE() \
do { \
__HAL_PWR_AVD_EXTI_DISABLE_RISING_EDGE(); \
__HAL_PWR_AVD_EXTI_DISABLE_FALLING_EDGE(); \
} while(0);
/**
* @brief Check whether the specified AVD EXTI interrupt flag is set or not.
* @retval EXTI AVD Line Status.
*/
#define __HAL_PWR_AVD_EXTI_GET_FLAG() ((READ_BIT(EXTI->PR1, PWR_EXTI_LINE_AVD) == PWR_EXTI_LINE_AVD) ? 1UL : 0UL)
#if defined (DUAL_CORE)
/**
* @brief Check whether the specified AVD EXTI D2 interrupt flag is set or not.
* @retval EXTI D2 AVD Line Status.
*/
#define __HAL_PWR_AVD_EXTID2_GET_FLAG() ((READ_BIT(EXTI_D2->PR1, PWR_EXTI_LINE_AVD) == PWR_EXTI_LINE_AVD) ? 1UL : 0UL)
#endif /* defined (DUAL_CORE) */
/**
* @brief Clear the AVD EXTI flag.
* @retval None.
*/
#define __HAL_PWR_AVD_EXTI_CLEAR_FLAG() SET_BIT(EXTI->PR1, PWR_EXTI_LINE_AVD)
#if defined (DUAL_CORE)
/**
* @brief Clear the AVD EXTI D2 flag.
* @retval None.
*/
#define __HAL_PWR_AVD_EXTID2_CLEAR_FLAG() SET_BIT(EXTI_D2->PR1, PWR_EXTI_LINE_AVD)
#endif /* defined (DUAL_CORE) */
/**
* @brief Generates a Software interrupt on AVD EXTI line.
* @retval None.
*/
#define __HAL_PWR_AVD_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER1, PWR_EXTI_LINE_AVD)
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup PWREx_Exported_Functions PWREx Exported Functions
* @{
*/
/** @addtogroup PWREx_Exported_Functions_Group1 Power Supply Control Functions
* @{
*/
HAL_StatusTypeDef HAL_PWREx_ConfigSupply (uint32_t SupplySource);
uint32_t HAL_PWREx_GetSupplyConfig (void);
HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling (uint32_t VoltageScaling);
uint32_t HAL_PWREx_GetVoltageRange (void);
HAL_StatusTypeDef HAL_PWREx_ControlStopModeVoltageScaling (uint32_t VoltageScaling);
uint32_t HAL_PWREx_GetStopModeVoltageRange (void);
/**
* @}
*/
/** @addtogroup PWREx_Exported_Functions_Group2 Low Power Control Functions
* @{
*/
/* System low power control functions */
#if defined (PWR_CPUCR_RETDS_CD)
void HAL_PWREx_EnterSTOP2Mode (uint32_t Regulator, uint8_t STOPEntry);
#endif /* defined (PWR_CPUCR_RETDS_CD) */
void HAL_PWREx_EnterSTOPMode (uint32_t Regulator, uint8_t STOPEntry, uint32_t Domain);
void HAL_PWREx_EnterSTANDBYMode (uint32_t Domain);
void HAL_PWREx_ConfigD3Domain (uint32_t D3State);
/* Clear Cortex-Mx pending flag */
void HAL_PWREx_ClearPendingEvent (void);
#if defined (DUAL_CORE)
/* Clear domain flags */
void HAL_PWREx_ClearDomainFlags (uint32_t DomainFlags);
/* Core Hold/Release functions */
HAL_StatusTypeDef HAL_PWREx_HoldCore (uint32_t CPU);
void HAL_PWREx_ReleaseCore (uint32_t CPU);
#endif /* defined (DUAL_CORE) */
/* Flash low power control functions */
void HAL_PWREx_EnableFlashPowerDown (void);
void HAL_PWREx_DisableFlashPowerDown (void);
#if defined (PWR_CR1_SRDRAMSO)
