steering-wheel/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rtc_ex.c

2883 lines
85 KiB
C

/**
******************************************************************************
* @file stm32h7xx_hal_rtc_ex.c
* @author MCD Application Team
* @brief Extended RTC HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the Real Time Clock (RTC) Extended peripheral:
* + RTC Time Stamp functions
* + RTC Tamper functions
* + RTC Wake-up functions
* + Extended Control functions
* + Extended RTC features functions
*
******************************************************************************
* @attention
*
* Copyright (c) 2017 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
@verbatim
==============================================================================
##### How to use this driver #####
==============================================================================
[..]
(+) Enable the RTC domain access.
(+) Configure the RTC Prescaler (Asynchronous and Synchronous) and RTC hour
format using the HAL_RTC_Init() function.
*** RTC Wakeup configuration ***
================================
[..]
(+) To configure the RTC Wakeup Clock source and Counter use the HAL_RTCEx_SetWakeUpTimer()
function. You can also configure the RTC Wakeup timer with interrupt mode
using the HAL_RTCEx_SetWakeUpTimer_IT() function.
(+) To read the RTC WakeUp Counter register, use the HAL_RTCEx_GetWakeUpTimer()
function.
*** Outputs configuration ***
=============================
[..] The RTC has 2 different outputs:
(+) RTC_ALARM: this output is used to manage the RTC Alarm A, Alarm B
and WaKeUp signals.
To output the selected RTC signal, use the HAL_RTC_Init() function.
(+) RTC_CALIB: this output is 512Hz signal or 1Hz.
To enable the RTC_CALIB, use the HAL_RTCEx_SetCalibrationOutPut() function.
(+) Two pins can be used as RTC_ALARM or RTC_CALIB (PC13, PB2) managed on
the RTC_OR register.
(+) When the RTC_CALIB or RTC_ALARM output is selected, the RTC_OUT pin is
automatically configured in output alternate function.
*** Smooth digital Calibration configuration ***
================================================
[..]
(+) Configure the RTC Original Digital Calibration Value and the corresponding
calibration cycle period (32s,16s and 8s) using the HAL_RTCEx_SetSmoothCalib()
function.
*** TimeStamp configuration ***
===============================
[..]
(+) Enable the RTC TimeStamp using the HAL_RTCEx_SetTimeStamp() function.
You can also configure the RTC TimeStamp with interrupt mode using the
HAL_RTCEx_SetTimeStamp_IT() function.
(+) To read the RTC TimeStamp Time and Date register, use the HAL_RTCEx_GetTimeStamp()
function.
*** Internal TimeStamp configuration ***
===============================
[..]
(+) Enable the RTC internal TimeStamp using the HAL_RTCEx_SetInternalTimeStamp() function.
User has to check internal timestamp occurrence using __HAL_RTC_INTERNAL_TIMESTAMP_GET_FLAG.
(+) To read the RTC TimeStamp Time and Date register, use the HAL_RTCEx_GetTimeStamp()
function.
*** Tamper configuration ***
============================
[..]
(+) Enable the RTC Tamper and configure the Tamper filter count, trigger Edge
or Level according to the Tamper filter (if equal to 0 Edge else Level)
value, sampling frequency, NoErase, MaskFlag, precharge or discharge and
Pull-UP using the HAL_RTCEx_SetTamper() function. You can configure RTC Tamper
with interrupt mode using HAL_RTCEx_SetTamper_IT() function.
(+) The default configuration of the Tamper erases the backup registers. To avoid
erase, enable the NoErase field on the RTC_TAMPCR register.
*** Backup Data Registers configuration ***
===========================================
[..]
(+) To write to the RTC Backup Data registers, use the HAL_RTCEx_BKUPWrite()
function.
(+) To read the RTC Backup Data registers, use the HAL_RTCEx_BKUPRead()
function.
@endverbatim
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal.h"
/** @addtogroup STM32H7xx_HAL_Driver
* @{
*/
/** @addtogroup RTCEx
* @brief RTC Extended HAL module driver
* @{
*/
#ifdef HAL_RTC_MODULE_ENABLED
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
#define TAMP_ALL (TAMP_CR1_TAMP1E | TAMP_CR1_TAMP2E | TAMP_CR1_TAMP3E)
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup RTCEx_Exported_Functions
* @{
*/
/** @addtogroup RTCEx_Exported_Functions_Group1
* @brief RTC TimeStamp and Tamper functions
*
@verbatim
===============================================================================
##### RTC TimeStamp and Tamper functions #####
===============================================================================
[..] This section provides functions allowing to configure TimeStamp feature
@endverbatim
* @{
*/
/**
* @brief Set TimeStamp.
* @note This API must be called before enabling the TimeStamp feature.
* @param hrtc RTC handle
* @param TimeStampEdge Specifies the pin edge on which the TimeStamp is
* activated.
* This parameter can be one of the following values:
* @arg RTC_TIMESTAMPEDGE_RISING: the Time stamp event occurs on the
* rising edge of the related pin.
* @arg RTC_TIMESTAMPEDGE_FALLING: the Time stamp event occurs on the
* falling edge of the related pin.
* @param RTC_TimeStampPin specifies the RTC TimeStamp Pin.
* This parameter can be one of the following values:
* @arg RTC_TIMESTAMPPIN_DEFAULT: PC13 is selected as RTC TimeStamp Pin.
* The RTC TimeStamp Pin is per default PC13, but for reasons of
* compatibility, this parameter is required.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin)
{
uint32_t tmpreg;
/* Check the parameters */
assert_param(IS_TIMESTAMP_EDGE(TimeStampEdge));
assert_param(IS_RTC_TIMESTAMP_PIN(RTC_TimeStampPin));
/* Prevent unused argument(s) compilation warning if no assert_param check */
UNUSED(RTC_TimeStampPin);
/* Process Locked */
__HAL_LOCK(hrtc);
hrtc->State = HAL_RTC_STATE_BUSY;
/* Get the RTC_CR register and clear the bits to be configured */
tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE));
tmpreg |= TimeStampEdge;
/* Disable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
/* Configure the Time Stamp TSEDGE and Enable bits */
hrtc->Instance->CR = (uint32_t)tmpreg;
__HAL_RTC_TIMESTAMP_ENABLE(hrtc);
/* Enable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
/* Change RTC state */
hrtc->State = HAL_RTC_STATE_READY;
/* Process Unlocked */
__HAL_UNLOCK(hrtc);
return HAL_OK;
}
/**
* @brief Set TimeStamp with Interrupt.
* @note This API must be called before enabling the TimeStamp feature.
* @param hrtc RTC handle
* @param TimeStampEdge Specifies the pin edge on which the TimeStamp is
* activated.
* This parameter can be one of the following values:
* @arg RTC_TIMESTAMPEDGE_RISING: the Time stamp event occurs on the
* rising edge of the related pin.
* @arg RTC_TIMESTAMPEDGE_FALLING: the Time stamp event occurs on the
* falling edge of the related pin.
* @param RTC_TimeStampPin Specifies the RTC TimeStamp Pin.
* This parameter can be one of the following values:
* @arg RTC_TIMESTAMPPIN_DEFAULT: PC13 is selected as RTC TimeStamp Pin.
* The RTC TimeStamp Pin is per default PC13, but for reasons of
* compatibility, this parameter is required.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin)
{
uint32_t tmpreg;
/* Check the parameters */
assert_param(IS_TIMESTAMP_EDGE(TimeStampEdge));
assert_param(IS_RTC_TIMESTAMP_PIN(RTC_TimeStampPin));
/* Prevent unused argument(s) compilation warning if no assert_param check */
UNUSED(RTC_TimeStampPin);
/* Process Locked */
__HAL_LOCK(hrtc);
hrtc->State = HAL_RTC_STATE_BUSY;
/* Get the RTC_CR register and clear the bits to be configured */
tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE));
tmpreg |= TimeStampEdge;
/* Disable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
/* Configure the Time Stamp TSEDGE and Enable bits */
hrtc->Instance->CR = (uint32_t)tmpreg;
__HAL_RTC_TIMESTAMP_ENABLE(hrtc);
/* Enable IT timestamp */
__HAL_RTC_TIMESTAMP_ENABLE_IT(hrtc, RTC_IT_TS);
/* RTC timestamp Interrupt Configuration: EXTI configuration */
#if defined(DUAL_CORE)
if (HAL_GetCurrentCPUID() == CM7_CPUID)
{
__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT();
}
else
{
__HAL_RTC_TAMPER_TIMESTAMP_EXTID2_ENABLE_IT();
}
#else /* SINGLE_CORE */
__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT();
#endif /* DUAL_CORE */
__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();
/* Enable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
hrtc->State = HAL_RTC_STATE_READY;
/* Process Unlocked */
__HAL_UNLOCK(hrtc);
return HAL_OK;
}
/**
* @brief Deactivate TimeStamp.
* @param hrtc RTC handle
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc)
{
uint32_t tmpreg;
/* Process Locked */
__HAL_LOCK(hrtc);
hrtc->State = HAL_RTC_STATE_BUSY;
/* Disable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
/* In case of interrupt mode is used, the interrupt source must disabled */
__HAL_RTC_TIMESTAMP_DISABLE_IT(hrtc, RTC_IT_TS);
/* Get the RTC_CR register and clear the bits to be configured */
tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE));
/* Configure the Time Stamp TSEDGE and Enable bits */
hrtc->Instance->CR = (uint32_t)tmpreg;
/* Enable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
hrtc->State = HAL_RTC_STATE_READY;
/* Process Unlocked */
__HAL_UNLOCK(hrtc);
return HAL_OK;
}
/**
* @brief Set Internal TimeStamp.
* @note This API must be called before enabling the internal TimeStamp feature.
* @param hrtc RTC handle
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RTCEx_SetInternalTimeStamp(RTC_HandleTypeDef *hrtc)
{
/* Process Locked */
__HAL_LOCK(hrtc);
hrtc->State = HAL_RTC_STATE_BUSY;
/* Disable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
/* Configure the internal Time Stamp Enable bits */
__HAL_RTC_INTERNAL_TIMESTAMP_ENABLE(hrtc);
/* Enable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
/* Change RTC state */
hrtc->State = HAL_RTC_STATE_READY;
/* Process Unlocked */
__HAL_UNLOCK(hrtc);
return HAL_OK;
}
/**
* @brief Deactivate Internal TimeStamp.
* @param hrtc RTC handle
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RTCEx_DeactivateInternalTimeStamp(RTC_HandleTypeDef *hrtc)
{
/* Process Locked */
__HAL_LOCK(hrtc);
hrtc->State = HAL_RTC_STATE_BUSY;
/* Disable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
/* Configure the internal Time Stamp Enable bits */
__HAL_RTC_INTERNAL_TIMESTAMP_DISABLE(hrtc);
/* Enable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
hrtc->State = HAL_RTC_STATE_READY;
/* Process Unlocked */
__HAL_UNLOCK(hrtc);
return HAL_OK;
}
/**
* @brief Get the RTC TimeStamp value.
