Merge branch 'mvbms-test'
This commit is contained in:
22
.mxproject
22
.mxproject
File diff suppressed because one or more lines are too long
@ -1,37 +0,0 @@
|
||||
/*
|
||||
* AMS_CAN.h
|
||||
*
|
||||
* Created on: Mar 19, 2022
|
||||
* Author: jasper
|
||||
*/
|
||||
|
||||
#ifndef INC_AMS_CAN_H_
|
||||
#define INC_AMS_CAN_H_
|
||||
|
||||
#include "main.h"
|
||||
|
||||
#include "stm32f3xx_hal.h"
|
||||
#include "stm32f3xx_hal_can.h"
|
||||
#include "stm32f3xx_hal_def.h"
|
||||
#include <stdint.h>
|
||||
typedef struct {
|
||||
uint8_t pwrgndfans;
|
||||
} rx_status_frame;
|
||||
uint8_t txbuffer;
|
||||
uint8_t rxbuffer;
|
||||
void ams_can_init(CAN_HandleTypeDef* hcan);
|
||||
void ams_can_handle_ams_msg(CAN_RxHeaderTypeDef* header, uint8_t* data);
|
||||
void ams_can_send_status();
|
||||
/**
|
||||
* @brief Send an AMS Error via CAN.
|
||||
*
|
||||
* Data is taken from error_data
|
||||
*/
|
||||
void ams_can_send_error();
|
||||
|
||||
HAL_StatusTypeDef ams_can_wait_for_free_mailboxes(CAN_HandleTypeDef* handle,
|
||||
int num_mailboxes,
|
||||
uint32_t timeout);
|
||||
void ams_can_send_log();
|
||||
|
||||
#endif /* INC_AMS_CAN_H_ */
|
||||
@ -11,7 +11,12 @@
|
||||
#include "ADBMS_Abstraction.h"
|
||||
#include "ADBMS_CMD_MAKROS.h"
|
||||
#include "ADBMS_LL_Driver.h"
|
||||
#include "AMS_CAN.h"
|
||||
#include "can.h"
|
||||
#include "TMP1075.h"
|
||||
#include "can-halal.h"
|
||||
#include "errors.h"
|
||||
#include "stm32f3xx_hal.h"
|
||||
#include <stdint.h>
|
||||
|
||||
typedef enum {
|
||||
AMSDEACTIVE,
|
||||
|
||||
33
Core/Inc/PWM_control.h
Normal file
33
Core/Inc/PWM_control.h
Normal file
@ -0,0 +1,33 @@
|
||||
#ifndef INC_PWM_CONTROL_H
|
||||
#define INC_PWM_CONTROL_H
|
||||
|
||||
#include "stm32f3xx_hal.h"
|
||||
#include "ADBMS_LL_Driver.h"
|
||||
#include "state_machine.h"
|
||||
#include <stdint.h>
|
||||
#include "main.h"
|
||||
|
||||
/* The PWM period (1/FPWM) is defined by the following parameters:
|
||||
ARR value, the Prescaler value, and the internal clock itself which drives the timer module FCLK.
|
||||
F_PWM = (F_CLK)/((ARR + 1) * (PSC + 1))
|
||||
|
||||
F_CLK = 16 MHz
|
||||
|
||||
POWERGROUND ESC Signal: pulse every 20 ms, 1 ms = 0%, 2 ms = 100%
|
||||
FREQ = 50 Hz -> 16 MHz/50 Hz = 320000 = ((39999 + 1) * (7 + 1))
|
||||
DUTY CYCLE = 1/20 -> 0%, DUTY CYCLE = 2/20 -> 100%
|
||||
CCR * DUTY_CYCLE
|
||||
CCR: 1/20 -> 500, 2/20 -> 1000
|
||||
*/
|
||||
#define POWERGROUND_FREQ 50
|
||||
#define POWERGROUND_MAX_DUTY_CYCLE 0.1
|
||||
#define POWERGROUND_MIN_DUTY_CYCLE 0.05
|
||||
|
||||
//#define BATTERY_COOLING_FREQ 20000
|
||||
|
||||
void PWM_control_init(TIM_HandleTypeDef* powerground, TIM_HandleTypeDef* battery_cooling);
|
||||
|
||||
void PWM_powerground_control(uint8_t percent);
|
||||
void PWM_battery_cooling_control(uint8_t percent);
|
||||
|
||||
#endif /* INC_CHANNEL_CONTROL_H */
|
||||
@ -1,15 +1,17 @@
|
||||
#ifndef INC_TMP1075_H_
|
||||
#define INC_TMP1075_H_
|
||||
|
||||
#include "AMS_CAN.h"
|
||||
#include "can.h"
|
||||
#include "common_defs.h"
|
||||
#include "stm32f3xx_hal.h"
|
||||
#include "stm32f3xx_hal_def.h"
|
||||
#include "stm32f3xx_hal_i2c.h"
|
||||
#include "TMP1075.h"
|
||||
#include "can-halal.h"
|
||||
#include "errors.h"
|
||||
#include <stdint.h>
|
||||
|
||||
extern uint32_t tmp1075_failed_sensors;
|
||||
extern int16_t tmp1075_temps[N_TEMP_SENSORS];
|
||||
|
||||
HAL_StatusTypeDef tmp1075_init(I2C_HandleTypeDef* hi2c);
|
||||
HAL_StatusTypeDef tmp1075_measure();
|
||||
HAL_StatusTypeDef tmp1075_sensor_init(int n);
|
||||
|
||||
23
Core/Inc/can.h
Normal file
23
Core/Inc/can.h
Normal file
@ -0,0 +1,23 @@
|
||||
#ifndef INC_CAN_H
|
||||
#define INC_CAN_H
|
||||
|
||||
#include "stm32f3xx_hal.h"
|
||||
#include "ADBMS_Abstraction.h"
|
||||
#include "main.h"
|
||||
#include "can-halal.h"
|
||||
#include "AMS_HighLevel.h"
|
||||
#include "state_machine.h"
|
||||
#include <stdint.h>
|
||||
|
||||
#define CAN_ID_IN 0x501
|
||||
#define CAN_ID_OUT 0x502
|
||||
#define CAN_STATUS_FREQ 1000
|
||||
void can_init(CAN_HandleTypeDef* hcan);
|
||||
|
||||
void can_handle_send_status();
|
||||
|
||||
void can_handle_recieve_command(const uint8_t *data);
|
||||
|
||||
void ftcan_msg_received_cb(uint16_t id, size_t datalen, const uint8_t *data);
|
||||
|
||||
#endif /* "INC_CAN_H" */
|
||||
@ -8,7 +8,7 @@
|
||||
#ifndef INC_COMMON_DEFS_H_
|
||||
#define INC_COMMON_DEFS_H_
|
||||
|
||||
#define N_CELLS 14
|
||||
#define N_TEMP_SENSORS 14
|
||||
#define N_CELLS 12
|
||||
#define N_TEMP_SENSORS 12
|
||||
|
||||
#endif /* INC_COMMON_DEFS_H_ */
|
||||
|
||||
@ -1,17 +0,0 @@
|
||||
#ifndef INC_EEPROM_H_
|
||||
#define INC_EEPROM_H_
|
||||
|
||||
#include "stm32f3xx_hal.h"
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
__attribute__((packed)) typedef struct {
|
||||
uint8_t id;
|
||||
} EEPROMConfig;
|
||||
|
||||
extern EEPROMConfig eeprom_config;
|
||||
|
||||
void eeprom_init(I2C_HandleTypeDef* hi2c);
|
||||
void eeprom_config_save();
|
||||
|
||||
#endif // INC_EEPROM_H_
|
||||
@ -73,10 +73,8 @@ void Error_Handler(void);
|
||||
#define STATUS_LED_G_GPIO_Port GPIOB
|
||||
#define PRECHARGE_EN_Pin GPIO_PIN_11
|
||||
#define PRECHARGE_EN_GPIO_Port GPIOB
|
||||
#define AUX_IN_Pin GPIO_PIN_13
|
||||
#define AUX_IN_GPIO_Port GPIOB
|
||||
#define AUX_OUT_Pin GPIO_PIN_14
|
||||
#define AUX_OUT_GPIO_Port GPIOB
|
||||
#define PWM_Battery_Cooling_Pin GPIO_PIN_15
|
||||
#define PWM_Battery_Cooling_GPIO_Port GPIOB
|
||||
#define RELAY_BATT_SIDE_ON_Pin GPIO_PIN_8
|
||||
#define RELAY_BATT_SIDE_ON_GPIO_Port GPIOA
|
||||
#define RELAY_ESC_SIDE_ON_Pin GPIO_PIN_9
|
||||
|
||||
96
Core/Inc/state_machine.h
Normal file