/* Memory shut-off functions */
void HAL_PWREx_EnableMemoryShutOff (uint32_t MemoryBlock);
void HAL_PWREx_DisableMemoryShutOff (uint32_t MemoryBlock);
#endif /* defined(PWR_CR1_SRDRAMSO) */
/* Wakeup Pins control functions */
void HAL_PWREx_EnableWakeUpPin (PWREx_WakeupPinTypeDef *sPinParams);
void HAL_PWREx_DisableWakeUpPin (uint32_t WakeUpPin);
uint32_t HAL_PWREx_GetWakeupFlag (uint32_t WakeUpFlag);
HAL_StatusTypeDef HAL_PWREx_ClearWakeupFlag (uint32_t WakeUpFlag);
/* Power Wakeup PIN IRQ Handler */
void HAL_PWREx_WAKEUP_PIN_IRQHandler (void);
void HAL_PWREx_WKUP1_Callback (void);
void HAL_PWREx_WKUP2_Callback (void);
#if defined (PWR_WKUPEPR_WKUPEN3)
void HAL_PWREx_WKUP3_Callback (void);
#endif /* defined (PWR_WKUPEPR_WKUPEN3) */
void HAL_PWREx_WKUP4_Callback (void);
#if defined (PWR_WKUPEPR_WKUPEN5)
void HAL_PWREx_WKUP5_Callback (void);
#endif /* defined (PWR_WKUPEPR_WKUPEN5) */
void HAL_PWREx_WKUP6_Callback (void);
/**
* @}
*/
/** @addtogroup PWREx_Exported_Functions_Group3 Peripherals control functions
* @{
*/
/* Backup regulator control functions */
HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg (void);
HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg (void);
/* USB regulator control functions */
HAL_StatusTypeDef HAL_PWREx_EnableUSBReg (void);
HAL_StatusTypeDef HAL_PWREx_DisableUSBReg (void);
void HAL_PWREx_EnableUSBVoltageDetector (void);
void HAL_PWREx_DisableUSBVoltageDetector (void);
/* Battery control functions */
void HAL_PWREx_EnableBatteryCharging (uint32_t ResistorValue);
void HAL_PWREx_DisableBatteryCharging (void);
#if defined (PWR_CR1_BOOSTE)
/* Analog Booster functions */
void HAL_PWREx_EnableAnalogBooster (void);
void HAL_PWREx_DisableAnalogBooster (void);
#endif /* PWR_CR1_BOOSTE */
/**
* @}
*/
/** @addtogroup PWREx_Exported_Functions_Group4 Power Monitoring functions
* @{
*/
/* Power VBAT/Temperature monitoring functions */
void HAL_PWREx_EnableMonitoring (void);
void HAL_PWREx_DisableMonitoring (void);
uint32_t HAL_PWREx_GetTemperatureLevel (void);
uint32_t HAL_PWREx_GetVBATLevel (void);
#if defined (PWR_CSR1_MMCVDO)
PWREx_MMC_VoltageLevel HAL_PWREx_GetMMCVoltage (void);
#endif /* PWR_CSR1_MMCVDO */
/* Power AVD configuration functions */
void HAL_PWREx_ConfigAVD (PWREx_AVDTypeDef *sConfigAVD);
void HAL_PWREx_EnableAVD (void);
void HAL_PWREx_DisableAVD (void);
/* Power PVD/AVD IRQ Handler */
void HAL_PWREx_PVD_AVD_IRQHandler (void);
void HAL_PWREx_AVDCallback (void);
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup PWREx_Private_Macros PWREx Private Macros
* @{
*/
/** @defgroup PWREx_IS_PWR_Definitions PWREx Private macros to check input parameters
* @{
*/
/* Check PWR regulator configuration parameter */