* @param hrtc RTC handle
* @param sTimeStamp Pointer to Time structure
* @param sTimeStampDate Pointer to Date structure
* @param Format specifies the format of the entered parameters.
* This parameter can be one of the following values:
* @arg RTC_FORMAT_BIN: Binary data format
* @arg RTC_FORMAT_BCD: BCD data format
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format)
{
uint32_t tmptime;
uint32_t tmpdate;
/* Check the parameters */
assert_param(IS_RTC_FORMAT(Format));
/* Get the TimeStamp time and date registers values */
tmptime = (uint32_t)(hrtc->Instance->TSTR & RTC_TR_RESERVED_MASK);
tmpdate = (uint32_t)(hrtc->Instance->TSDR & RTC_DR_RESERVED_MASK);
/* Fill the Time structure fields with the read parameters */
sTimeStamp->Hours = (uint8_t)((tmptime & (RTC_TSTR_HT | RTC_TSTR_HU)) >> RTC_TSTR_HU_Pos);
sTimeStamp->Minutes = (uint8_t)((tmptime & (RTC_TSTR_MNT | RTC_TSTR_MNU)) >> RTC_TSTR_MNU_Pos);
sTimeStamp->Seconds = (uint8_t)((tmptime & (RTC_TSTR_ST | RTC_TSTR_SU)) >> RTC_TSTR_SU_Pos);
sTimeStamp->TimeFormat = (uint8_t)((tmptime & (RTC_TSTR_PM)) >> RTC_TSTR_PM_Pos);
sTimeStamp->SubSeconds = (uint32_t) hrtc->Instance->TSSSR;
/* Fill the Date structure fields with the read parameters */
sTimeStampDate->Year = 0U;
sTimeStampDate->Month = (uint8_t)((tmpdate & (RTC_TSDR_MT | RTC_TSDR_MU)) >> RTC_TSDR_MU_Pos);
sTimeStampDate->Date = (uint8_t)((tmpdate & (RTC_TSDR_DT | RTC_TSDR_DU)) >> RTC_TSDR_DU_Pos);
sTimeStampDate->WeekDay = (uint8_t)((tmpdate & (RTC_TSDR_WDU)) >> RTC_TSDR_WDU_Pos);
/* Check the input parameters format */
if (Format == RTC_FORMAT_BIN)
{
/* Convert the TimeStamp structure parameters to Binary format */
sTimeStamp->Hours = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Hours);
sTimeStamp->Minutes = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Minutes);
sTimeStamp->Seconds = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Seconds);
/* Convert the DateTimeStamp structure parameters to Binary format */
sTimeStampDate->Month = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Month);
sTimeStampDate->Date = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Date);
sTimeStampDate->WeekDay = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->WeekDay);
}
/* Clear the TIMESTAMP Flags */
__HAL_RTC_INTERNAL_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_ITSF);
__HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSF);
return HAL_OK;
}
/**
* @}
*/
/** @addtogroup RTCEx_Exported_Functions_Group5
* @brief Extended RTC Tamper functions
*
@verbatim
==============================================================================
##### Tamper functions #####
==============================================================================
[..]
(+) Before calling any tamper or internal tamper function, you have to call first
HAL_RTC_Init() function.
(+) In that ine you can select to output tamper event on RTC pin.
[..]
(+) Enable the Tamper and configure the Tamper filter count, trigger Edge
or Level according to the Tamper filter (if equal to 0 Edge else Level)
value, sampling frequency, NoErase, MaskFlag, precharge or discharge and
Pull-UP, timestamp using the HAL_RTCEx_SetTamper() function.
You can configure Tamper with interrupt mode using HAL_RTCEx_SetTamper_IT() function.
(+) The default configuration of the Tamper erases the backup registers. To avoid
erase, enable the NoErase field on the TAMP_TAMPCR register.
[..]
(+) Enable Internal Tamper and configure it with interrupt, timestamp using
the HAL_RTCEx_SetInternalTamper() function.
@endverbatim
* @{
*/
#if defined(TAMP)
/**
* @brief Set Tamper
* @param hrtc RTC handle
* @param sTamper Pointer to Tamper Structure.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef * hrtc, RTC_TamperTypeDef * sTamper)
{
uint32_t tmpreg;
/* Point on TAMPER registers base address */
TAMP_TypeDef *tamp = (TAMP_TypeDef *)((uint32_t)hrtc->Instance + TAMP_OFFSET);
/* Check the parameters */
assert_param(IS_RTC_TAMPER(sTamper->Tamper));
assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger));
assert_param(IS_RTC_TAMPER_ERASE_MODE(sTamper->NoErase));
assert_param(IS_RTC_TAMPER_MASKFLAG_STATE(sTamper->MaskFlag));
assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection));
assert_param(IS_RTC_TAMPER_FILTER(sTamper->Filter));
assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency));
assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration));
assert_param(IS_RTC_TAMPER_PULLUP_STATE(sTamper->TamperPullUp));
assert_param(IS_RTC_TAMPER_FILTER_CONFIG_CORRECT(sTamper->Filter, sTamper->Trigger));
/* Configuration register 2 */
tmpreg = tamp->CR2;
tmpreg &= ~((sTamper->Tamper << TAMP_CR2_TAMP1TRG_Pos) | (sTamper->Tamper << TAMP_CR2_TAMP1MSK_Pos) | (sTamper->Tamper << TAMP_CR2_TAMP1NOERASE_Pos));
/* Configure the tamper trigger bit */
if ((sTamper->Trigger == RTC_TAMPERTRIGGER_HIGHLEVEL) || (sTamper->Trigger == RTC_TAMPERTRIGGER_FALLINGEDGE))
{
tmpreg |= (sTamper->Tamper << TAMP_CR2_TAMP1TRG_Pos);
}
/* Configure the tamper flags masking bit */
if (sTamper->MaskFlag != RTC_TAMPERMASK_FLAG_DISABLE)
{
tmpreg |= (sTamper->Tamper << TAMP_CR2_TAMP1MSK_Pos);
}
/* Configure the tamper backup registers erasure bit */
if (sTamper->NoErase != RTC_TAMPER_ERASE_BACKUP_ENABLE)
{
tmpreg |= (sTamper->Tamper << TAMP_CR2_TAMP1NOERASE_Pos);
}
tamp->CR2 = tmpreg;
/* Configure filtering parameters */
tamp->FLTCR = (sTamper->Filter) | (sTamper->SamplingFrequency) | \
(sTamper->PrechargeDuration) | (sTamper->TamperPullUp);
/* Configure Timestamp saving on tamper detection */
if ((hrtc->Instance->CR & RTC_CR_TAMPTS) != (sTamper->TimeStampOnTamperDetection))
{
__HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
tmpreg = (hrtc->Instance->CR & ~RTC_CR_TAMPTS);
hrtc->Instance->CR = (tmpreg | (sTamper->TimeStampOnTamperDetection));
__HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
}
/* Enable selected tamper */
tamp->CR1 |= (sTamper->Tamper);
return HAL_OK;
}
#else
/**
* @brief Set Tamper.
* @note By calling this API we disable the tamper interrupt for all tampers.
* @param hrtc RTC handle
* @param sTamper Pointer to Tamper Structure.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef * hrtc, RTC_TamperTypeDef * sTamper)
{
uint32_t tmpreg;
/* Check the parameters */
assert_param(IS_RTC_TAMPER(sTamper->Tamper));
assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger));
assert_param(IS_RTC_TAMPER_ERASE_MODE(sTamper->NoErase));
assert_param(IS_RTC_TAMPER_MASKFLAG_STATE(sTamper->MaskFlag));
assert_param(IS_RTC_TAMPER_FILTER(sTamper->Filter));
assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency));
assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration));
assert_param(IS_RTC_TAMPER_PULLUP_STATE(sTamper->TamperPullUp));
assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection));
assert_param(IS_RTC_TAMPER_FILTER_CONFIG_CORRECT(sTamper->Filter, sTamper->Trigger));
/* Process Locked */
__HAL_LOCK(hrtc);
hrtc->State = HAL_RTC_STATE_BUSY;
/* Copy control register into temporary variable */
tmpreg = hrtc->Instance->TAMPCR;
/* Enable selected tamper */
tmpreg |= (sTamper->Tamper);
/* Configure the bit (located just next to the tamper enable bit) */
if ((sTamper->Trigger == RTC_TAMPERTRIGGER_HIGHLEVEL) || (sTamper->Trigger == RTC_TAMPERTRIGGER_FALLINGEDGE))
{
/* Set the tamper trigger bit */
tmpreg |= (uint32_t)(sTamper->Tamper << 1U);
}
else
{
/* Clear the tamper trigger bit */
tmpreg &= (uint32_t)~(sTamper->Tamper << 1U);
}
/* Configure the tamper backup registers erasure bit */
if (sTamper->NoErase != RTC_TAMPER_ERASE_BACKUP_ENABLE)
{
if ((sTamper->Tamper & RTC_TAMPER_1) != 0U)
{
tmpreg |= (uint32_t)(RTC_TAMPCR_TAMP1NOERASE);
}
if ((sTamper->Tamper & RTC_TAMPER_2) != 0U)
{
tmpreg |= (uint32_t)(RTC_TAMPCR_TAMP2NOERASE);
}
if ((sTamper->Tamper & RTC_TAMPER_3) != 0U)
{
tmpreg |= (uint32_t)(RTC_TAMPCR_TAMP3NOERASE);
}
}
else
{
if ((sTamper->Tamper & RTC_TAMPER_1) != 0U)
{
tmpreg &= (uint32_t)~(RTC_TAMPCR_TAMP1NOERASE);
}
if ((sTamper->Tamper & RTC_TAMPER_2) != 0U)
{
tmpreg &= (uint32_t)~(RTC_TAMPCR_TAMP2NOERASE);
}
if ((sTamper->Tamper & RTC_TAMPER_3) != 0U)
{
tmpreg &= (uint32_t)~(RTC_TAMPCR_TAMP3NOERASE);
}
}
/* Configure the tamper flags masking bit */
if (sTamper->MaskFlag != RTC_TAMPERMASK_FLAG_DISABLE)
{
if ((sTamper->Tamper & RTC_TAMPER_1) != 0U)
{
tmpreg |= (uint32_t)(RTC_TAMPCR_TAMP1MF);
}
if ((sTamper->Tamper & RTC_TAMPER_2) != 0U)
{
tmpreg |= (uint32_t)(RTC_TAMPCR_TAMP2MF);
}
if ((sTamper->Tamper & RTC_TAMPER_3) != 0U)
{
tmpreg |= (uint32_t)(RTC_TAMPCR_TAMP3MF);
}
}
else
{
if ((sTamper->Tamper & RTC_TAMPER_1) != 0U)
{
tmpreg &= (uint32_t)~(RTC_TAMPCR_TAMP1MF);
}
if ((sTamper->Tamper & RTC_TAMPER_2) != 0U)
{
tmpreg &= (uint32_t)~(RTC_TAMPCR_TAMP2MF);
}
if ((sTamper->Tamper & RTC_TAMPER_3) != 0U)
{
tmpreg &= (uint32_t)~(RTC_TAMPCR_TAMP3MF);
}
}
/* Clearing remaining fields before setting them */
tmpreg &= ~(RTC_TAMPERFILTER_MASK | RTC_TAMPERSAMPLINGFREQ_RTCCLK_MASK | \
RTC_TAMPERPRECHARGEDURATION_MASK | RTC_TAMPER_PULLUP_MASK | \
RTC_TIMESTAMPONTAMPERDETECTION_MASK);
/* Set remaining parameters of desired configuration into temporary variable */
tmpreg |= ((uint32_t)sTamper->Filter | \
(uint32_t)sTamper->SamplingFrequency | \
(uint32_t)sTamper->PrechargeDuration | \
(uint32_t)sTamper->TamperPullUp | \
(uint32_t)sTamper->TimeStampOnTamperDetection);
/* Copy desired configuration into configuration register */
hrtc->Instance->TAMPCR = tmpreg;
hrtc->State = HAL_RTC_STATE_READY;
/* Process Unlocked */
__HAL_UNLOCK(hrtc);
return HAL_OK;
}
#endif /* TAMP */
#if defined(TAMP)
/**
* @brief Set Tamper with interrupt.