96
Core/Inc/state_machine.h
Normal file
@ -0,0 +1,96 @@
|
||||
#ifndef INC_STATE_MACHINE_H
|
||||
#define INC_STATE_MACHINE_H
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include "ADBMS_LL_Driver.h"
|
||||
#include "AMS_HighLevel.h"
|
||||
#include "errors.h"
|
||||
#include "PWM_control.h"
|
||||
#include "TMP1075.h"
|
||||
#include <math.h>
|
||||
|
||||
// Minimum vehicle side voltage to exit precharge
|
||||
#define MIN_VEHICLE_SIDE_VOLTAGE 150000 // mV
|
||||
// Time to wait after reaching 95% of battery voltage before exiting precharge
|
||||
// Set this to 1000 in scruti to demonstrate the voltage on the multimeter
|
||||
#define PRECHARGE_95_DURATION 0 // ms
|
||||
// Time to wait for discharge
|
||||
#define DISCHARGE_DURATION 5000 // ms
|
||||
// Time to wait after there is no more error condition before exiting TS_ERROR
|
||||
#define NO_ERROR_TIME 1000 // ms
|
||||
// Time to wait for charger voltage before going to TS_ERROR
|
||||
#define MAX_CHARGING_CHECK_DURATION 2000 // ms
|
||||
// Time to wait between closing relays
|
||||
#define RELAY_CLOSE_WAIT 10 // ms
|
||||
|
||||
#warning
|
||||
typedef enum { // states -> 3 bit. valid transitions: (all could transition to error)
|
||||
STATE_INACTIVE, // INACTIVE -> PRECHARGE, CHARGING, ERROR
|
||||
STATE_PRECHARGE, // PRECHARGE -> INACTIVE, READY, DISCHARGE, ERROR
|
||||
STATE_READY, // READY -> ACTIVE, DISCHARGE, ERROR
|
||||
STATE_ACTIVE, // ACTIVE -> READY, DISCHARGE, ERROR
|
||||
STATE_DISCHARGE, // DISCHARGE -> INACTIVE, PRECHARGE, ERROR
|
||||
STATE_CHARGING_PRECHARGE,
|
||||
STATE_CHARGING, // CHARGING -> INACTIVE, DISCHARGE, ERROR
|
||||
STATE_ERROR, // ERROR -> INACTIVE, DISCHARGE, ERROR
|
||||
} State;
|
||||
|
||||
typedef struct {
|
||||
|
||||
uint16_t bms_timeout : 1;
|
||||
uint16_t bms_fault : 1;
|
||||
uint16_t temperature_error : 1;
|
||||
uint16_t current_error : 1;
|
||||
uint16_t current_sensor_missing : 1;
|
||||
uint16_t voltage_error : 1;
|
||||
uint16_t voltage_missing : 1;
|
||||
uint16_t state_transition_fail : 1;
|
||||
|
||||
} ErrorKind;
|
||||
|
||||
//typedef enum {} WarningKind;
|
||||
|
||||
typedef struct {
|
||||
State current_state;
|
||||
State target_state;
|
||||
uint16_t error_source; // TSErrorSource (bitmask)
|
||||
ErrorKind error_type; // TSErrorKind
|
||||
} StateHandle;
|
||||
|
||||
extern StateHandle state;
|
||||
static bool relay_closed = 0;
|
||||
static bool precharge_closed = 0;
|
||||
extern int16_t RELAY_BAT_SIDE_VOLTAGE;
|
||||
extern int16_t RELAY_ESC_SIDE_VOLTAGE;
|
||||
extern int16_t CURRENT_MEASUREMENT;
|
||||
extern uint8_t powerground_status;
|
||||
|
||||
|
||||
void sm_init();
|
||||
void sm_update();
|
||||
|
||||
State sm_update_inactive();
|
||||
State sm_update_precharge();
|
||||
State sm_update_ready();
|
||||
State sm_update_active();
|
||||
State sm_update_discharge();
|
||||
State sm_update_charging_precharge();
|
||||
State sm_update_charging();
|
||||
State sm_update_error();
|
||||
|
||||
typedef enum { RELAY_MAIN, RELAY_PRECHARGE } Relay;
|
||||
void sm_set_relay_positions(State state);
|
||||
void sm_set_relay(Relay relay, bool closed);
|
||||
void sm_check_charging();
|
||||
void sm_check_battery_temperature(int8_t* id, int16_t* temp);
|
||||
|
||||
int16_t sm_return_cell_temperature(int id);
|
||||
int16_t sm_return_cell_voltage(int id);
|
||||
|
||||
void sm_handle_ams_in(const uint8 *data);
|
||||
void sm_check_errors();
|
||||
void sm_set_error(ErrorKind error_kind, bool is_errored);
|
||||
void sm_test_cycle_states();
|
||||
|
||||
#endif /* "INC_STATE_MACHINE_H" */
|
||||
@ -81,7 +81,7 @@
|
||||
* (when HSE is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
|
||||
#define HSE_VALUE ((uint32_t)16000000) /*!< Value of the External oscillator in Hz */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
/**
|
||||
|
||||
@ -55,6 +55,8 @@ void SVC_Handler(void);
|
||||
void DebugMon_Handler(void);
|
||||
void PendSV_Handler(void);
|
||||
void SysTick_Handler(void);
|
||||
void USB_LP_CAN_RX0_IRQHandler(void);
|
||||
void CAN_RX1_IRQHandler(void);
|
||||
/* USER CODE BEGIN EFP */
|
||||
|
||||
/* USER CODE END EFP */
|
||||
|
||||
@ -1,115 +0,0 @@
|
||||
/*
|
||||
* AMS_CAN.c
|
||||
*
|
||||
* Created on: Mar 19, 2022
|
||||
* Author: jasper
|
||||
*/
|
||||
|
||||
#include "AMS_CAN.h"
|
||||
|
||||
#include "ADBMS_Abstraction.h"
|
||||
|
||||
#include "AMS_HighLevel.h"
|
||||
#include "TMP1075.h"
|
||||
#include "common_defs.h"
|
||||
#include "eeprom.h"
|
||||
#include "errors.h"
|
||||
#include "main.h"
|
||||
#include "stm32f3xx.h"
|
||||
#include "stm32f3xx_hal.h"
|
||||
#include "stm32f3xx_hal_can.h"
|
||||
|
||||
#include "can-halal.h"
|
||||
#include "stm32f3xx_hal_gpio.h"
|
||||
|
||||
#include <stdint.h>
|
||||
#include <string.h>
|
||||
#include <stdbool.h>
|
||||
|
||||
#define CAN_ID_SLAVE_PANIC 0x009
|
||||
#define CAN_ID_SLAVE_STATUS_BASE 0x080
|
||||
#define CAN_ID_SLAVE_LOG_BASE 0x600
|
||||
|
||||
rx_status_frame rxstate = {};
|
||||
volatile uint8_t canmsg_received = 0;
|
||||
void ams_can_init(CAN_HandleTypeDef* hcan) { ftcan_init(hcan); }
|
||||
|
||||
#define ITER_COUNT 10
|
||||
static uint8_t count = 0;
|
||||
static bool isOn = false;
|
||||
|
||||
void ams_can_send_status() {
|
||||
if (count == ITER_COUNT) {
|
||||
HAL_GPIO_WritePin(STATUS_LED_G_GPIO_Port, STATUS_LED_G_Pin, isOn ? GPIO_PIN_SET : GPIO_PIN_RESET);
|
||||
|
||||
count = 0;
|
||||
isOn = !isOn;
|
||||
} else {
|
||||
count++;
|
||||
}
|
||||
|
||||
static uint8_t data[8];
|
||||
int error = error_data.error_sources != 0;
|
||||
data[0] = eeprom_config.id | (error << 7);
|
||||
data[1] = stateofcharge;
|
||||