#if defined (SMPS)
#define IS_PWR_SUPPLY(PWR_SOURCE) (((PWR_SOURCE) == PWR_LDO_SUPPLY) ||\
((PWR_SOURCE) == PWR_DIRECT_SMPS_SUPPLY) ||\
((PWR_SOURCE) == PWR_SMPS_1V8_SUPPLIES_LDO) ||\
((PWR_SOURCE) == PWR_SMPS_2V5_SUPPLIES_LDO) ||\
((PWR_SOURCE) == PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO) ||\
((PWR_SOURCE) == PWR_SMPS_2V5_SUPPLIES_EXT_AND_LDO) ||\
((PWR_SOURCE) == PWR_SMPS_1V8_SUPPLIES_EXT) ||\
((PWR_SOURCE) == PWR_SMPS_2V5_SUPPLIES_EXT) ||\
((PWR_SOURCE) == PWR_EXTERNAL_SOURCE_SUPPLY))
#else
#define IS_PWR_SUPPLY(PWR_SOURCE) (((PWR_SOURCE) == PWR_LDO_SUPPLY) ||\
((PWR_SOURCE) == PWR_EXTERNAL_SOURCE_SUPPLY))
#endif /* defined (SMPS) */
/* Check PWR regulator configuration in STOP mode parameter */
#define IS_PWR_STOP_MODE_REGULATOR_VOLTAGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_SVOS_SCALE3) ||\
((VOLTAGE) == PWR_REGULATOR_SVOS_SCALE4) ||\
((VOLTAGE) == PWR_REGULATOR_SVOS_SCALE5))
/* Check PWR domain parameter */
#if defined (PWR_CPUCR_PDDS_D2)
#define IS_PWR_DOMAIN(DOMAIN) (((DOMAIN) == PWR_D1_DOMAIN) ||\
((DOMAIN) == PWR_D2_DOMAIN) ||\
((DOMAIN) == PWR_D3_DOMAIN))
#else
#define IS_PWR_DOMAIN(DOMAIN) (((DOMAIN) == PWR_D1_DOMAIN) ||\
((DOMAIN) == PWR_D3_DOMAIN))
#endif /* defined (PWR_CPUCR_PDDS_D2) */
/* Check D3/SRD domain state parameter */
#define IS_D3_STATE(STATE) (((STATE) == PWR_D3_DOMAIN_STOP) ||\
((STATE) == PWR_D3_DOMAIN_RUN))
/* Check wake up pin parameter */
#if defined (PWR_WKUPEPR_WKUPEN3)
#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) ||\
((PIN) == PWR_WAKEUP_PIN2) ||\
((PIN) == PWR_WAKEUP_PIN3) ||\
((PIN) == PWR_WAKEUP_PIN4) ||\
((PIN) == PWR_WAKEUP_PIN5) ||\
((PIN) == PWR_WAKEUP_PIN6) ||\
((PIN) == PWR_WAKEUP_PIN1_HIGH) ||\
((PIN) == PWR_WAKEUP_PIN2_HIGH) ||\
((PIN) == PWR_WAKEUP_PIN3_HIGH) ||\
((PIN) == PWR_WAKEUP_PIN4_HIGH) ||\
((PIN) == PWR_WAKEUP_PIN5_HIGH) ||\
((PIN) == PWR_WAKEUP_PIN6_HIGH) ||\
((PIN) == PWR_WAKEUP_PIN1_LOW) ||\
((PIN) == PWR_WAKEUP_PIN2_LOW) ||\
((PIN) == PWR_WAKEUP_PIN3_LOW) ||\
((PIN) == PWR_WAKEUP_PIN4_LOW) ||\
((PIN) == PWR_WAKEUP_PIN5_LOW) ||\
((PIN) == PWR_WAKEUP_PIN6_LOW))
#else
#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) ||\
((PIN) == PWR_WAKEUP_PIN2) ||\
((PIN) == PWR_WAKEUP_PIN4) ||\
((PIN) == PWR_WAKEUP_PIN6) ||\
((PIN) == PWR_WAKEUP_PIN1_HIGH) ||\
((PIN) == PWR_WAKEUP_PIN2_HIGH) ||\
((PIN) == PWR_WAKEUP_PIN4_HIGH) ||\
((PIN) == PWR_WAKEUP_PIN6_HIGH) ||\
((PIN) == PWR_WAKEUP_PIN1_LOW) ||\
((PIN) == PWR_WAKEUP_PIN2_LOW) ||\
((PIN) == PWR_WAKEUP_PIN4_LOW) ||\
((PIN) == PWR_WAKEUP_PIN6_LOW))
#endif /* defined (PWR_WKUPEPR_WKUPEN3) */
/* Check wake up pin polarity parameter */
#define IS_PWR_WAKEUP_PIN_POLARITY(POLARITY) (((POLARITY) == PWR_PIN_POLARITY_HIGH) ||\