* @param hrtc RTC handle
* @param sTamper Pointer to Tamper Structure.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef * hrtc, RTC_TamperTypeDef * sTamper)
{
uint32_t tmpreg;
/* Point on TAMPER registers base address */
TAMP_TypeDef *tamp = (TAMP_TypeDef *)((uint32_t)hrtc->Instance + TAMP_OFFSET);
/* Check the parameters */
assert_param(IS_RTC_TAMPER(sTamper->Tamper));
assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger));
assert_param(IS_RTC_TAMPER_ERASE_MODE(sTamper->NoErase));
assert_param(IS_RTC_TAMPER_MASKFLAG_STATE(sTamper->MaskFlag));
assert_param(IS_RTC_TAMPER_FILTER(sTamper->Filter));
assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency));
assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration));
assert_param(IS_RTC_TAMPER_PULLUP_STATE(sTamper->TamperPullUp));
assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection));
assert_param(IS_RTC_TAMPER_FILTER_CONFIG_CORRECT(sTamper->Filter, sTamper->Trigger));
/* Copy configuration register into temporary variable */
tmpreg = tamp->CR2;
/* Clear the bits that are going to be configured and leave the others unchanged */
tmpreg &= ~((sTamper->Tamper << TAMP_CR2_TAMP1TRG_Pos) | (sTamper->Tamper << TAMP_CR2_TAMP1MSK_Pos) | (sTamper->Tamper << TAMP_CR2_TAMP1NOERASE_Pos));
/* Configure the tamper trigger bit */
if ((sTamper->Trigger == RTC_TAMPERTRIGGER_HIGHLEVEL) || (sTamper->Trigger == RTC_TAMPERTRIGGER_FALLINGEDGE))
{
tmpreg |= (sTamper->Tamper << TAMP_CR2_TAMP1TRG_Pos);
}
/* Configure the tamper flags masking bit */
if (sTamper->MaskFlag != RTC_TAMPERMASK_FLAG_DISABLE)
{
tmpreg |= (sTamper->Tamper << TAMP_CR2_TAMP1MSK_Pos);
}
/* Configure the tamper backup registers erasure bit */
if (sTamper->NoErase != RTC_TAMPER_ERASE_BACKUP_ENABLE)
{
tmpreg |= (sTamper->Tamper << TAMP_CR2_TAMP1NOERASE_Pos);
}
tamp->CR2 = tmpreg;
/* Configure filtering parameters */
tamp->FLTCR = (sTamper->Filter) | (sTamper->SamplingFrequency) | \
(sTamper->PrechargeDuration) | (sTamper->TamperPullUp);
/* Configure Timestamp saving on tamper detection */
if ((hrtc->Instance->CR & RTC_CR_TAMPTS) != (sTamper->TimeStampOnTamperDetection))
{
__HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
tmpreg = (hrtc->Instance->CR & ~RTC_CR_TAMPTS);
hrtc->Instance->CR = (tmpreg | (sTamper->TimeStampOnTamperDetection));
__HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
}
/* Configure RTC Tamper Interrupt: EXTI configuration */
__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT();
__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE();
/* Enable interrupt on selected tamper */
tamp->IER |= sTamper->Tamper;
/* Enable selected tamper */
tamp->CR1 |= sTamper->Tamper;
return HAL_OK;
}
#else
/**
* @brief Set Tamper with interrupt.
* @note By calling this API we force the tamper interrupt for all tampers.
* @param hrtc RTC handle
* @param sTamper Pointer to Tamper Structure.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef * hrtc, RTC_TamperTypeDef * sTamper)
{
uint32_t tmpreg;
/* Check the parameters */
assert_param(IS_RTC_TAMPER(sTamper->Tamper));
assert_param(IS_RTC_TAMPER_INTERRUPT(sTamper->Interrupt));
assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger));
assert_param(IS_RTC_TAMPER_ERASE_MODE(sTamper->NoErase));
assert_param(IS_RTC_TAMPER_MASKFLAG_STATE(sTamper->MaskFlag));
assert_param(IS_RTC_TAMPER_FILTER(sTamper->Filter));
assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency));
assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration));
assert_param(IS_RTC_TAMPER_PULLUP_STATE(sTamper->TamperPullUp));
assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection));
assert_param(IS_RTC_TAMPER_FILTER_CONFIG_CORRECT(sTamper->Filter, sTamper->Trigger));
/* Process Locked */
__HAL_LOCK(hrtc);
hrtc->State = HAL_RTC_STATE_BUSY;
/* Copy control register into temporary variable */
tmpreg = hrtc->Instance->TAMPCR;
/* Enable selected tamper */
tmpreg |= (sTamper->Tamper);
/* Configure the tamper trigger bit (located just next to the tamper enable bit) */
if ((sTamper->Trigger == RTC_TAMPERTRIGGER_HIGHLEVEL) || (sTamper->Trigger == RTC_TAMPERTRIGGER_FALLINGEDGE))
{
/* Set the tamper trigger bit */
tmpreg |= (uint32_t)(sTamper->Tamper << 1U);
}
else
{
/* Clear the tamper trigger bit */
tmpreg &= (uint32_t)~(sTamper->Tamper << 1U);
}
/* Configure the tamper backup registers erasure bit */
if (sTamper->NoErase != RTC_TAMPER_ERASE_BACKUP_ENABLE)
{
if ((sTamper->Tamper & RTC_TAMPER_1) != 0U)
{
tmpreg |= (uint32_t)(RTC_TAMPCR_TAMP1NOERASE);
}
if ((sTamper->Tamper & RTC_TAMPER_2) != 0U)
{
tmpreg |= (uint32_t)(RTC_TAMPCR_TAMP2NOERASE);
}
if ((sTamper->Tamper & RTC_TAMPER_3) != 0U)
{
tmpreg |= (uint32_t)(RTC_TAMPCR_TAMP3NOERASE);
}
}
else
{
if ((sTamper->Tamper & RTC_TAMPER_1) != 0U)
{
tmpreg &= (uint32_t)~(RTC_TAMPCR_TAMP1NOERASE);
}
if ((sTamper->Tamper & RTC_TAMPER_2) != 0U)
{
tmpreg &= (uint32_t)~(RTC_TAMPCR_TAMP2NOERASE);
}
if ((sTamper->Tamper & RTC_TAMPER_3) != 0U)
{
tmpreg &= (uint32_t)~(RTC_TAMPCR_TAMP3NOERASE);
}
}
/* Configure the tamper flags masking bit */
if (sTamper->MaskFlag != RTC_TAMPERMASK_FLAG_DISABLE)
{
if ((sTamper->Tamper & RTC_TAMPER_1) != 0U)
{
tmpreg |= (uint32_t)(RTC_TAMPCR_TAMP1MF);
}
if ((sTamper->Tamper & RTC_TAMPER_2) != 0U)
{
tmpreg |= (uint32_t)(RTC_TAMPCR_TAMP2MF);
}
if ((sTamper->Tamper & RTC_TAMPER_3) != 0U)
{
tmpreg |= (uint32_t)(RTC_TAMPCR_TAMP3MF);
}
}
else
{
if ((sTamper->Tamper & RTC_TAMPER_1) != 0U)
{
tmpreg &= (uint32_t)~(RTC_TAMPCR_TAMP1MF);
}
if ((sTamper->Tamper & RTC_TAMPER_2) != 0U)
{
tmpreg &= (uint32_t)~(RTC_TAMPCR_TAMP2MF);
}
if ((sTamper->Tamper & RTC_TAMPER_3) != 0U)
{
tmpreg &= (uint32_t)~(RTC_TAMPCR_TAMP3MF);
}
}
/* Clearing remaining fields before setting them */
tmpreg &= ~(RTC_TAMPERFILTER_MASK | RTC_TAMPERSAMPLINGFREQ_RTCCLK_MASK | \
RTC_TAMPERPRECHARGEDURATION_MASK | RTC_TAMPER_PULLUP_MASK | \
RTC_TIMESTAMPONTAMPERDETECTION_MASK);
/* Set remaining parameters of desired configuration into temporary variable */
tmpreg |= ((uint32_t)sTamper->Filter | \
(uint32_t)sTamper->SamplingFrequency | \
(uint32_t)sTamper->PrechargeDuration | \
(uint32_t)sTamper->TamperPullUp | \
(uint32_t)sTamper->TimeStampOnTamperDetection);
/* Enable interrupt on selected tamper */
tmpreg |= (uint32_t)sTamper->Interrupt;
/* Copy desired configuration into configuration register */
hrtc->Instance->TAMPCR = tmpreg;
/* RTC Tamper Interrupt Configuration: EXTI configuration */
#if defined(DUAL_CORE)
if (HAL_GetCurrentCPUID() == CM7_CPUID)
{
__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT();
}
else
{
__HAL_RTC_TAMPER_TIMESTAMP_EXTID2_ENABLE_IT();
}
#else /* SINGLE_CORE */
__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT();
#endif /* DUAL_CORE */
__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();
hrtc->State = HAL_RTC_STATE_READY;
/* Process Unlocked */
__HAL_UNLOCK(hrtc);
return HAL_OK;
}
#endif /* TAMP */
#if defined(TAMP)
/**
* @brief Deactivate Tamper.
* @param hrtc RTC handle
* @param Tamper Selected tamper pin.
* This parameter can be a combination of the following values:
* @arg RTC_TAMPER_1
* @arg RTC_TAMPER_2
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef * hrtc, uint32_t Tamper)
{
/* Point on TAMPER registers base address */
TAMP_TypeDef *tamp = (TAMP_TypeDef *)((uint32_t)hrtc->Instance + TAMP_OFFSET);
assert_param(IS_RTC_TAMPER(Tamper));
/* Disable the selected Tamper pin */
tamp->CR1 &= ~Tamper;
/* Disable the selected Tamper interrupt */
tamp->IER &= ~Tamper;
/* Clear the selected tamper flags in SR register by setting corresponding bits in SCR register */
tamp->SCR = Tamper;
/* Clear the selected tamper configuration (trigger, mask flag, and no-erase) */
tamp->CR2 &= ~((Tamper << TAMP_CR2_TAMP1TRG_Pos) | (Tamper << TAMP_CR2_TAMP1MSK_Pos) | (Tamper << TAMP_CR2_TAMP1NOERASE_Pos));
return HAL_OK;
}
#else
/**
* @brief Deactivate Tamper.