uint8_t* ptr = &data[2];
|
||||
uint16_t min_volt = 0xFFFF;
|
||||
uint16_t max_volt = 0;
|
||||
for (size_t i = 0; i < numberofCells; i++) {
|
||||
if (module.cellVoltages[i] < min_volt) {
|
||||
min_volt = module.cellVoltages[i];
|
||||
}
|
||||
if (module.cellVoltages[i] > max_volt) {
|
||||
max_volt = module.cellVoltages[i];
|
||||
}
|
||||
}
|
||||
ptr = ftcan_marshal_unsigned(ptr, min_volt, 2);
|
||||
ptr = ftcan_marshal_unsigned(ptr, max_volt, 2);
|
||||
int16_t max_temp = -0x8000;
|
||||
for (size_t i = 0; i < N_TEMP_SENSORS; i++) {
|
||||
if (tmp1075_temps[i] > max_temp &&
|
||||
(tmp1075_failed_sensors & (1 << i)) == 0) {
|
||||
max_temp = tmp1075_temps[i];
|
||||
}
|
||||
}
|
||||
ftcan_marshal_unsigned(ptr, max_temp, 2);
|
||||
uint16_t id = CAN_ID_SLAVE_STATUS_BASE | eeprom_config.id;
|
||||
ftcan_transmit(id, data, sizeof(data));
|
||||
}
|
||||
|
||||
void ams_can_send_error() {
|
||||
static uint8_t data[6];
|
||||
data[0] = eeprom_config.id;
|
||||
data[1] = error_data.data_kind;
|
||||
memcpy(&data[2], error_data.data, 4);
|
||||
ftcan_transmit(CAN_ID_SLAVE_PANIC, data, sizeof(data));
|
||||
}
|
||||
|
||||
void ams_can_send_log() {
|
||||
static uint8_t call_count = 0;
|
||||
static uint8_t data[8];
|
||||
|
||||
uint16_t can_addr =
|
||||
CAN_ID_SLAVE_LOG_BASE | (eeprom_config.id << 4) | call_count;
|
||||
uint8_t* ptr = &data[0];
|
||||
|
||||
if (call_count < N_CELLS / 4) {
|
||||
for (size_t i = 0; i < 4; i++) {
|
||||
size_t offset = call_count * 4;
|
||||
ptr = ftcan_marshal_unsigned(ptr, module.cellVoltages[offset + i], 2);
|
||||
}
|
||||
ftcan_transmit(can_addr, data, sizeof(data));
|
||||
} else if (call_count == N_CELLS / 4) {
|
||||
// Send last cell & failed temperature sensors
|
||||
ptr = ftcan_marshal_unsigned(ptr, module.cellVoltages[N_CELLS - 1], 2);
|
||||
ptr = ftcan_marshal_unsigned(ptr, tmp1075_failed_sensors, 4);
|
||||
ftcan_transmit(can_addr, data, 6);
|
||||
} else {
|
||||
size_t offset = (call_count - N_CELLS / 4 - 1) * 8;
|
||||
for (size_t i = 0; i < 8; i++) {
|
||||
data[i] = tmp1075_temps[offset + i] >> 4;
|
||||
}
|
||||
ftcan_transmit(can_addr, data, sizeof(data));
|
||||
}
|
||||
call_count = (call_count + 1) % (N_CELLS / 4 + 1 + N_TEMP_SENSORS / 8);
|
||||
}
|
||||
@ -6,14 +6,7 @@
|
||||
*/
|
||||
|
||||
#include "AMS_HighLevel.h"
|
||||
#include "ADBMS_Abstraction.h"
|
||||
#include "ADBMS_LL_Driver.h"
|
||||
#include "AMS_CAN.h"
|
||||
#include "TMP1075.h"
|
||||
#include "can-halal.h"
|
||||
#include "errors.h"
|
||||
#include "stm32f3xx_hal.h"
|
||||
#include <stdint.h>
|
||||
|
||||
|
||||
Cell_Module module = {};
|
||||
uint32_t balancedCells = 0;
|
||||
|
||||
41
Core/Src/PWM_control.c
Normal file
41
Core/Src/PWM_control.c
Normal file
@ -0,0 +1,41 @@
|
||||
#include "PWM_control.h"
|
||||
|
||||
uint8_t battery_cooling_status;
|
||||
//uint32_t powerground1_CCR, powerground2_CCR, battery_cooling_CCR;
|
||||
|
||||
TIM_HandleTypeDef* powerground, *battery_cooling;
|
||||
|
||||
/*
|
||||
Pulse width modulation mode allows for generating a signal with a frequency determined by
|
||||
the value of the TIMx_ARR register and a duty cycle determined by the value of the TIMx_CCRx register.
|
||||
*/
|
||||
|
||||
void PWM_control_init(TIM_HandleTypeDef* pg, TIM_HandleTypeDef* bat_cool){
|
||||
powerground_status = 0;
|
||||
battery_cooling_status = 0;
|
||||
|
||||
HAL_TIM_PWM_Start(pg, TIM_CHANNEL_1); //TIM15CH1
|
||||
HAL_TIM_PWM_Start(pg, TIM_CHANNEL_2); //TIM15CH2
|
||||
HAL_TIM_PWM_Start(bat_cool, TIM_CHANNEL_3); //TIM1CH3
|
||||
|
||||
powerground = pg;
|
||||
battery_cooling = bat_cool;
|
||||
__HAL_TIM_SET_COMPARE(powerground, TIM_CHANNEL_1, 2000);
|
||||
__HAL_TIM_SET_COMPARE(powerground, TIM_CHANNEL_2, 2000);
|
||||
//__HAL_TIM_SET_COMPARE(battery_cooling, TIM_CHANNEL_3, 2000);
|
||||
}
|
||||
|
||||
/*
|
||||
controls the duty cycle of the fans by setting the CCR of the channel percent/100 = x/ARR
|
||||
*/
|
||||
void PWM_powerground_control(uint8_t percent){
|
||||
if (percent > 100) //something went wrong
|
||||
return;
|
||||
powerground_status = percent;
|
||||
int ccr = 2000 + ((2000) * (percent/100.0));
|
||||
__HAL_TIM_SET_COMPARE(powerground, TIM_CHANNEL_1, ccr);
|
||||
__HAL_TIM_SET_COMPARE(powerground, TIM_CHANNEL_2, 2000 + ((2000) * (percent/100.0)));
|
||||
//TIM15->CCR1 = (TIM15->ARR*POWERGROUND_MAX_DUTY_CYCLE-TIM15->ARR*POWERGROUND_MIN_DUTY_CYCLE) * (percent/100.0) + TIM15->ARR*POWERGROUND_MIN_DUTY_CYCLE;
|
||||
}
|
||||
|
||||
void PWM_battery_cooling_control(uint8_t percent){}
|
||||
@ -1,11 +1,5 @@
|
||||
#include "TMP1075.h"
|
||||
|
||||
#include "can-halal.h"
|
||||
|
||||
#include "errors.h"
|
||||
#include "stm32f3xx_hal_def.h"
|
||||
#include "stm32f3xx_hal_i2c.h"
|
||||
|
||||
#define MAX_TEMP ((int16_t)(59 / 0.0625f))
|
||||
#define MAX_FAILED_TEMP 12 //TODO: change value for compliance with the actual number of sensors
|
||||
#warning "change value for compliance with the actual number of sensors"
|
||||
|
||||
150
Core/Src/can.c
Normal file
150
Core/Src/can.c
Normal file
@ -0,0 +1,150 @@
|
||||
/*
|
||||
* can.c
|
||||
* Created on: Mai 23, 2024
|
||||
* Author: Hamza
|
||||
*/
|
||||
|
||||
#include "can.h"
|
||||
|
||||
//#define CAN_ID_IN 0x501
|
||||
//#define CAN_ID_OUT 0x502
|
||||
int can_delay_manager = 0;
|
||||
void can_init(CAN_HandleTypeDef* hcan) {
|
||||
ftcan_init(hcan);
|
||||
ftcan_add_filter(CAN_ID_IN, 0xFFF);
|
||||
}
|
||||
|
||||
/*
|
||||
This function sends the status of the mvbms, the battery and of powerground.
|
||||
once every 1s in states: INACTIVE, PRECHARGE, DISCHARGE, CHARGING, ERROR.
|
||||
once every 0.5s in states: READY, ACTIVE.