((POLARITY) == PWR_PIN_POLARITY_LOW))
/* Check wake up pin pull configuration parameter */
#define IS_PWR_WAKEUP_PIN_PULL(PULL) (((PULL) == PWR_PIN_NO_PULL) ||\
((PULL) == PWR_PIN_PULL_UP) ||\
((PULL) == PWR_PIN_PULL_DOWN))
/* Check wake up flag parameter */
#if defined (PWR_WKUPEPR_WKUPEN3)
#define IS_PWR_WAKEUP_FLAG(FLAG) (((FLAG) == PWR_WAKEUP_FLAG1) ||\
((FLAG) == PWR_WAKEUP_FLAG2) ||\
((FLAG) == PWR_WAKEUP_FLAG3) ||\
((FLAG) == PWR_WAKEUP_FLAG4) ||\
((FLAG) == PWR_WAKEUP_FLAG5) ||\
((FLAG) == PWR_WAKEUP_FLAG6) ||\
((FLAG) == PWR_WAKEUP_FLAG_ALL))
#else
#define IS_PWR_WAKEUP_FLAG(FLAG) (((FLAG) == PWR_WAKEUP_FLAG1) ||\
((FLAG) == PWR_WAKEUP_FLAG2) ||\
((FLAG) == PWR_WAKEUP_FLAG4) ||\
((FLAG) == PWR_WAKEUP_FLAG6) ||\
((FLAG) == PWR_WAKEUP_FLAG_ALL))
#endif /* defined (PWR_WKUPEPR_WKUPEN3) */
/* Check wake up flag parameter */
#define IS_PWR_AVD_LEVEL(LEVEL) (((LEVEL) == PWR_AVDLEVEL_0) ||\
((LEVEL) == PWR_AVDLEVEL_1) ||\
((LEVEL) == PWR_AVDLEVEL_2) ||\
((LEVEL) == PWR_AVDLEVEL_3))
/* Check AVD mode parameter */
#define IS_PWR_AVD_MODE(MODE) (((MODE) == PWR_AVD_MODE_IT_RISING) ||\
((MODE) == PWR_AVD_MODE_IT_FALLING) ||\
((MODE) == PWR_AVD_MODE_IT_RISING_FALLING) ||\
((MODE) == PWR_AVD_MODE_EVENT_RISING) ||\
((MODE) == PWR_AVD_MODE_EVENT_FALLING) ||\
((MODE) == PWR_AVD_MODE_NORMAL) ||\
((MODE) == PWR_AVD_MODE_EVENT_RISING_FALLING))
/* Check resistor battery parameter */
#define IS_PWR_BATTERY_RESISTOR_SELECT(RESISTOR) (((RESISTOR) == PWR_BATTERY_CHARGING_RESISTOR_5) ||\
((RESISTOR) == PWR_BATTERY_CHARGING_RESISTOR_1_5))
/* Check D1/CD CPU ID parameter */
#define IS_PWR_D1_CPU(CPU) ((CPU) == CM7_CPUID)
#if defined (DUAL_CORE)
/* Check CPU parameter */
#define IS_PWR_CORE(CPU) (((CPU) == PWR_CORE_CPU1) || ((CPU) == PWR_CORE_CPU2))
/* Check D2 CPU ID parameter */
#define IS_PWR_D2_CPU(CPU) ((CPU) == CM4_CPUID)
/* Check PWR domain flag parameter */
#define IS_PWR_DOMAIN_FLAG(FLAG) (((FLAG) == PWR_D1_DOMAIN_FLAGS) || \
((FLAG) == PWR_D2_DOMAIN_FLAGS) || \
((FLAG) == PWR_ALL_DOMAIN_FLAGS))
#endif /* defined (DUAL_CORE) */
#if defined (PWR_CR1_SRDRAMSO)
/* Check memory block parameter */
#define IS_PWR_MEMORY_BLOCK(BLOCK) (((BLOCK) == PWR_SRD_AHB_MEMORY_BLOCK) || \
((BLOCK) == PWR_USB_FDCAN_MEMORY_BLOCK) || \
((BLOCK) == PWR_GFXMMU_JPEG_MEMORY_BLOCK) || \
((BLOCK) == PWR_TCM_ECM_MEMORY_BLOCK) || \
((BLOCK) == PWR_RAM1_AHB_MEMORY_BLOCK) || \
((BLOCK) == PWR_RAM2_AHB_MEMORY_BLOCK) || \
((BLOCK) == PWR_RAM1_AXI_MEMORY_BLOCK) || \
((BLOCK) == PWR_RAM2_AXI_MEMORY_BLOCK) || \
((BLOCK) == PWR_RAM3_AXI_MEMORY_BLOCK))
#endif /* defined (PWR_CR1_SRDRAMSO) */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif /* __cplusplus */
#endif /* STM32H7xx_HAL_PWR_EX_H */