* @param hrtc RTC handle
* @param Tamper Selected tamper pin.
* This parameter can be any combination of the following values:
* @arg RTC_TAMPER_1
* @arg RTC_TAMPER_2
* @arg RTC_TAMPER_3
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef * hrtc, uint32_t Tamper)
{
assert_param(IS_RTC_TAMPER(Tamper));
/* Process Locked */
__HAL_LOCK(hrtc);
hrtc->State = HAL_RTC_STATE_BUSY;
/* Disable the selected Tamper pin */
hrtc->Instance->TAMPCR &= ((uint32_t)~Tamper);
/* Disable the selected Tamper interrupt */
if ((Tamper & RTC_TAMPER_1) != 0U)
{
hrtc->Instance->TAMPCR &= ((uint32_t)~(RTC_IT_TAMP | RTC_IT_TAMP1));
}
if ((Tamper & RTC_TAMPER_2) != 0U)
{
hrtc->Instance->TAMPCR &= ((uint32_t)~(RTC_IT_TAMP | RTC_IT_TAMP2));
}
if ((Tamper & RTC_TAMPER_3) != 0U)
{
hrtc->Instance->TAMPCR &= ((uint32_t)~(RTC_IT_TAMP | RTC_IT_TAMP3));
}
hrtc->State = HAL_RTC_STATE_READY;
/* Process Unlocked */
__HAL_UNLOCK(hrtc);
return HAL_OK;
}
#endif /* TAMP */
#if defined(TAMP)
/**
* @brief Set Internal Tamper
* @param hrtc RTC handle
* @param sIntTamper Pointer to Internal Tamper Structure.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RTCEx_SetInternalTamper(RTC_HandleTypeDef *hrtc, RTC_InternalTamperTypeDef *sIntTamper)
{
/* Check the parameters */
assert_param(IS_RTC_INTERNAL_TAMPER(sIntTamper->IntTamper));
assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sIntTamper->TimeStampOnTamperDetection));
/* Time-Stamp on internal tamper */
if (READ_BIT(RTC->CR, RTC_CR_TAMPTS) != sIntTamper->TimeStampOnTamperDetection)
{
__HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
MODIFY_REG(RTC->CR, RTC_CR_TAMPTS, sIntTamper->TimeStampOnTamperDetection);
__HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
}
/* Control register 1 */
SET_BIT(TAMP->CR1, sIntTamper->IntTamper);
return HAL_OK;
}
/**
* @brief Set Internal Tamper in interrupt mode
* @param hrtc RTC handle
* @param sIntTamper Pointer to Internal Tamper Structure.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RTCEx_SetInternalTamper_IT(RTC_HandleTypeDef *hrtc, RTC_InternalTamperTypeDef *sIntTamper)
{
/* Check the parameters */
assert_param(IS_RTC_INTERNAL_TAMPER(sIntTamper->IntTamper));
assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sIntTamper->TimeStampOnTamperDetection));
/* Time-stamp on internal tamper */
if (READ_BIT(RTC->CR, RTC_CR_TAMPTS) != sIntTamper->TimeStampOnTamperDetection)
{
__HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
MODIFY_REG(RTC->CR, RTC_CR_TAMPTS, sIntTamper->TimeStampOnTamperDetection);
__HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
}
/* RTC Tamper Interrupt Configuration: EXTI configuration */
__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT();
__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE();
/* Interrupt enable register */
SET_BIT(TAMP->IER, sIntTamper->IntTamper);
/* Control register 1 */
SET_BIT(TAMP->CR1, sIntTamper->IntTamper);
return HAL_OK;
}
/**
* @brief Deactivate Internal Tamper.
* @param hrtc RTC handle
* @param IntTamper Selected internal tamper event.
* This parameter can be any combination of existing internal tampers.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RTCEx_DeactivateInternalTamper(RTC_HandleTypeDef *hrtc, uint32_t IntTamper)
{
UNUSED(hrtc);
assert_param(IS_RTC_INTERNAL_TAMPER(IntTamper));
/* Disable the selected Tamper pin */
CLEAR_BIT(TAMP->CR1, IntTamper);
/* Clear internal tamper interrupt mode configuration */
CLEAR_BIT(TAMP->IER, IntTamper);
/* Clear internal tamper interrupt */
WRITE_REG(TAMP->SCR, IntTamper);
return HAL_OK;
}
/**
* @brief Set all active Tampers at the same time.
* @param hrtc RTC handle
* @param sAllTamper Pointer to active Tamper Structure.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RTCEx_SetActiveTampers(RTC_HandleTypeDef *hrtc, RTC_ActiveTampersTypeDef *sAllTamper)
{
uint32_t IER, CR1, CR2, ATCR1, CR, i, tickstart;
#ifdef USE_FULL_ASSERT
for (i = 0; i < RTC_TAMP_NB; i++)
{
assert_param(IS_RTC_TAMPER_ERASE_MODE(sAllTamper->TampInput[i].NoErase));
assert_param(IS_RTC_TAMPER_MASKFLAG_STATE(sAllTamper->TampInput[i].MaskFlag));
/* Mask flag only supported by TAMPER 1, 2, and 3 */
assert_param(!((sAllTamper->TampInput[i].MaskFlag != RTC_TAMPERMASK_FLAG_DISABLE) && (i > RTC_TAMPER_3)));
}
assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sAllTamper->TimeStampOnTamperDetection));
#endif /* USE_FULL_ASSERT */
/* Active Tampers must not be already enabled */
if (READ_BIT(TAMP->ATOR, TAMP_ATOR_INITS) != 0U)
{
/* Disable all active tampers with HAL_RTCEx_DeactivateActiveTampers */
if (HAL_RTCEx_DeactivateActiveTampers(hrtc) != HAL_OK)
{
return HAL_ERROR;
}
}
/* Set TimeStamp on tamper detection */
CR = READ_REG(RTC->CR);
if ((CR & RTC_CR_TAMPTS) != (sAllTamper->TimeStampOnTamperDetection))
{
__HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
MODIFY_REG(RTC->CR, RTC_CR_TAMPTS, sAllTamper->TimeStampOnTamperDetection);
__HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
}
CR1 = READ_REG(TAMP->CR1);
CR2 = READ_REG(TAMP->CR2);
IER = READ_REG(TAMP->IER);
/* Set common parameters */
ATCR1 = (sAllTamper->ActiveFilter | (sAllTamper->ActiveOutputChangePeriod << TAMP_ATCR1_ATPER_Pos) | sAllTamper->ActiveAsyncPrescaler);
/* Set specific parameters for each active tamper inputs if enable */
for (i = 0; i < RTC_TAMP_NB; i++)
{
if (sAllTamper->TampInput[i].Enable != RTC_ATAMP_DISABLE)
{
CR1 |= (TAMP_CR1_TAMP1E << i);
ATCR1 |= (TAMP_ATCR1_TAMP1AM << i);
if (sAllTamper->TampInput[i].Interrupt != RTC_ATAMP_INTERRUPT_DISABLE)
{
/* RTC Tamper Interrupt Configuration: EXTI configuration */
__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT();
__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();
/* Interrupt enable register */
IER |= (TAMP_IER_TAMP1IE << i);
}
if (sAllTamper->TampInput[i].MaskFlag != RTC_TAMPERMASK_FLAG_DISABLE)
{
CR2 |= (TAMP_CR2_TAMP1MSK << i);
}
if (sAllTamper->TampInput[i].NoErase != RTC_TAMPER_ERASE_BACKUP_ENABLE)
{
CR2 |= (TAMP_CR2_TAMP1NOERASE << i);
}
/* Set ATOSHARE and configure ATOSELx[] in case of output sharing */
if (sAllTamper->TampInput[i].Output != i)
{
ATCR1 |= TAMP_ATCR1_ATOSHARE;
ATCR1 |= sAllTamper->TampInput[i].Output << ((2u * i) + TAMP_ATCR1_ATOSEL1_Pos);
}
}
}
WRITE_REG(TAMP->IER, IER);
WRITE_REG(TAMP->IER, IER);
WRITE_REG(TAMP->ATCR1, ATCR1);
#if defined(TAMP_ATCR2_ATOSEL1)
WRITE_REG(TAMP->ATCR2, ATCR2);
#endif /* TAMP_ATCR2_ATOSEL1 */
WRITE_REG(TAMP->CR2, CR2);
WRITE_REG(TAMP->CR1, CR1);
/* Write seed */
for (i = 0; i < RTC_ATAMP_SEED_NB_UINT32; i++)
{
WRITE_REG(TAMP->ATSEEDR, sAllTamper->Seed[i]);
}
/* Wait till RTC SEEDF flag is set and if timeout is reached exit */
tickstart = HAL_GetTick();
while (READ_BIT(TAMP->ATOR, TAMP_ATOR_SEEDF) != 0u)
{
if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)
{
hrtc->State = HAL_RTC_STATE_TIMEOUT;
return HAL_TIMEOUT;
}
}
return HAL_OK;
}
/**
* @brief Write a new seed. Active tamper must be enabled.
* @param hrtc RTC handle
* @param pSeed Pointer to active tamper seed values.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RTCEx_SetActiveSeed(RTC_HandleTypeDef *hrtc, uint32_t *pSeed)
{
uint32_t i, tickstart;
/* Active Tampers must be enabled */
if (READ_BIT(TAMP->ATOR, TAMP_ATOR_INITS) == 0U)
{
return HAL_ERROR;
}
for (i = 0; i < RTC_ATAMP_SEED_NB_UINT32; i++)
{
WRITE_REG(TAMP->ATSEEDR, pSeed[i]);
}
/* Wait till RTC SEEDF flag is set and if timeout is reached exit */
tickstart = HAL_GetTick();
while (READ_BIT(TAMP->ATOR, TAMP_ATOR_SEEDF) != 0U)
{
if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)
{
hrtc->State = HAL_RTC_STATE_TIMEOUT;
return HAL_TIMEOUT;
}
}
return HAL_OK;
}
/**
* @brief Deactivate all Active Tampers at the same time.