|
||||
with format of:
|
||||
CAN Messages:
|
||||
Error bit
|
||||
MVBMS state
|
||||
Powerground Status 0-100%
|
||||
Errors
|
||||
Battery state of charge
|
||||
Pack Voltage
|
||||
Current
|
||||
Battery temperature (12 bit)
|
||||
|
||||
Min/Max. Cell Temp (ID, Min Temp, ID, Max Temp)(3B),
|
||||
Min/Max Cell Voltage (ID, Min Voltage, ID, Max Voltage)(3B)
|
||||
|
||||
bit 0 (1b): empty
|
||||
bit 1-3 (3b): state
|
||||
bit 4-11 (8b): powerground status
|
||||
bit 12-19 (8b): error
|
||||
bit 20-27 (8b): state of charge from 0-100%
|
||||
bit 28-39 (12b): battery voltage
|
||||
bit 40-51 (12b): current measurement
|
||||
bit 52-63 (12b): temperature of the cell with highest temperature
|
||||
|
||||
|
||||
bit 0-3 (4b): ID of the sensor with highest temperature
|
||||
bit 4-7 (4b): ID of the sensor with lowest temperataure
|
||||
bit 8-19 (12b): temperature of the coldest cell
|
||||
bit 20-23 (4b): ID of the cell with the lowest voltage
|
||||
bit 24-35 (12b): lowest cell voltage
|
||||
bit 36-39 (4b): ID of the cell the the highest voltage
|
||||
bit 40-51 (12b): highest cell voltage
|
||||
bit 52-63 (12b): empty
|
||||
*/
|
||||
|
||||
void can_handle_send_status() {
|
||||
if (can_delay_manager > HAL_GetTick())
|
||||
return;
|
||||
else
|
||||
can_delay_manager = HAL_GetTick() + CAN_STATUS_FREQ;
|
||||
|
||||
uint8_t data[8] = {};
|
||||
int8_t id_highest_temp = -1;
|
||||
int16_t highest_temp = INT16_MIN;
|
||||
sm_check_battery_temperature(&id_highest_temp, &highest_temp);
|
||||
|
||||
data[0] = ((state.current_state << 4) | (powerground_status >> 4)); // 1 bit emptyy | 3 bit state | 4 bit powerground
|
||||
data[1] = ((powerground_status << 4) | (state.error_source >> 4)); // 4 bit powerground | 4 bit error
|
||||
data[2] = ((state.error_source << 4) | (0)); // 4 bit error | 4 bit state of charge
|
||||
data[3] = ((0) + (RELAY_BAT_SIDE_VOLTAGE >> 12)); // 4 bit state of charge | 4 bit battery voltage
|
||||
data[4] = ((RELAY_BAT_SIDE_VOLTAGE >> 4));
|
||||
data[5] = ((CURRENT_MEASUREMENT >> 8));
|
||||
data[6] = ((CURRENT_MEASUREMENT & 0x00F0) | (highest_temp >> 12));
|
||||
data[7] = ((highest_temp) >> 4);
|
||||
|
||||
ftcan_transmit(CAN_ID_OUT, data, sizeof(data));
|
||||
|
||||
int8_t id_lowest_temp = -1;
|
||||
int16_t lowest_temp = INT16_MIN;
|
||||
for (int i = 0; i < N_TEMP_SENSORS; i++) {
|
||||
if (tmp1075_temps[i] < lowest_temp){
|
||||
id_lowest_temp = i;
|
||||
lowest_temp = tmp1075_temps[i];
|
||||
}
|
||||
}
|
||||
|
||||
int8_t id_lowest_volt = -1;
|
||||
int16_t lowest_volt = INT16_MIN;
|
||||
int8_t id_highest_volt = -1;
|
||||
int16_t highest_volt = INT16_MIN;
|
||||
|
||||
for (int i = 0; i < module.sumOfCellMeasurements; i++) {
|
||||
if (sm_return_cell_voltage(i) < lowest_temp){
|
||||
id_lowest_volt = i;
|
||||
lowest_volt = sm_return_cell_voltage(i);
|
||||
}
|
||||
if (sm_return_cell_voltage(i) > highest_temp){
|
||||
id_highest_volt = i;
|
||||
highest_volt = sm_return_cell_voltage(i);
|
||||
}
|
||||
}
|
||||
|
||||
data[0] = ((id_highest_temp & 0x0F) << 4 | (id_lowest_temp & 0x0F));
|
||||
data[1] = ((lowest_temp) >> 8);
|
||||
data[2] = ((lowest_temp & 0x00F0) | (id_lowest_volt & 0x0F));
|
||||
data[3] = (lowest_volt >> 8);
|
||||
data[4] = ((lowest_volt & 0x00F0) | (id_highest_volt & 0x0F));
|
||||
data[5] = ((highest_volt >> 8));
|
||||
data[6] = ((highest_volt & 0x00F0));
|
||||
data[7] = 0;
|
||||
|
||||
ftcan_transmit(CAN_ID_OUT, data, sizeof(data));
|
||||
}
|
||||
|
||||
/*
|
||||
can_handle_recieve_command() should only check if the message is valid and then hand it
|
||||
to the sm_handle_ams_in() which handles the state machine transition.
|
||||
|
||||
This function recieves a command from the Autobox with the CAN ID of 0x501.
|
||||
with format of:
|
||||
data[0] = target state
|
||||
0x0 STATE_INACTIVE | disconnect power to the ESC of powerground. Send it to return the mvbms to idle/monitoring mode. If data[1] != 0 -> assume bad CAN message.
|
||||
0x1 STATE_READY | conneect power to the ESC of powerground and but with no PWM signal. If data[1] != 0 -> assume bad CAN message.
|
||||
0x2 STATE_ACTIVE | activate powerground at (data[1]) percent. If data[1] > 100 -> assume bad CAN message.
|
||||
|
||||
allowed transitions:
|
||||
STATE_INACTIVE -> STATE_READY
|
||||
STATE_READY -> STATE_INACTIVE, STATE_ACTIVE
|
||||
STATE_ACTIVE -> STATE_INACTIVE, STATE_READY
|
||||
*/
|
||||
void can_handle_recieve_command(const uint8_t *data){
|
||||
if (data[0] == 0x00 && data[1] == 0x00){
|
||||
sm_handle_ams_in(data);
|
||||
} else if (data[0] == 0x01 && data[1] == 0x00){
|
||||
sm_handle_ams_in(data);
|
||||
} else if (data[0] == 0x02 && data[1] <= 100) {
|
||||
sm_handle_ams_in(data);
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
implements the _weak method ftcan_msg_recieved_cb() which throws an interrupt when a CAN message is recieved.
|
||||
it only checks if the id is and datalen is correct thans hands data over to can_handle_recieve_command().
|
||||
|
||||
in MXCUBE under CAN NVIC settings "USB low priority or CAN_RX0 interrupts" has to be on
|
||||
*/
|
||||
void ftcan_msg_received_cb(uint16_t id, size_t datalen, const uint8_t *data){
|
||||
if (id == 0x501 && datalen == 2){
|
||||
can_handle_recieve_command(data);
|
||||
}
|
||||
}
|
||||
@ -1,55 +0,0 @@
|
||||
#include "eeprom.h"
|
||||
#include "errors.h"
|
||||
#include "stm32f3xx_hal.h"
|
||||
#include "stm32f3xx_hal_exti.h"
|
||||
#include "stm32f3xx_hal_i2c.h"
|
||||
|
||||
#include <string.h>
|
||||
|
||||
#define EEPROM_I2C_ADDR 0xA0
|
||||
// Don't use the beginning of the EEPROM, since the testbench writes there
|
||||
#define EEPROM_CONFIG_BASE 0x0100
|
||||
#define EEPROM_CONFIG_ECC_OFFSET 0x20
|
||||
|
||||
EEPROMConfig eeprom_config;
|
||||
|
||||
static I2C_HandleTypeDef* hi2c;
|
||||
|
||||
void eeprom_init(I2C_HandleTypeDef* handle) {
|
||||
hi2c = handle;
|
||||
uint8_t buf[sizeof(EEPROMConfig) * 3];
|
||||
// Read 3 EEPROM config buffers at 32 byte offsets
|
||||
for (size_t ecc_i = 0; ecc_i < 3; ecc_i++) {
|
||||
HAL_I2C_Mem_Read(hi2c, EEPROM_I2C_ADDR,
|
||||
EEPROM_CONFIG_BASE + EEPROM_CONFIG_ECC_OFFSET * ecc_i, 2,
|
||||
buf + sizeof(EEPROMConfig) * ecc_i, sizeof(EEPROMConfig),
|
||||
100);
|
||||
}
|
||||
// ECC
|
||||
for (size_t i = 0; i < sizeof(EEPROMConfig); i++) {
|
||||
uint8_t a = buf[i + sizeof(EEPROMConfig) * 0];
|
||||
uint8_t b = buf[i + sizeof(EEPROMConfig) * 1];
|
||||
uint8_t c = buf[i + sizeof(EEPROMConfig) * 2];
|
||||
if (a == b || a == c) {
|
||||
buf[i] = a;
|
||||
} else if (b == c) {
|
||||
buf[i] = b;
|
||||
} else {
|
||||
set_error_source(ERROR_SOURCE_EEPROM);
|
||||
}
|
||||
}
|
||||
|
||||
memcpy(&eeprom_config, buf, sizeof(EEPROMConfig));
|
||||
// Write back config
|
||||
eeprom_config.id = 10;
|
||||
eeprom_config_save();
|
||||
}
|
||||
|
||||
void eeprom_config_save() {
|
||||
for (size_t ecc_i = 0; ecc_i < 3; ecc_i++) {
|
||||
HAL_I2C_Mem_Write(hi2c, EEPROM_I2C_ADDR,
|
||||
EEPROM_CONFIG_BASE + EEPROM_CONFIG_ECC_OFFSET * ecc_i, 2,
|
||||
(uint8_t*)&eeprom_config, sizeof(eeprom_config), 100);
|
||||
HAL_Delay(100);
|
||||
}
|
||||
}
|
||||
104
Core/Src/main.c
104
Core/Src/main.c
@ -23,15 +23,15 @@
|
||||
/* USER CODE BEGIN Includes */
|
||||
#include "ADBMS_Abstraction.h"
|
||||
#include "ADBMS_CMD_MAKROS.h"
|
||||
#include "AMS_CAN.h"
|
||||
#include "PWM_control.h"
|
||||
#include "can.h"
|
||||
#include "AMS_HighLevel.h"
|
||||
#include "state_machine.h"
|
||||
#include "TMP1075.h"
|
||||
#include "eeprom.h"
|
||||
#include "errors.h"
|
||||
#include "stm32f302xc.h"
|
||||
#include "stm32f3xx_hal.h"
|
||||
#include "stm32f3xx_hal_gpio.h"
|
||||
#include <stdbool.h>
|
||||
|
||||
#include "stm32f3xx_hal_tim.h"
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
@ -119,14 +119,12 @@ int main(void)
|
||||
MX_TIM1_Init();
|
||||
MX_TIM2_Init();
|
||||
/* USER CODE BEGIN 2 */
|
||||
sm_init();
|
||||
tmp1075_init(&hi2c1);
|
||||
AMS_Init(&hspi1);
|
||||
ams_can_init(&hcan);
|
||||
|
||||
bool relay_actual = false;
|
||||
bool relay_target = true;
|
||||
|
||||
uint32_t target_time = HAL_GetTick() + 10000;
|
||||
can_init(&hcan);
|
||||
PWM_control_init(&htim15, &htim1);
|
||||
HAL_Delay(10);
|
||||
/* USER CODE END 2 */
|
||||
|
||||
/* Infinite loop */
|
||||
@ -137,23 +135,9 @@ int main(void)
|
||||
|
||||
/* USER CODE BEGIN 3 */
|
||||
AMS_Loop();
|
||||
|
||||
ams_can_send_status();
|
||||
if (error_data.error_sources &&
|
||||
HAL_GetTick() - error_data.errors_since >= ERROR_TIME_THRESH) {
|
||||
ams_can_send_error();
|
||||
}
|
||||
ams_can_send_log();
|
||||
|
||||
if (HAL_GetTick() >= target_time) {
|
||||
HAL_GPIO_WritePin(RELAY_EN_GPIO_Port, RELAY_EN_Pin, relay_target ? GPIO_PIN_SET : GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(STATUS_LED_R_GPIO_Port, STATUS_LED_R_Pin, relay_target ? GPIO_PIN_RESET : GPIO_PIN_SET);
|
||||
target_time = HAL_GetTick() + 10000;
|
||||
relay_target = !relay_target;
|
||||
ChannelControl_UpdatePWMs( x.pwrgndfans )
|
||||
|
||||
);
|
||||
}
|
||||
sm_update();
|
||||
//sm_test_cycle_states();
|
||||
can_handle_send_status();
|
||||
}
|
||||
/* USER CODE END 3 */
|
||||
}
|
||||
@ -171,12 +155,11 @@ void SystemClock_Config(void)
|
||||
/** Initializes the RCC Oscillators according to the specified parameters
|
||||
* in the RCC_OscInitTypeDef structure.
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_HSE;
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||||
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
||||
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
|
||||
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL4;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
@ -186,7 +169,7 @@ void SystemClock_Config(void)
|
||||
*/
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|
||||
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSE;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
||||
@ -222,15 +205,15 @@ static void MX_CAN_Init(void)
|
||||
|
||||
/* USER CODE END CAN_Init 1 */
|
||||
hcan.Instance = CAN;
|
||||
hcan.Init.Prescaler = 16;
|
||||
hcan.Init.Prescaler = 2;
|
||||
hcan.Init.Mode = CAN_MODE_NORMAL;
|
||||
hcan.Init.SyncJumpWidth = CAN_SJW_1TQ;
|
||||
hcan.Init.TimeSeg1 = CAN_BS1_1TQ;
|
||||
hcan.Init.TimeSeg2 = CAN_BS2_1TQ;
|
||||
hcan.Init.TimeSeg1 = CAN_BS1_13TQ;
|
||||
hcan.Init.TimeSeg2 = CAN_BS2_2TQ;
|
||||
hcan.Init.TimeTriggeredMode = DISABLE;
|
||||
hcan.Init.AutoBusOff = DISABLE;
|
||||
hcan.Init.AutoBusOff = ENABLE;
|
||||
hcan.Init.AutoWakeUp = DISABLE;
|
||||
hcan.Init.AutoRetransmission = DISABLE;
|
||||
hcan.Init.AutoRetransmission = ENABLE;
|
||||
hcan.Init.ReceiveFifoLocked = DISABLE;
|
||||
hcan.Init.TransmitFifoPriority = DISABLE;
|
||||
if (HAL_CAN_Init(&hcan) != HAL_OK)
|
||||
@ -418,14 +401,15 @@ static void MX_TIM2_Init(void)
|
||||
|
||||
/* USER CODE BEGIN TIM2_Init 1 */
|
||||
|
||||
/* USER CODE END TIM2_Init 1 */
|
||||
htim2.Instance = TIM2;
|
||||
htim2.Init.Prescaler = 0;
|
||||
htim2.Init.CounterMode = TIM_COUNTERMODE_UP;
|
||||
htim2.Init.Period = 65535;
|
||||
htim2.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
|
||||
htim2.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
|
||||
if (HAL_TIM_PWM_Init(&htim2) != HAL_OK)
|
||||
/* USER CODE END TIM15_Init 1 */
|
||||
htim15.Instance = TIM15;
|
||||
htim15.Init.Prescaler = 7;
|
||||
htim15.Init.CounterMode = TIM_COUNTERMODE_UP;
|
||||
htim15.Init.Period = 39999;
|
||||
htim15.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
|
||||
htim15.Init.RepetitionCounter = 0;
|
||||
htim15.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
|
||||
if (HAL_TIM_PWM_Init(&htim15) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
@ -509,7 +493,7 @@ static void MX_GPIO_Init(void)
|
||||
HAL_GPIO_WritePin(GPIOB, STATUS_LED_R_Pin|STATUS_LED_B_Pin|STATUS_LED_G_Pin, GPIO_PIN_SET);
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(GPIOB, PRECHARGE_EN_Pin|AUX_IN_Pin, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(PRECHARGE_EN_GPIO_Port, PRECHARGE_EN_Pin, GPIO_PIN_RESET);
|
||||
|
||||
/*Configure GPIO pins : PC13 PC14 PC15 */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15;
|
||||
@ -524,35 +508,21 @@ static void MX_GPIO_Init(void)
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pin : PA3 */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_3;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pins : STATUS_LED_R_Pin STATUS_LED_B_Pin STATUS_LED_G_Pin PRECHARGE_EN_Pin
|
||||
AUX_IN_Pin */
|
||||
GPIO_InitStruct.Pin = STATUS_LED_R_Pin|STATUS_LED_B_Pin|STATUS_LED_G_Pin|PRECHARGE_EN_Pin
|
||||
|AUX_IN_Pin;
|
||||
/*Configure GPIO pins : STATUS_LED_R_Pin STATUS_LED_B_Pin STATUS_LED_G_Pin PRECHARGE_EN_Pin */
|
||||
GPIO_InitStruct.Pin = STATUS_LED_R_Pin|STATUS_LED_B_Pin|STATUS_LED_G_Pin|PRECHARGE_EN_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pins : PB10 PB12 PB4 PB5
|
||||
PB8 */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_10|GPIO_PIN_12|GPIO_PIN_4|GPIO_PIN_5
|
||||
|GPIO_PIN_8;
|
||||
/*Configure GPIO pins : PB10 PB12 PB13 PB14
|
||||
PB4 PB5 PB8 */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_10|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14
|
||||
|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_8;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pin : AUX_OUT_Pin */
|
||||
GPIO_InitStruct.Pin = AUX_OUT_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(AUX_OUT_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pins : RELAY_BATT_SIDE_ON_Pin RELAY_ESC_SIDE_ON_Pin CURRENT_SENSOR_ON_Pin */
|
||||
GPIO_InitStruct.Pin = RELAY_BATT_SIDE_ON_Pin|RELAY_ESC_SIDE_ON_Pin|CURRENT_SENSOR_ON_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
|
||||
326
Core/Src/state_machine.c
Normal file
326
Core/Src/state_machine.c
Normal file
@ -0,0 +1,326 @@
|
||||
#include "state_machine.h"
|
||||
#include "AMS_HighLevel.h"
|
||||
#include "TMP1075.h"
|
||||
#include "errors.h"
|
||||
#include "stm32f3xx_hal.h"
|
||||
#include <stdint.h>
|
||||
#include <stdio.h>
|
||||
|
||||
StateHandle state;
|
||||
int16_t RELAY_BAT_SIDE_VOLTAGE;
|
||||
int16_t RELAY_ESC_SIDE_VOLTAGE;
|
||||
int16_t CURRENT_MEASUREMENT;
|
||||
uint8_t powerground_status;
|
||||
|
||||
uint32_t timestamp;
|
||||
|
||||
void sm_init(){
|
||||
state.current_state = STATE_INACTIVE;
|
||||
state.target_state = STATE_INACTIVE;
|
||||
state.error_source = 0;
|
||||
}
|
||||
|
||||
void sm_update(){
|
||||
sm_check_errors();
|
||||
|
||||
RELAY_BAT_SIDE_VOLTAGE = module.auxVoltages[0] * 12.42; // the calculation says the factor is 11.989. 12.42 yields the better result
|
||||
RELAY_ESC_SIDE_VOLTAGE = module.auxVoltages[1] * 12.42;
|
||||
CURRENT_MEASUREMENT = (module.auxVoltages[2] - 2496) * 300;
|
||||
|
||||
switch (state.current_state) {
|
||||
case STATE_INACTIVE:
|
||||
state.current_state = sm_update_inactive(); // monitor only
|
||||
break;
|
||||
case STATE_PRECHARGE:
|
||||
state.current_state = sm_update_precharge(); // set PRECHARGE and turn on cooling at 50% or such
|
||||
break;
|
||||
case STATE_READY:
|
||||
state.current_state = sm_update_ready(); // keep cooling at 50%, get ready to turn on powerground
|
||||
break;
|
||||
case STATE_ACTIVE:
|
||||
state.current_state = sm_update_active(); // set PRECHARGE and turn on cooling at 50% or such
|
||||
break;
|
||||
case STATE_DISCHARGE:
|
||||
state.current_state = sm_update_discharge(); // open the main relay, keep PRECHARGE closed
|
||||
break;
|
||||
case STATE_CHARGING_PRECHARGE:
|
||||
state.current_state = sm_update_charging_precharge();
|
||||
break;
|
||||
case STATE_CHARGING:
|
||||
state.current_state = sm_update_charging(); // monitor and turn on cooling if needed.