* @param hrtc RTC handle
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RTCEx_DeactivateActiveTampers(RTC_HandleTypeDef *hrtc)
{
/* Get Active tampers */
uint32_t ATamp_mask = READ_BIT(TAMP->ATCR1, TAMP_ALL);
UNUSED(hrtc);
/* Disable all actives tampers but not passives tampers */
CLEAR_BIT(TAMP->CR1, ATamp_mask);
/* Disable no erase and mask */
CLEAR_BIT(TAMP->CR2, (ATamp_mask | ((ATamp_mask & (TAMP_ATCR1_TAMP1AM | TAMP_ATCR1_TAMP2AM | TAMP_ATCR1_TAMP3AM)) << TAMP_CR2_TAMP1MSK_Pos)));
/* Clear tamper interrupt and event flags (WO register) of all actives tampers but not passives tampers */
WRITE_REG(TAMP->SCR, ATamp_mask);
/* Clear all active tampers interrupt mode configuration but not passives tampers */
CLEAR_BIT(TAMP->IER, ATamp_mask);
CLEAR_BIT(TAMP->ATCR1, TAMP_ALL | TAMP_ATCR1_ATCKSEL | TAMP_ATCR1_ATPER | \
TAMP_ATCR1_ATOSHARE | TAMP_ATCR1_FLTEN);
#if defined(TAMP_ATCR2_ATOSEL1)
CLEAR_BIT(TAMP->ATCR2, TAMP_ATCR2_ATOSEL1 | TAMP_ATCR2_ATOSEL2 | TAMP_ATCR2_ATOSEL3 | TAMP_ATCR2_ATOSEL4 |
TAMP_ATCR2_ATOSEL5 | TAMP_ATCR2_ATOSEL6 | TAMP_ATCR2_ATOSEL7 | TAMP_ATCR2_ATOSEL8);
#endif /* TAMP_ATCR2_ATOSEL1 */
return HAL_OK;
}
#endif /* TAMP */
/**
* @}
*/
/** @addtogroup RTCEx_Exported_Functions_Group1
* @brief RTC TimeStamp and Tamper functions
*
* @{
*/
/**
* @brief Handle Tamper and TimeStamp interrupt request.
* @param hrtc RTC handle
* @retval None
*/
#if defined(TAMP)
void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc)
{
/* Point on TAMPER registers base address */
TAMP_TypeDef *tamp = (TAMP_TypeDef *)((uint32_t)hrtc->Instance + TAMP_OFFSET);
/* Clear the EXTI's Flag for RTC TimeStamp and Tamper */
__HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG();
if ((hrtc->Instance->MISR & RTC_MISR_TSMF) != 0u)
{
#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
/* Call TimeStampEvent registered Callback */
hrtc->TimeStampEventCallback(hrtc);
#else
HAL_RTCEx_TimeStampEventCallback(hrtc);
#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
/* Not immediately clear flags because the content of RTC_TSTR and RTC_TSDR are cleared when TSF bit is reset.*/
hrtc->Instance->SCR = RTC_SCR_CTSF;
}
/* Get interrupt status */
uint32_t tmp = tamp->MISR;
/* Immediately clear flags */
tamp->SCR = tmp;
/* Check Tamper 1 status */
if ((tmp & RTC_TAMPER_1) == RTC_TAMPER_1)
{
#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
/* Call Tamper 1 Event registered Callback */
hrtc->Tamper1EventCallback(hrtc);
#else
/* Tamper 1 callback */
HAL_RTCEx_Tamper1EventCallback(hrtc);
#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
}
/* Check Tamper 2 status */
if ((tmp & RTC_TAMPER_2) == RTC_TAMPER_2)
{
#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
/* Call Tamper 2 Event registered Callback */
hrtc->Tamper2EventCallback(hrtc);
#else
/* Tamper 2 callback */
HAL_RTCEx_Tamper2EventCallback(hrtc);
#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
}
/* Check Tamper 3 status */
if ((tmp & RTC_TAMPER_3) == RTC_TAMPER_3)
{
#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
/* Call Tamper 3 Event registered Callback */
hrtc->Tamper3EventCallback(hrtc);
#else
/* Tamper 3 callback */
HAL_RTCEx_Tamper3EventCallback(hrtc);
#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
}
/* Check Internal Tamper 1 status */
if ((tmp & RTC_INT_TAMPER_1) == RTC_INT_TAMPER_1)
{
#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
/* Call Internal Tamper 1 Event registered callback */
hrtc->InternalTamper1EventCallback(hrtc);
#else
/* Call Internal Tamper 1 Event by-default callback */
HAL_RTCEx_InternalTamper1EventCallback(hrtc);
#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
}
/* Check Internal Tamper 2 status */
if ((tmp & RTC_INT_TAMPER_2) == RTC_INT_TAMPER_2)
{
#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
/* Call Internal Tamper 2 Event registered callback */
hrtc->InternalTamper2EventCallback(hrtc);
#else
/* Call Internal Tamper 2 Event by-default callback */
HAL_RTCEx_InternalTamper2EventCallback(hrtc);
#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
}
/* Check Internal Tamper 3 status */
if ((tmp & RTC_INT_TAMPER_3) == RTC_INT_TAMPER_3)
{
#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
/* Call Internal Tamper 3 Event registered callback */
hrtc->InternalTamper3EventCallback(hrtc);
#else
/* Call Internal Tamper 3 Event by-default callback */
HAL_RTCEx_InternalTamper3EventCallback(hrtc);
#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
}
/* Check Internal Tamper 4 status */
if ((tmp & RTC_INT_TAMPER_4) == RTC_INT_TAMPER_4)
{
#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
/* Call Internal Tamper 4 Event registered callback */
hrtc->InternalTamper4EventCallback(hrtc);
#else
/* Call Internal Tamper 4 Event by-default callback */
HAL_RTCEx_InternalTamper4EventCallback(hrtc);
#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
}
/* Check Internal Tamper 5 status */
if ((tmp & RTC_INT_TAMPER_5) == RTC_INT_TAMPER_5)
{
#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
/* Call Internal Tamper 5 Event registered callback */
hrtc->InternalTamper5EventCallback(hrtc);
#else
/* Call Internal Tamper 5 Event by-default callback */
HAL_RTCEx_InternalTamper5EventCallback(hrtc);
#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
}
/* Check Internal Tamper 6 status */
if ((tmp & RTC_INT_TAMPER_6) == RTC_INT_TAMPER_6)
{
#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
/* Call Internal Tamper 6 Event registered callback */
hrtc->InternalTamper6EventCallback(hrtc);
#else
/* Call Internal Tamper 6 Event by-default callback */
HAL_RTCEx_InternalTamper6EventCallback(hrtc);
#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
}
/* Check Internal Tamper 8 status */
if ((tmp & RTC_INT_TAMPER_8) == RTC_INT_TAMPER_8)
{
#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
/* Call Internal Tamper 8 Event registered callback */
hrtc->InternalTamper8EventCallback(hrtc);
#else
/* Call Internal Tamper 8 Event by-default callback */
HAL_RTCEx_InternalTamper8EventCallback(hrtc);
#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
}
/* Change RTC state */
hrtc->State = HAL_RTC_STATE_READY;
}
#else
void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc)
{
/* Clear the EXTI's Flag for RTC TimeStamp and Tamper */
#if defined(DUAL_CORE)
if (HAL_GetCurrentCPUID() == CM7_CPUID)
{
__HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG();
}
else
{
__HAL_RTC_TAMPER_TIMESTAMP_EXTID2_CLEAR_FLAG();
}
#else /* SINGLE_CORE */
__HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG();
#endif /* DUAL_CORE */
/* Get the TimeStamp interrupt source enable status */
if (__HAL_RTC_TIMESTAMP_GET_IT_SOURCE(hrtc, RTC_IT_TS) != 0U)
{
/* Get the pending status of the TIMESTAMP Interrupt */
if (__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSF) != 0U)
{
/* TIMESTAMP callback */
#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
hrtc->TimeStampEventCallback(hrtc);
#else /* (USE_HAL_RTC_REGISTER_CALLBACKS == 1) */
HAL_RTCEx_TimeStampEventCallback(hrtc);
#endif /* (USE_HAL_RTC_REGISTER_CALLBACKS == 1) */
/* Clear the TIMESTAMP interrupt pending bit (this will clear timestamp time and date registers) */
__HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSF);
}
}
/* Get the Tamper 1 interrupt source enable status */
if (__HAL_RTC_TAMPER_GET_IT_SOURCE(hrtc, RTC_IT_TAMP | RTC_IT_TAMP1) != 0U)
{
/* Get the pending status of the Tamper 1 Interrupt */
if (__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP1F) != 0U)
{
/* Clear the Tamper 1 interrupt pending bit */
__HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP1F);
/* Tamper 1 callback */
#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
hrtc->Tamper1EventCallback(hrtc);
#else /* (USE_HAL_RTC_REGISTER_CALLBACKS == 1) */
HAL_RTCEx_Tamper1EventCallback(hrtc);
#endif /* (USE_HAL_RTC_REGISTER_CALLBACKS == 1) */
}
}
/* Get the Tamper 2 interrupt source enable status */
if (__HAL_RTC_TAMPER_GET_IT_SOURCE(hrtc, RTC_IT_TAMP | RTC_IT_TAMP2) != 0U)
{
/* Get the pending status of the Tamper 2 Interrupt */
if (__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP2F) != 0U)
{
/* Clear the Tamper 2 interrupt pending bit */
__HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP2F);
/* Tamper 2 callback */
#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
hrtc->Tamper2EventCallback(hrtc);
#else /* (USE_HAL_RTC_REGISTER_CALLBACKS == 1) */
HAL_RTCEx_Tamper2EventCallback(hrtc);
#endif /* (USE_HAL_RTC_REGISTER_CALLBACKS == 1) */
}
}
/* Get the Tamper 3 interrupts source enable status */
if (__HAL_RTC_TAMPER_GET_IT_SOURCE(hrtc, RTC_IT_TAMP | RTC_IT_TAMP3) != 0U)
{
/* Get the pending status of the Tamper 3 Interrupt */
if (__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP3F) != 0U)
{
/* Clear the Tamper 3 interrupt pending bit */
__HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP3F);
/* Tamper 3 callback */
#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
hrtc->Tamper3EventCallback(hrtc);
#else /* (USE_HAL_RTC_REGISTER_CALLBACKS == 1) */
HAL_RTCEx_Tamper3EventCallback(hrtc);
#endif /* (USE_HAL_RTC_REGISTER_CALLBACKS == 1) */
}
}
/* Change RTC state */
hrtc->State = HAL_RTC_STATE_READY;
}
#endif /* TAMP */
/**
* @brief TimeStamp callback.
* @param hrtc RTC handle
* @retval None
*/
__weak void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hrtc);
/* NOTE : This function should not be modified, when the callback is needed,
the HAL_RTCEx_TimeStampEventCallback could be implemented in the user file
*/
}
/**
* @}
*/
/** @addtogroup RTCEx_Exported_Functions_Group5
* @brief Extended RTC Tamper functions
*
* @{
*/
/**
* @brief Tamper 1 callback.
* @param hrtc RTC handle
* @retval None
*/
__weak void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef * hrtc)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hrtc);
/* NOTE : This function should not be modified, when the callback is needed,
the HAL_RTCEx_Tamper1EventCallback could be implemented in the user file
*/
}
/**
* @brief Tamper 2 callback.
* @param hrtc RTC handle
* @retval None
*/
__weak void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef * hrtc)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hrtc);
/* NOTE : This function should not be modified, when the callback is needed,
the HAL_RTCEx_Tamper2EventCallback could be implemented in the user file
*/
}
/**
* @brief Tamper 3 callback.