|
||||
break;
|
||||
case STATE_ERROR:
|
||||
state.current_state = sm_update_error(); // enter the correct ERROR state
|
||||
break;
|
||||
}
|
||||
|
||||
sm_set_relay_positions(state.current_state);
|
||||
state.target_state = state.current_state;
|
||||
}
|
||||
|
||||
State sm_update_inactive(){
|
||||
switch (state.target_state) {
|
||||
case STATE_PRECHARGE:
|
||||
return STATE_PRECHARGE;
|
||||
case STATE_CHARGING_PRECHARGE:
|
||||
return STATE_CHARGING_PRECHARGE;
|
||||
default:
|
||||
return STATE_INACTIVE;
|
||||
}
|
||||
}
|
||||
|
||||
State sm_update_precharge(){
|
||||
switch (state.target_state) {
|
||||
case STATE_INACTIVE: // if CAN Signal 0000 0000 then immidiete shutdown
|
||||
return STATE_DISCHARGE;
|
||||
case STATE_PRECHARGE:
|
||||
if (RELAY_BAT_SIDE_VOLTAGE-RELAY_ESC_SIDE_VOLTAGE < 100)
|
||||
return STATE_READY;
|
||||
break;
|
||||
case STATE_DISCHARGE:
|
||||
return STATE_DISCHARGE;
|
||||
default:
|
||||
return STATE_PRECHARGE;
|
||||
}
|
||||
}
|
||||
|
||||
State sm_update_ready(){
|
||||
switch (state.target_state) {
|
||||
case STATE_ACTIVE: // if CAN Signal 1100 0000 then turn on powerground
|
||||
return STATE_ACTIVE;
|
||||
case STATE_DISCHARGE: // if CAN Signal 0000 0000 then shutdown
|
||||
return STATE_DISCHARGE;
|
||||
default:
|
||||
return STATE_READY;
|
||||
}
|
||||
}
|
||||
|
||||
State sm_update_active(){
|
||||
switch (state.target_state) {
|
||||
case STATE_READY: // if CAN Signal 1000 0000 then turn oof powerground but stay ready
|
||||
return STATE_READY;
|
||||
case STATE_DISCHARGE: // if CAN Signal 0000 0000 then shutdown
|
||||
return STATE_DISCHARGE;
|
||||
default:
|
||||
return STATE_ACTIVE;
|
||||
}
|
||||
}
|
||||
|
||||
State sm_update_discharge(){
|
||||
switch (state.target_state) {
|
||||
case STATE_DISCHARGE:
|
||||
if (RELAY_ESC_SIDE_VOLTAGE < 5000)
|
||||
return STATE_INACTIVE;
|
||||
case STATE_PRECHARGE: // if CAN Signal 1000 0000 then get ready
|
||||
return STATE_PRECHARGE;
|
||||
default:
|
||||
return STATE_DISCHARGE;
|
||||
}
|
||||
}
|
||||
|
||||
State sm_update_charging_precharge(){
|
||||
switch (state.target_state) {
|
||||
case STATE_CHARGING:
|
||||
return STATE_CHARGING;
|
||||
case STATE_DISCHARGE:
|
||||
return STATE_DISCHARGE;
|
||||
default:
|
||||
return STATE_CHARGING_PRECHARGE;
|
||||
}
|
||||
}
|
||||
|
||||
State sm_update_charging(){
|
||||
switch (state.target_state) {
|
||||
case STATE_DISCHARGE:
|
||||
return STATE_DISCHARGE;
|
||||
default:
|
||||
return STATE_CHARGING;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
State sm_update_error(){
|
||||
switch (state.target_state) {
|
||||
case STATE_DISCHARGE:
|
||||
return STATE_DISCHARGE;
|
||||
default:
|
||||
return STATE_ERROR;
|
||||
}
|
||||
}
|
||||
|
||||
void sm_set_relay_positions(State current_state){
|
||||
switch (state.current_state) {
|
||||
case STATE_INACTIVE:
|
||||
sm_set_relay(RELAY_MAIN, 0);
|
||||
sm_set_relay(RELAY_PRECHARGE, 0);
|
||||
break;
|
||||
case STATE_PRECHARGE:
|
||||
sm_set_relay(RELAY_MAIN, 0);
|
||||
sm_set_relay(RELAY_PRECHARGE, 1);
|
||||
break;
|
||||
case STATE_READY:
|
||||
sm_set_relay(RELAY_MAIN, 1);
|
||||
sm_set_relay(RELAY_PRECHARGE, 0);
|
||||
break;
|
||||
case STATE_ACTIVE:
|
||||
sm_set_relay(RELAY_MAIN, 1);
|
||||
sm_set_relay(RELAY_PRECHARGE, 0);
|
||||
break;
|
||||
case STATE_DISCHARGE:
|
||||
sm_set_relay(RELAY_MAIN, 0);
|
||||
sm_set_relay(RELAY_PRECHARGE, 0);
|
||||
break;
|
||||
case STATE_CHARGING_PRECHARGE:
|
||||
sm_set_relay(RELAY_MAIN, 0);
|
||||
sm_set_relay(RELAY_PRECHARGE, 1);
|
||||
break;
|
||||
case STATE_CHARGING:
|
||||
sm_set_relay(RELAY_MAIN, 1);
|
||||
sm_set_relay(RELAY_PRECHARGE, 0);
|
||||
break;
|
||||
case STATE_ERROR:
|
||||
sm_set_relay(RELAY_MAIN, 0);
|
||||
sm_set_relay(RELAY_PRECHARGE, 0);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
void sm_set_relay(Relay relay, bool closed){
|
||||
GPIO_PinState state = closed ? GPIO_PIN_SET : GPIO_PIN_RESET;
|
||||
switch (relay) {
|
||||
case RELAY_MAIN:
|
||||
HAL_GPIO_WritePin(RELAY_EN_GPIO_Port, RELAY_EN_Pin, state);
|
||||
relay_closed = closed;
|
||||
break;
|
||||
case RELAY_PRECHARGE:
|
||||
HAL_GPIO_WritePin(PRECHARGE_EN_GPIO_Port, PRECHARGE_EN_Pin, state);
|
||||
precharge_closed = closed;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
void sm_check_charging(){
|
||||
if (RELAY_BAT_SIDE_VOLTAGE < RELAY_ESC_SIDE_VOLTAGE && timestamp == 0)
|
||||
timestamp = HAL_GetTick() + 5000;
|
||||
if (timestamp < HAL_GetTick())
|
||||
state.target_state = STATE_CHARGING_PRECHARGE;
|
||||
}
|
||||
|
||||
/* returns the ID and temperature of the hottest cell */
|
||||
void sm_check_battery_temperature(int8_t *id, int16_t *temp){
|
||||
for (int i = 0; i < N_TEMP_SENSORS; i++) {
|
||||
if (tmp1075_temps[i] > *temp){
|
||||
*id = i;
|
||||
*temp = tmp1075_temps[i];
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
int16_t sm_return_cell_temperature(int id){
|
||||
return tmp1075_temps[id];
|
||||
}
|
||||
|
||||
int16_t sm_return_cell_voltage(int id){
|
||||
return module.cellVoltages[id];
|
||||
}
|
||||
|
||||
void sm_handle_ams_in(const uint8_t *data){
|
||||
switch (data[0]) {
|
||||
case 0x00:
|
||||
if (state.current_state != STATE_INACTIVE){
|
||||
PWM_powerground_control(0);
|
||||
state.target_state = STATE_DISCHARGE;
|
||||
}
|
||||
break;
|
||||
case 0x01:
|
||||
if (state.target_state == STATE_INACTIVE || state.target_state == STATE_DISCHARGE){
|
||||
PWM_powerground_control(0);
|
||||
state.target_state = STATE_PRECHARGE;
|
||||
} else if (state.target_state == STATE_ACTIVE){
|
||||
PWM_powerground_control(0);
|
||||
state.target_state = STATE_READY;
|
||||
}
|
||||
break;
|
||||
case 0x02:
|
||||
if (state.current_state == STATE_READY){
|
||||
PWM_powerground_control(data[1]);
|
||||
state.target_state = STATE_ACTIVE; // READY -> ACTIVE
|
||||
}
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
void sm_set_error(ErrorKind error_kind, bool is_errored){}
|
||||
|
||||
#warning TODO: add error checking for everything here
|
||||
void sm_check_errors(){
|
||||
switch (error_data.data_kind) {
|
||||
case SEK_OVERTEMP:
|
||||
case SEK_UNDERTEMP:
|
||||
case SEK_TOO_FEW_TEMPS:
|
||||
state.error_type.temperature_error = 1;
|
||||
case SEK_OVERVOLT:
|
||||
case SEK_UNDERVOLT:
|
||||
case SEK_OPENWIRE:
|
||||
case SEK_EEPROM_ERR:
|
||||
case SEK_INTERNAL_BMS_TIMEOUT:
|
||||
state.error_type.bms_timeout = 1;
|
||||
case SEK_INTERNAL_BMS_CHECKSUM_FAIL:
|
||||
case SEK_INTERNAL_BMS_OVERTEMP:
|
||||
case SEK_INTERNAL_BMS_FAULT:
|
||||
state.error_type.bms_fault = 1;
|
||||
break;
|
||||
}
|
||||
|
||||
if (1){
|
||||
state.error_type.current_error = 1;
|
||||
}
|
||||
|
||||
if (1){
|
||||
state.error_type.current_sensor_missing = 1;
|
||||
}
|
||||
|
||||
if (RELAY_BAT_SIDE_VOLTAGE < 30000){
|
||||
state.error_type.voltage_error = 1;
|
||||
}
|
||||
|
||||
if (1){
|
||||
state.error_type.voltage_missing = 1;
|
||||
}
|
||||
}
|
||||
|
||||
void sm_test_cycle_states(){
|
||||
RELAY_BAT_SIDE_VOLTAGE = module.auxVoltages[0];
|
||||
RELAY_ESC_SIDE_VOLTAGE = module.auxVoltages[1];
|
||||
CURRENT_MEASUREMENT = module.auxVoltages[2];
|
||||
sm_set_relay_positions(state.current_state);
|
||||
|
||||
if (timestamp > HAL_GetTick())
|
||||
return;
|
||||
switch (state.current_state) {
|
||||
case STATE_INACTIVE:
|
||||
state.current_state = STATE_PRECHARGE;
|
||||
timestamp = HAL_GetTick() + 30000;
|
||||
PWM_powerground_control(0);
|
||||
break;
|
||||
case STATE_PRECHARGE:
|
||||
state.current_state = STATE_READY;
|
||||
timestamp = HAL_GetTick() + 10000;
|
||||
break;
|
||||
case STATE_READY:
|
||||
state.current_state = STATE_ACTIVE;
|
||||
timestamp = HAL_GetTick() + 10000;
|
||||
break;
|
||||
case STATE_ACTIVE:
|
||||
state.current_state = STATE_DISCHARGE;
|
||||
timestamp = HAL_GetTick() + 10000;
|
||||
PWM_powerground_control(1);
|
||||
break;
|
||||
case STATE_DISCHARGE:
|
||||
state.current_state = STATE_INACTIVE;
|
||||
timestamp = HAL_GetTick() + 10000;
|
||||
break;
|
||||
}
|
||||
|
||||
state.target_state = state.current_state;
|
||||
}
|
||||
@ -108,6 +108,11 @@ void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan)
|
||||
GPIO_InitStruct.Alternate = GPIO_AF9_CAN;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
/* CAN interrupt Init */
|
||||
HAL_NVIC_SetPriority(USB_LP_CAN_RX0_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(USB_LP_CAN_RX0_IRQn);
|
||||
HAL_NVIC_SetPriority(CAN_RX1_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(CAN_RX1_IRQn);
|
||||
/* USER CODE BEGIN CAN_MspInit 1 */
|
||||
|
||||
/* USER CODE END CAN_MspInit 1 */
|
||||
@ -137,6 +142,9 @@ void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan)
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_11|GPIO_PIN_12);
|
||||
|
||||
/* CAN interrupt DeInit */
|
||||
HAL_NVIC_DisableIRQ(USB_LP_CAN_RX0_IRQn);
|
||||
HAL_NVIC_DisableIRQ(CAN_RX1_IRQn);
|
||||
/* USER CODE BEGIN CAN_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END CAN_MspDeInit 1 */
|
||||
@ -331,12 +339,12 @@ void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
|
||||
/**TIM1 GPIO Configuration
|
||||
PB15 ------> TIM1_CH3N
|
||||
*/
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_15;
|
||||
GPIO_InitStruct.Pin = PWM_Battery_Cooling_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF4_TIM1;
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
HAL_GPIO_Init(PWM_Battery_Cooling_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN TIM1_MspPostInit 1 */
|
||||
|
||||
|
||||
@ -55,7 +55,7 @@
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/* External variables --------------------------------------------------------*/
|
||||
|
||||
extern CAN_HandleTypeDef hcan;
|
||||
/* USER CODE BEGIN EV */
|
||||
|
||||
/* USER CODE END EV */
|
||||
@ -198,6 +198,34 @@ void SysTick_Handler(void)
|
||||
/* please refer to the startup file (startup_stm32f3xx.s). */
|
||||
/******************************************************************************/
|
||||
|
||||
/**
|
||||
* @brief This function handles USB low priority or CAN_RX0 interrupts.
|
||||
*/
|
||||
void USB_LP_CAN_RX0_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN USB_LP_CAN_RX0_IRQn 0 */
|
||||
|
||||
/* USER CODE END USB_LP_CAN_RX0_IRQn 0 */
|
||||
HAL_CAN_IRQHandler(&hcan);
|
||||
/* USER CODE BEGIN USB_LP_CAN_RX0_IRQn 1 */
|
||||
|
||||
/* USER CODE END USB_LP_CAN_RX0_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles CAN RX1 interrupt.