* @param hrtc RTC handle
* @retval None
*/
__weak void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef * hrtc)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hrtc);
/* NOTE : This function should not be modified, when the callback is needed,
the HAL_RTCEx_Tamper3EventCallback could be implemented in the user file
*/
}
#if defined(TAMP)
/**
* @brief Internal Tamper 1 callback.
* @param hrtc RTC handle
* @retval None
*/
__weak void HAL_RTCEx_InternalTamper1EventCallback(RTC_HandleTypeDef *hrtc)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hrtc);
/* NOTE : This function should not be modified, when the callback is needed,
the HAL_RTCEx_InternalTamper1EventCallback could be implemented in the user file
*/
}
/**
* @brief Internal Tamper 2 callback.
* @param hrtc RTC handle
* @retval None
*/
__weak void HAL_RTCEx_InternalTamper2EventCallback(RTC_HandleTypeDef *hrtc)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hrtc);
/* NOTE : This function should not be modified, when the callback is needed,
the HAL_RTCEx_InternalTamper2EventCallback could be implemented in the user file
*/
}
/**
* @brief Internal Tamper 3 callback.
* @param hrtc RTC handle
* @retval None
*/
__weak void HAL_RTCEx_InternalTamper3EventCallback(RTC_HandleTypeDef *hrtc)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hrtc);
/* NOTE : This function should not be modified, when the callback is needed,
the HAL_RTCEx_InternalTamper3EventCallback could be implemented in the user file
*/
}
/**
* @brief Internal Tamper 4 callback.
* @param hrtc RTC handle
* @retval None
*/
__weak void HAL_RTCEx_InternalTamper4EventCallback(RTC_HandleTypeDef *hrtc)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hrtc);
/* NOTE : This function should not be modified, when the callback is needed,
the HAL_RTCEx_InternalTamper4EventCallback could be implemented in the user file
*/
}
/**
* @brief Internal Tamper 5 callback.
* @param hrtc RTC handle
* @retval None
*/
__weak void HAL_RTCEx_InternalTamper5EventCallback(RTC_HandleTypeDef *hrtc)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hrtc);
/* NOTE : This function should not be modified, when the callback is needed,
the HAL_RTCEx_InternalTamper5EventCallback could be implemented in the user file
*/
}
/**
* @brief Internal Tamper 6 callback.
* @param hrtc RTC handle
* @retval None
*/
__weak void HAL_RTCEx_InternalTamper6EventCallback(RTC_HandleTypeDef *hrtc)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hrtc);
/* NOTE : This function should not be modified, when the callback is needed,
the HAL_RTCEx_InternalTamper6EventCallback could be implemented in the user file
*/
}
/**
* @brief Internal Tamper 8 callback.
* @param hrtc RTC handle
* @retval None
*/
__weak void HAL_RTCEx_InternalTamper8EventCallback(RTC_HandleTypeDef *hrtc)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hrtc);
/* NOTE : This function should not be modified, when the callback is needed,
the HAL_RTCEx_InternalTamper8EventCallback could be implemented in the user file
*/
}
#endif /* TAMP */
/**
* @}
*/
/** @addtogroup RTCEx_Exported_Functions_Group1
* @brief RTC TimeStamp and Tamper functions
*
* @{
*/
/**
* @brief Handle TimeStamp polling request.
* @param hrtc RTC handle
* @param Timeout Timeout duration
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
{
uint32_t tickstart = HAL_GetTick();
while (__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSF) == 0U)
{
if (__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSOVF) != 0U)
{
/* Clear the TIMESTAMP OverRun Flag */
__HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSOVF);
/* Change TIMESTAMP state */
hrtc->State = HAL_RTC_STATE_ERROR;
return HAL_ERROR;
}
if (Timeout != HAL_MAX_DELAY)
{
if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U))
{
hrtc->State = HAL_RTC_STATE_TIMEOUT;
return HAL_TIMEOUT;
}
}
}
/* Change RTC state */
hrtc->State = HAL_RTC_STATE_READY;
return HAL_OK;
}
/**
* @}
*/
/** @addtogroup RTCEx_Exported_Functions_Group5
* @brief Extended RTC Tamper functions
*
* @{
*/
/**
* @brief Handle Tamper1 Polling.
* @param hrtc RTC handle
* @param Timeout Timeout duration
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef * hrtc, uint32_t Timeout)
{
uint32_t tickstart = HAL_GetTick();
/* Get the status of the Interrupt */
while (__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP1F) == 0U)
{
if (Timeout != HAL_MAX_DELAY)
{
if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U))
{
hrtc->State = HAL_RTC_STATE_TIMEOUT;
return HAL_TIMEOUT;
}
}
}
/* Clear the Tamper Flag */
__HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP1F);
/* Change RTC state */
hrtc->State = HAL_RTC_STATE_READY;
return HAL_OK;
}
/**
* @brief Handle Tamper2 Polling.
* @param hrtc RTC handle
* @param Timeout Timeout duration
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef * hrtc, uint32_t Timeout)
{
uint32_t tickstart = HAL_GetTick();
/* Get the status of the Interrupt */
while (__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP2F) == 0U)
{
if (Timeout != HAL_MAX_DELAY)
{
if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U))
{
hrtc->State = HAL_RTC_STATE_TIMEOUT;
return HAL_TIMEOUT;
}
}
}
/* Clear the Tamper Flag */
__HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP2F);
/* Change RTC state */
hrtc->State = HAL_RTC_STATE_READY;
return HAL_OK;
}
/**
* @brief Handle Tamper3 Polling.
* @param hrtc RTC handle
* @param Timeout Timeout duration
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RTCEx_PollForTamper3Event(RTC_HandleTypeDef * hrtc, uint32_t Timeout)
{
uint32_t tickstart = HAL_GetTick();
/* Get the status of the Interrupt */
while (__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP3F) == 0U)
{
if (Timeout != HAL_MAX_DELAY)
{
if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U))
{
hrtc->State = HAL_RTC_STATE_TIMEOUT;
return HAL_TIMEOUT;
}
}
}
/* Clear the Tamper Flag */
__HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP3F);
/* Change RTC state */
hrtc->State = HAL_RTC_STATE_READY;
return HAL_OK;
}
#if defined(TAMP)
/**
* @brief Internal Tamper event polling.
* @param hrtc RTC handle
* @param IntTamper selected tamper.
* This parameter can be any combination of existing internal tampers.
* @param Timeout Timeout duration
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RTCEx_PollForInternalTamperEvent(RTC_HandleTypeDef *hrtc, uint32_t IntTamper, uint32_t Timeout)
{
UNUSED(hrtc);
assert_param(IS_RTC_INTERNAL_TAMPER(IntTamper));
uint32_t tickstart = HAL_GetTick();
/* Get the status of the Interrupt */
while (READ_BIT(TAMP->SR, IntTamper) != IntTamper)
{
if (Timeout != HAL_MAX_DELAY)
{
if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U))
{
return HAL_TIMEOUT;
}
}
}
/* Clear the Tamper Flag */
WRITE_REG(TAMP->SCR, IntTamper);
return HAL_OK;
}
#endif /* TAMP */
/**
* @}
*/
/** @addtogroup RTCEx_Exported_Functions_Group2
* @brief RTC Wake-up functions
*
@verbatim
===============================================================================
##### RTC Wake-up functions #####
===============================================================================
[..] This section provides functions allowing to configure Wake-up feature
@endverbatim
* @{
*/
/**
* @brief Set wake up timer.
* @param hrtc RTC handle
* @param WakeUpCounter Wake up counter
* @param WakeUpClock Wake up clock
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock)
{
uint32_t tickstart;
/* Check the parameters */
assert_param(IS_RTC_WAKEUP_CLOCK(WakeUpClock));
assert_param(IS_RTC_WAKEUP_COUNTER(WakeUpCounter));
/* Process Locked */
__HAL_LOCK(hrtc);
hrtc->State = HAL_RTC_STATE_BUSY;
/* Disable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
/* Clear WUTE in RTC_CR to disable the wakeup timer */
CLEAR_BIT(RTC->CR, RTC_CR_WUTE);
/* Poll WUTWF until it is set in RTC_ICSR / RTC_ISR to make sure the access to wakeup autoreload
counter and to WUCKSEL[2:0] bits is allowed. This step must be skipped in
calendar initialization mode. */
#if defined(TAMP)
if (READ_BIT(RTC->ICSR, RTC_ICSR_INITF) == 0U)
{
tickstart = HAL_GetTick();
while (READ_BIT(hrtc->Instance->ICSR, RTC_FLAG_WUTWF) == 0U)
#else
if (READ_BIT(RTC->ISR, RTC_ISR_INITF) == 0U)
{
tickstart = HAL_GetTick();
while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == 0U)
#endif /* TAMP */
{
if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)
{
/* Enable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
hrtc->State = HAL_RTC_STATE_TIMEOUT;
/* Process Unlocked */
__HAL_UNLOCK(hrtc);
return HAL_TIMEOUT;
}
}
}
/* Clear the Wakeup Timer clock source bits and configure the clock source in CR register */
uint32_t CR_tmp = hrtc->Instance->CR;
CR_tmp &= (uint32_t)~RTC_CR_WUCKSEL;
CR_tmp |= (uint32_t)WakeUpClock;
hrtc->Instance->CR = CR_tmp;
/* Configure the Wakeup Timer counter */
hrtc->Instance->WUTR = (uint32_t)WakeUpCounter;
/* Enable the Wakeup Timer */
__HAL_RTC_WAKEUPTIMER_ENABLE(hrtc);
/* Enable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
hrtc->State = HAL_RTC_STATE_READY;
/* Process Unlocked */
__HAL_UNLOCK(hrtc);
return HAL_OK;
}
/**
* @brief Set wake up timer with interrupt.
* @param hrtc RTC handle
* @param WakeUpCounter Wake up counter
* @param WakeUpClock Wake up clock
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock)
{
uint32_t tickstart;
/* Check the parameters */
assert_param(IS_RTC_WAKEUP_CLOCK(WakeUpClock));
assert_param(IS_RTC_WAKEUP_COUNTER(WakeUpCounter));
/* Process Locked */
__HAL_LOCK(hrtc);
hrtc->State = HAL_RTC_STATE_BUSY;
/* Disable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
/* Clear WUTE in RTC_CR to disable the wakeup timer */
CLEAR_BIT(RTC->CR, RTC_CR_WUTE);
/* Poll WUTWF until it is set in RTC_ICSR to make sure the access to wakeup autoreload
counter and to WUCKSEL[2:0] bits is allowed. This step must be skipped in
calendar initialization mode. */
#if defined(TAMP)
if (READ_BIT(RTC->ICSR, RTC_ICSR_INITF) == 0U)
{
tickstart = HAL_GetTick();
while (READ_BIT(hrtc->Instance->ICSR, RTC_FLAG_WUTWF) == 0U)
#else
if (READ_BIT(RTC->ISR, RTC_ISR_INITF) == 0U)
{
tickstart = HAL_GetTick();
while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == 0U)
#endif /* TAMP */
{
if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)
{
/* Enable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
hrtc->State = HAL_RTC_STATE_TIMEOUT;
/* Process Unlocked */
__HAL_UNLOCK(hrtc);
return HAL_TIMEOUT;
}
}
}
/* Configure the Wakeup Timer counter */
hrtc->Instance->WUTR = (uint32_t)WakeUpCounter;
/* Clear the Wakeup Timer clock source bits and configure the clock source in CR register */
{
uint32_t CR_tmp = hrtc->Instance->CR;
CR_tmp &= (uint32_t)~RTC_CR_WUCKSEL;
CR_tmp |= (uint32_t)WakeUpClock;
hrtc->Instance->CR = CR_tmp;
}
/* RTC WakeUpTimer Interrupt Configuration: EXTI configuration */
#if defined(DUAL_CORE)
if (HAL_GetCurrentCPUID() == CM7_CPUID)
{
__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT();
}
else
{
__HAL_RTC_WAKEUPTIMER_EXTID2_ENABLE_IT();
}
#else /* SINGLE_CORE */
__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT();
#endif /* DUAL_CORE */
__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();
/* Configure the Interrupt in the RTC_CR register */
__HAL_RTC_WAKEUPTIMER_ENABLE_IT(hrtc, RTC_IT_WUT);
/* Enable the Wakeup Timer */
__HAL_RTC_WAKEUPTIMER_ENABLE(hrtc);
/* Enable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
hrtc->State = HAL_RTC_STATE_READY;
/* Process Unlocked */
__HAL_UNLOCK(hrtc);
return HAL_OK;
}
/**
* @brief Deactivate wake up timer counter.
* @param hrtc RTC handle
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc)
{
uint32_t tickstart;
/* Process Locked */
__HAL_LOCK(hrtc);
hrtc->State = HAL_RTC_STATE_BUSY;
/* Disable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
/* Disable the Wakeup Timer */
__HAL_RTC_WAKEUPTIMER_DISABLE(hrtc);
/* In case of interrupt mode is used, the interrupt source must disabled */
__HAL_RTC_WAKEUPTIMER_DISABLE_IT(hrtc, RTC_IT_WUT);
tickstart = HAL_GetTick();
/* Wait till RTC WUTWF flag is set and if timeout is reached exit */
#if defined(TAMP)
while (READ_BIT(hrtc->Instance->ICSR, RTC_FLAG_WUTWF) == 0U)
#else
while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == 0U)
#endif /* TAMP */
{
if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)
{
/* Enable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
hrtc->State = HAL_RTC_STATE_TIMEOUT;
/* Process Unlocked */
__HAL_UNLOCK(hrtc);
return HAL_TIMEOUT;
}
}
/* Enable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
hrtc->State = HAL_RTC_STATE_READY;
/* Process Unlocked */
__HAL_UNLOCK(hrtc);
return HAL_OK;
}
/**
* @brief Get wake up timer counter.
* @param hrtc RTC handle
* @retval Counter value
*/
uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc)
{
/* Get the counter value */
return ((uint32_t)(hrtc->Instance->WUTR & RTC_WUTR_WUT));
}
/**
* @brief Handle Wake Up Timer interrupt request.
* @param hrtc RTC handle
* @retval None
*/
void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc)
{
/* Clear the EXTI's line Flag for RTC WakeUpTimer */
#if defined(DUAL_CORE)
if (HAL_GetCurrentCPUID() == CM7_CPUID)
{
__HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG();
}
else
{
__HAL_RTC_WAKEUPTIMER_EXTID2_CLEAR_FLAG();
}
#else /* SINGLE_CORE */
__HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG();
#endif /* DUAL_CORE */
#if defined(TAMP)
/* Get the pending status of the WAKEUPTIMER Interrupt */
if ((hrtc->Instance->MISR & RTC_MISR_WUTMF) != 0u)
{
/* Immediately clear flags */
hrtc->Instance->SCR = RTC_SCR_CWUTF;
/* WAKEUPTIMER callback */
#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
/* Call WakeUpTimerEvent registered Callback */
hrtc->WakeUpTimerEventCallback(hrtc);
#else
HAL_RTCEx_WakeUpTimerEventCallback(hrtc);
#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
}
#else
/* Get the pending status of the WAKEUPTIMER Interrupt */
if (__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTF) != 0U)
{
/* Clear the WAKEUPTIMER interrupt pending bit */
__HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF);
/* WAKEUPTIMER callback */
#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
/* Call WakeUpTimerEvent registered Callback */
hrtc->WakeUpTimerEventCallback(hrtc);
#else
HAL_RTCEx_WakeUpTimerEventCallback(hrtc);
#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
}
#endif /* TAMP */
/* Change RTC state */
hrtc->State = HAL_RTC_STATE_READY;
}
/**
* @brief Wake Up Timer callback.
* @param hrtc RTC handle
* @retval None
*/
__weak void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef * hrtc)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hrtc);
/* NOTE : This function should not be modified, when the callback is needed,
the HAL_RTCEx_WakeUpTimerEventCallback could be implemented in the user file
*/
}
/**
* @brief Handle Wake Up Timer Polling.
* @param hrtc RTC handle
* @param Timeout Timeout duration
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef * hrtc, uint32_t Timeout)
{
uint32_t tickstart = HAL_GetTick();
while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTF) == 0U)
{
if (Timeout != HAL_MAX_DELAY)
{
if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U))
{
hrtc->State = HAL_RTC_STATE_TIMEOUT;
return HAL_TIMEOUT;
}
}
}
/* Clear the WAKEUPTIMER Flag */
__HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF);
/* Change RTC state */
hrtc->State = HAL_RTC_STATE_READY;
return HAL_OK;
}
/**
* @}
*/
/** @addtogroup RTCEx_Exported_Functions_Group6
* @brief Extended RTC Backup register functions
*
@verbatim
===============================================================================
##### Extended RTC Backup register functions #####
===============================================================================
[..]
(+) Before calling any tamper or internal tamper function, you have to call first
HAL_RTC_Init() function.
(+) In that ine you can select to output tamper event on RTC pin.
[..]
This subsection provides functions allowing to
(+) Write a data in a specified RTC Backup data register
(+) Read a data in a specified RTC Backup data register
@endverbatim
* @{
*/
/**
* @brief Write a data in a specified RTC Backup data register.
* @param hrtc RTC handle
* @param BackupRegister RTC Backup data Register number.
* This parameter can be: RTC_BKP_DRx where x can be from 0 to 31 to
* specify the register.
* @param Data Data to be written in the specified Backup data register.
* @retval None
*/
void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef * hrtc, uint32_t BackupRegister, uint32_t Data)
{
uint32_t tmp;
/* Check the parameters */
assert_param(IS_RTC_BKP(BackupRegister));
/* Point on address of first backup register */
#if defined(TAMP)
tmp = (uint32_t) & (((TAMP_TypeDef *)((uint32_t)hrtc->Instance + TAMP_OFFSET))->BKP0R);
#else
tmp = (uint32_t) & (hrtc->Instance->BKP0R);
#endif /* TAMP */
tmp += (BackupRegister * 4U);
/* Write the specified register */
*(__IO uint32_t *)tmp = (uint32_t)Data;
}
/**
* @brief Read data from the specified RTC Backup data Register.
* @param hrtc RTC handle
* @param BackupRegister RTC Backup data Register number.
* This parameter can be: RTC_BKP_DRx where x can be from 0 to 31 to
* specify the register.
* @retval Read value
*/
uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef * hrtc, uint32_t BackupRegister)
{
uint32_t tmp;
/* Check the parameters */
assert_param(IS_RTC_BKP(BackupRegister));
/* Point on address of first backup register */
#if defined(TAMP)
tmp = (uint32_t) & (((TAMP_TypeDef *)((uint32_t)hrtc->Instance + TAMP_OFFSET))->BKP0R);
#else
tmp = (uint32_t) & (hrtc->Instance->BKP0R);
#endif /* TAMP */
tmp += (BackupRegister * 4U);
/* Read the specified register */
return (*(__IO uint32_t *)tmp);
}
/**
* @}
*/
/** @addtogroup RTCEx_Exported_Functions_Group3
* @brief Extended Peripheral Control functions
*
@verbatim
===============================================================================
##### Extended Peripheral Control functions #####
===============================================================================
[..]
This subsection provides functions allowing to
(+) Write a data in a specified RTC Backup data register
(+) Read a data in a specified RTC Backup data register
(+) Set the Smooth calibration parameters.
(+) Set Low Power calibration parameter (if feature supported).
(+) Configure the Synchronization Shift Control Settings.
(+) Configure the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
(+) Deactivate the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
(+) Enable the RTC reference clock detection.
(+) Disable the RTC reference clock detection.
(+) Enable the Bypass Shadow feature.
(+) Disable the Bypass Shadow feature.
@endverbatim
* @{
*/
/**
* @brief Set the Smooth calibration parameters.
* @param hrtc RTC handle
* @param SmoothCalibPeriod Select the Smooth Calibration Period.
* This parameter can be can be one of the following values :
* @arg RTC_SMOOTHCALIB_PERIOD_32SEC: The smooth calibration period is 32s.
* @arg RTC_SMOOTHCALIB_PERIOD_16SEC: The smooth calibration period is 16s.
* @arg RTC_SMOOTHCALIB_PERIOD_8SEC: The smooth calibration period is 8s.
* @param SmoothCalibPlusPulses Select to Set or reset the CALP bit.
* This parameter can be one of the following values:
* @arg RTC_SMOOTHCALIB_PLUSPULSES_SET: Add one RTCCLK pulse every 2*11 pulses.
* @arg RTC_SMOOTHCALIB_PLUSPULSES_RESET: No RTCCLK pulses are added.
* @param SmoothCalibMinusPulsesValue Select the value of CALM[8:0] bits.
* This parameter can be one any value from 0 to 0x000001FF.
* @note To deactivate the smooth calibration, the field SmoothCalibPlusPulses
* must be equal to SMOOTHCALIB_PLUSPULSES_RESET and the field
* SmoothCalibMinusPulsesValue must be equal to 0.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef * hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmoothCalibMinusPulsesValue)
{
uint32_t tickstart;
/* Check the parameters */
assert_param(IS_RTC_SMOOTH_CALIB_PERIOD(SmoothCalibPeriod));
assert_param(IS_RTC_SMOOTH_CALIB_PLUS(SmoothCalibPlusPulses));
assert_param(IS_RTC_SMOOTH_CALIB_MINUS(SmoothCalibMinusPulsesValue));
/* Process Locked */
__HAL_LOCK(hrtc);
hrtc->State = HAL_RTC_STATE_BUSY;
/* Disable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
#if defined(TAMP)
/* check if a calibration operation is pending */
if ((hrtc->Instance->ICSR & RTC_ICSR_RECALPF) != 0U)
{
tickstart = HAL_GetTick();
/* Wait for pending calibration operation to finish */
while ((hrtc->Instance->ICSR & RTC_ICSR_RECALPF) != 0U)
#else
/* check if a calibration operation is pending */
if ((hrtc->Instance->ISR & RTC_ISR_RECALPF) != 0U)
{
tickstart = HAL_GetTick();
/* Wait for pending calibration operation to finish */
while ((hrtc->Instance->ISR & RTC_ISR_RECALPF) != 0U)
#endif /* TAMP */
{
if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)
{
/* Enable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
/* Change RTC state */
hrtc->State = HAL_RTC_STATE_TIMEOUT;
/* Process Unlocked */
__HAL_UNLOCK(hrtc);
return HAL_TIMEOUT;
}
}
}
/* Configure the Smooth calibration settings */
MODIFY_REG(hrtc->Instance->CALR, (RTC_CALR_CALP | RTC_CALR_CALW8 | RTC_CALR_CALW16 | RTC_CALR_CALM), (uint32_t)(SmoothCalibPeriod | SmoothCalibPlusPulses | SmoothCalibMinusPulsesValue));
/* Enable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
/* Change RTC state */
hrtc->State = HAL_RTC_STATE_READY;
/* Process Unlocked */
__HAL_UNLOCK(hrtc);
return HAL_OK;
}
/**
* @brief Configure the Synchronization Shift Control Settings.
* @note When REFCKON is set, firmware must not write to Shift control register.
* @param hrtc RTC handle
* @param ShiftAdd1S Select to add or not 1 second to the time calendar.
* This parameter can be one of the following values:
* @arg RTC_SHIFTADD1S_SET: Add one second to the clock calendar.
* @arg RTC_SHIFTADD1S_RESET: No effect.
* @param ShiftSubFS Select the number of Second Fractions to substitute.
* This parameter can be one any value from 0 to 0x7FFF.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef * hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS)
{
uint32_t tickstart;
/* Check the parameters */
assert_param(IS_RTC_SHIFT_ADD1S(ShiftAdd1S));
assert_param(IS_RTC_SHIFT_SUBFS(ShiftSubFS));
/* Process Locked */
__HAL_LOCK(hrtc);
hrtc->State = HAL_RTC_STATE_BUSY;
/* Disable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
tickstart = HAL_GetTick();
/* Wait until the shift is completed */
#if defined(TAMP)
while ((hrtc->Instance->ICSR & RTC_ICSR_SHPF) != 0U)
#else
while ((hrtc->Instance->ISR & RTC_ISR_SHPF) != 0U)
#endif /* TAMP */
{
if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)
{
/* Enable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
hrtc->State = HAL_RTC_STATE_TIMEOUT;
/* Process Unlocked */
__HAL_UNLOCK(hrtc);
return HAL_TIMEOUT;
}
}
/* Check if the reference clock detection is disabled */
if ((hrtc->Instance->CR & RTC_CR_REFCKON) == 0U)
{
/* Configure the Shift settings */
hrtc->Instance->SHIFTR = (uint32_t)(uint32_t)(ShiftSubFS) | (uint32_t)(ShiftAdd1S);
/* If RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */
if ((hrtc->Instance->CR & RTC_CR_BYPSHAD) == 0U)
{
if (HAL_RTC_WaitForSynchro(hrtc) != HAL_OK)
{
/* Enable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
hrtc->State = HAL_RTC_STATE_ERROR;
/* Process Unlocked */
__HAL_UNLOCK(hrtc);
return HAL_ERROR;
}
}
}
else
{
/* Enable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
/* Change RTC state */
hrtc->State = HAL_RTC_STATE_ERROR;
/* Process Unlocked */
__HAL_UNLOCK(hrtc);
return HAL_ERROR;
}
/* Enable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
/* Change RTC state */
hrtc->State = HAL_RTC_STATE_READY;
/* Process Unlocked */
__HAL_UNLOCK(hrtc);
return HAL_OK;
}
/**
* @brief Configure the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
* @param hrtc RTC handle
* @param CalibOutput Select the Calibration output Selection.
* This parameter can be one of the following values:
* @arg RTC_CALIBOUTPUT_512HZ: A signal has a regular waveform at 512Hz.
* @arg RTC_CALIBOUTPUT_1HZ: A signal has a regular waveform at 1Hz.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef * hrtc, uint32_t CalibOutput)
{
/* Check the parameters */
assert_param(IS_RTC_CALIB_OUTPUT(CalibOutput));
/* Process Locked */
__HAL_LOCK(hrtc);
hrtc->State = HAL_RTC_STATE_BUSY;
/* Disable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
/* Clear flags before config */
hrtc->Instance->CR &= (uint32_t)~RTC_CR_COSEL;
/* Configure the RTC_CR register */
hrtc->Instance->CR |= (uint32_t)CalibOutput;
__HAL_RTC_CALIBRATION_OUTPUT_ENABLE(hrtc);
/* Enable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
/* Change RTC state */
hrtc->State = HAL_RTC_STATE_READY;
/* Process Unlocked */
__HAL_UNLOCK(hrtc);
return HAL_OK;
}
/**
* @brief Deactivate the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
* @param hrtc RTC handle
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef * hrtc)
{
/* Process Locked */
__HAL_LOCK(hrtc);
hrtc->State = HAL_RTC_STATE_BUSY;
/* Disable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
__HAL_RTC_CALIBRATION_OUTPUT_DISABLE(hrtc);
/* Enable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
/* Change RTC state */
hrtc->State = HAL_RTC_STATE_READY;
/* Process Unlocked */
__HAL_UNLOCK(hrtc);
return HAL_OK;
}
/**
* @brief Enable the RTC reference clock detection.
* @param hrtc RTC handle
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef * hrtc)
{
HAL_StatusTypeDef status;
/* Process Locked */
__HAL_LOCK(hrtc);
hrtc->State = HAL_RTC_STATE_BUSY;
/* Disable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
/* Enter Initialization mode */
status = RTC_EnterInitMode(hrtc);
if (status == HAL_OK)
{
__HAL_RTC_CLOCKREF_DETECTION_ENABLE(hrtc);
/* Exit Initialization mode */
status = RTC_ExitInitMode(hrtc);
}
/* Enable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
if (status == HAL_OK)
{
/* Change RTC state */
hrtc->State = HAL_RTC_STATE_READY;
}
/* Process Unlocked */
__HAL_UNLOCK(hrtc);
return HAL_OK;
}
/**
* @brief Disable the RTC reference clock detection.
* @param hrtc RTC handle
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef * hrtc)
{
HAL_StatusTypeDef status;
/* Process Locked */
__HAL_LOCK(hrtc);
hrtc->State = HAL_RTC_STATE_BUSY;
/* Disable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
/* Enter Initialization mode */
status = RTC_EnterInitMode(hrtc);
if (status == HAL_OK)
{
__HAL_RTC_CLOCKREF_DETECTION_DISABLE(hrtc);
/* Exit Initialization mode */
status = RTC_ExitInitMode(hrtc);
}
/* Enable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
if (status == HAL_OK)
{
/* Change RTC state */
hrtc->State = HAL_RTC_STATE_READY;
}
/* Process Unlocked */
__HAL_UNLOCK(hrtc);
return HAL_OK;
}
/**
* @brief Enable the Bypass Shadow feature.
* @note When the Bypass Shadow is enabled the calendar value are taken
* directly from the Calendar counter.
* @param hrtc RTC handle
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef * hrtc)
{
/* Process Locked */
__HAL_LOCK(hrtc);
hrtc->State = HAL_RTC_STATE_BUSY;
/* Disable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
/* Set the BYPSHAD bit */
hrtc->Instance->CR |= (uint8_t)RTC_CR_BYPSHAD;
/* Enable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
/* Change RTC state */
hrtc->State = HAL_RTC_STATE_READY;
/* Process Unlocked */
__HAL_UNLOCK(hrtc);
return HAL_OK;
}
/**
* @brief Disable the Bypass Shadow feature.
* @note When the Bypass Shadow is enabled the calendar value are taken
* directly from the Calendar counter.
* @param hrtc RTC handle
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef * hrtc)
{
/* Process Locked */
__HAL_LOCK(hrtc);
hrtc->State = HAL_RTC_STATE_BUSY;
/* Disable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
/* Reset the BYPSHAD bit */
hrtc->Instance->CR &= ((uint8_t)~RTC_CR_BYPSHAD);
/* Enable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
/* Change RTC state */
hrtc->State = HAL_RTC_STATE_READY;
/* Process Unlocked */
__HAL_UNLOCK(hrtc);
return HAL_OK;
}
#if defined(TAMP)
/**
* @brief Increment Monotonic counter.
* @param hrtc RTC handle
* @param Instance Monotonic counter Instance
* This parameter can be can be one of the following values :
* @arg RTC_MONOTONIC_COUNTER_1
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RTCEx_MonotonicCounterIncrement(RTC_HandleTypeDef *hrtc, uint32_t Instance)
{
UNUSED(hrtc);
UNUSED(Instance);
/* This register is read-only only and is incremented by one when a write access is done to this
register. This register cannot roll-over and is frozen when reaching the maximum value. */
CLEAR_REG(TAMP->COUNTR);
return HAL_OK;
}
/**
* @brief Monotonic counter incrementation.
* @param hrtc RTC handle
* @param Instance Monotonic counter Instance
* This parameter can be can be one of the following values :
* @arg RTC_MONOTONIC_COUNTER_1
* @param Counter monotonic counter value
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RTCEx_MonotonicCounterGet(RTC_HandleTypeDef *hrtc, uint32_t *Counter, uint32_t Instance)
{
UNUSED(hrtc);
UNUSED(Instance);
/* This register is read-only only and is incremented by one when a write access is done to this
register. This register cannot roll-over and is frozen when reaching the maximum value. */
*Counter = READ_REG(TAMP->COUNTR);
return HAL_OK;
}
#endif /* TAMP */
/**
* @}
*/
/** @addtogroup RTCEx_Exported_Functions_Group4
* @brief Extended features functions
*
@verbatim
===============================================================================
##### Extended features functions #####
===============================================================================
[..] This section provides functions allowing to:
(+) RTC Alarm B callback
(+) RTC Poll for Alarm B request
@endverbatim
* @{
*/
/**
* @brief Alarm B callback.
* @param hrtc RTC handle
* @retval None
*/
__weak void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef * hrtc)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hrtc);
/* NOTE : This function should not be modified, when the callback is needed,
the HAL_RTCEx_AlarmBEventCallback could be implemented in the user file
*/
}
/**
* @brief Handle Alarm B Polling request.
* @param hrtc RTC handle
* @param Timeout Timeout duration
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef * hrtc, uint32_t Timeout)
{
uint32_t tickstart = HAL_GetTick();
while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBF) == 0U)
{
if (Timeout != HAL_MAX_DELAY)
{
if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U))
{
hrtc->State = HAL_RTC_STATE_TIMEOUT;
return HAL_TIMEOUT;
}
}
}
/* Clear the Alarm Flag */
__HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRBF);
/* Change RTC state */
hrtc->State = HAL_RTC_STATE_READY;
return HAL_OK;
}
/**
* @}
*/
/**
* @}
*/
#endif /* HAL_RTC_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/