|
||||
*/
|
||||
void CAN_RX1_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN CAN_RX1_IRQn 0 */
|
||||
|
||||
/* USER CODE END CAN_RX1_IRQn 0 */
|
||||
HAL_CAN_IRQHandler(&hcan);
|
||||
/* USER CODE BEGIN CAN_RX1_IRQn 1 */
|
||||
|
||||
/* USER CODE END CAN_RX1_IRQn 1 */
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
192
Documentation/State machine diagram.drawio
Normal file
192
Documentation/State machine diagram.drawio
Normal file
@ -0,0 +1,192 @@
|
||||
<mxfile host="app.diagrams.net" modified="2024-05-26T20:29:49.256Z" agent="Mozilla/5.0 (X11; Linux x86_64; rv:126.0) Gecko/20100101 Firefox/126.0" etag="129cpu7azo9v42CLPjC2" version="24.4.8" type="device">
|
||||
<diagram name="Page-1" id="1QHtqUjNJOinxrO5YjKP">
|
||||
<mxGraphModel dx="1500" dy="866" grid="1" gridSize="10" guides="0" tooltips="1" connect="0" arrows="0" fold="1" page="1" pageScale="1" pageWidth="827" pageHeight="1169" math="0" shadow="0">
|
||||
<root>
|
||||
<mxCell id="0" />
|
||||
<mxCell id="1" parent="0" />
|
||||
<mxCell id="Uq7C48yd8U4UPNIid9w1-36" value="" style="whiteSpace=wrap;html=1;movable=1;resizable=1;rotatable=1;deletable=1;editable=1;locked=0;connectable=1;glass=0;rounded=0;fillColor=default;" vertex="1" parent="1">
|
||||
<mxGeometry x="80" y="5.684341886080802e-14" width="680" height="720" as="geometry" />
|
||||
</mxCell>
|
||||
<mxCell id="Uq7C48yd8U4UPNIid9w1-2" style="edgeStyle=orthogonalEdgeStyle;rounded=1;orthogonalLoop=1;jettySize=auto;html=1;" edge="1" parent="1" source="Uq7C48yd8U4UPNIid9w1-1" target="Uq7C48yd8U4UPNIid9w1-3">
|
||||
<mxGeometry relative="1" as="geometry">
|
||||
<mxPoint x="420" y="420.00000000000006" as="targetPoint" />
|
||||
</mxGeometry>
|
||||
</mxCell>
|
||||
<mxCell id="Uq7C48yd8U4UPNIid9w1-20" value="CAN Signal: 1000 0000" style="edgeLabel;align=center;verticalAlign=middle;resizable=0;points=[];rounded=1;" vertex="1" connectable="0" parent="Uq7C48yd8U4UPNIid9w1-2">
|
||||
<mxGeometry y="3" relative="1" as="geometry">
|
||||
<mxPoint x="-63" as="offset" />
|
||||
</mxGeometry>
|
||||
</mxCell>
|
||||
<mxCell id="Uq7C48yd8U4UPNIid9w1-13" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=1;orthogonalLoop=1;jettySize=auto;html=1;" edge="1" parent="1" source="Uq7C48yd8U4UPNIid9w1-1" target="Uq7C48yd8U4UPNIid9w1-12">
|
||||
<mxGeometry relative="1" as="geometry">
|
||||
<Array as="points">
|
||||
<mxPoint x="620" y="100.00000000000001" />
|
||||
</Array>
|
||||
</mxGeometry>
|
||||
</mxCell>
|
||||
<mxCell id="Uq7C48yd8U4UPNIid9w1-22" value="RELAY_BAT_SIDE > RELAY_ESC_SIDE
for longer than 5 seconds
" style="edgeLabel;align=center;verticalAlign=middle;resizable=0;points=[];rounded=1;" vertex="1" connectable="0" parent="Uq7C48yd8U4UPNIid9w1-13">
|
||||
<mxGeometry x="-0.513" y="-2" relative="1" as="geometry">
|
||||
<mxPoint x="-22" y="-54" as="offset" />
|
||||
</mxGeometry>
|
||||
</mxCell>
|
||||
<mxCell id="Uq7C48yd8U4UPNIid9w1-1" value="INACTIVE" style="rounded=1;whiteSpace=wrap;html=1;" vertex="1" parent="1">
|
||||
<mxGeometry x="560" y="189.99999999999997" width="120" height="60" as="geometry" />
|
||||
</mxCell>
|
||||
<mxCell id="Uq7C48yd8U4UPNIid9w1-4" style="edgeStyle=orthogonalEdgeStyle;rounded=1;orthogonalLoop=1;jettySize=auto;html=1;" edge="1" parent="1" source="Uq7C48yd8U4UPNIid9w1-3" target="Uq7C48yd8U4UPNIid9w1-5">
|
||||
<mxGeometry relative="1" as="geometry">
|
||||
<mxPoint x="240" y="380.00000000000006" as="targetPoint" />
|
||||
<Array as="points">
|
||||
<mxPoint x="430" y="400.00000000000006" />
|
||||
<mxPoint x="430" y="400.00000000000006" />
|
||||
</Array>
|
||||
</mxGeometry>
|
||||
</mxCell>
|
||||
<mxCell id="Uq7C48yd8U4UPNIid9w1-35" value="Allows quick shutdown. Could be done with ERROR" style="edgeLabel;align=center;verticalAlign=middle;resizable=0;points=[];rounded=1;" vertex="1" connectable="0" parent="Uq7C48yd8U4UPNIid9w1-4">
|
||||
<mxGeometry x="0.0063" relative="1" as="geometry">
|
||||
<mxPoint x="1" y="10" as="offset" />
|
||||
</mxGeometry>
|
||||
</mxCell>
|
||||
<mxCell id="Uq7C48yd8U4UPNIid9w1-7" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=1;orthogonalLoop=1;jettySize=auto;html=1;" edge="1" parent="1" source="Uq7C48yd8U4UPNIid9w1-3" target="Uq7C48yd8U4UPNIid9w1-6">
|
||||
<mxGeometry relative="1" as="geometry">
|
||||
<Array as="points">
|
||||
<mxPoint x="620" y="520" />
|
||||
</Array>
|
||||
</mxGeometry>
|
||||
</mxCell>
|
||||
<mxCell id="Uq7C48yd8U4UPNIid9w1-26" value="RELAY_BAT_SIDE = RELAY_ESC_SIDE
if it is around 90% done" style="edgeLabel;align=left;verticalAlign=middle;resizable=0;points=[];rounded=1;" vertex="1" connectable="0" parent="Uq7C48yd8U4UPNIid9w1-7">
|
||||
<mxGeometry x="-0.128" y="1" relative="1" as="geometry">
|
||||
<mxPoint x="-131" y="21" as="offset" />
|
||||
</mxGeometry>
|
||||
</mxCell>
|
||||
<mxCell id="Uq7C48yd8U4UPNIid9w1-3" value="PRECHARGE" style="rounded=1;whiteSpace=wrap;html=1;" vertex="1" parent="1">
|
||||
<mxGeometry x="560" y="350.00000000000006" width="120" height="60" as="geometry" />
|
||||
</mxCell>
|
||||
<mxCell id="Uq7C48yd8U4UPNIid9w1-17" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=1;orthogonalLoop=1;jettySize=auto;html=1;" edge="1" parent="1" source="Uq7C48yd8U4UPNIid9w1-5" target="Uq7C48yd8U4UPNIid9w1-3">
|
||||
<mxGeometry relative="1" as="geometry">
|
||||
<Array as="points">
|
||||
<mxPoint x="420" y="380.00000000000006" />
|
||||
<mxPoint x="420" y="380.00000000000006" />
|
||||
</Array>
|
||||
</mxGeometry>
|
||||
</mxCell>
|
||||
<mxCell id="Uq7C48yd8U4UPNIid9w1-34" value="Allows quick reactivation instead of shutdown" style="edgeLabel;align=center;verticalAlign=middle;resizable=0;points=[];rounded=1;" vertex="1" connectable="0" parent="Uq7C48yd8U4UPNIid9w1-17">
|
||||
<mxGeometry x="-0.0651" relative="1" as="geometry">
|
||||
<mxPoint x="9" y="-10" as="offset" />
|
||||
</mxGeometry>
|
||||
</mxCell>
|
||||
<mxCell id="Uq7C48yd8U4UPNIid9w1-31" style="edgeStyle=orthogonalEdgeStyle;rounded=1;orthogonalLoop=1;jettySize=auto;html=1;entryX=0;entryY=0.5;entryDx=0;entryDy=0;" edge="1" parent="1" target="Uq7C48yd8U4UPNIid9w1-1">
|
||||
<mxGeometry relative="1" as="geometry">
|
||||
<mxPoint x="280" y="360.00000000000006" as="sourcePoint" />
|
||||
<Array as="points">
|
||||
<mxPoint x="400" y="360.00000000000006" />
|
||||
<mxPoint x="400" y="219.99999999999997" />
|
||||
</Array>
|
||||
</mxGeometry>
|
||||
</mxCell>
|
||||
<mxCell id="Uq7C48yd8U4UPNIid9w1-32" value="RELAY_ESC_SIDE == 0
" style="edgeLabel;align=center;verticalAlign=middle;resizable=0;points=[];rounded=1;" vertex="1" connectable="0" parent="Uq7C48yd8U4UPNIid9w1-31">
|
||||
<mxGeometry x="-0.0317" y="3" relative="1" as="geometry">
|
||||
<mxPoint x="83" y="-37" as="offset" />
|
||||
</mxGeometry>
|
||||
</mxCell>
|
||||
<mxCell id="Uq7C48yd8U4UPNIid9w1-5" value="DISCHARGE" style="rounded=1;whiteSpace=wrap;html=1;" vertex="1" parent="1">
|
||||
<mxGeometry x="160" y="350.00000000000006" width="120" height="60" as="geometry" />
|
||||
</mxCell>
|
||||
<mxCell id="Uq7C48yd8U4UPNIid9w1-8" style="edgeStyle=orthogonalEdgeStyle;rounded=1;orthogonalLoop=1;jettySize=auto;html=1;entryX=0.5;entryY=1;entryDx=0;entryDy=0;" edge="1" parent="1" source="Uq7C48yd8U4UPNIid9w1-6" target="Uq7C48yd8U4UPNIid9w1-5">
|
||||
<mxGeometry relative="1" as="geometry" />
|
||||
</mxCell>
|
||||
<mxCell id="Uq7C48yd8U4UPNIid9w1-10" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=1;orthogonalLoop=1;jettySize=auto;html=1;" edge="1" parent="1" source="Uq7C48yd8U4UPNIid9w1-6" target="Uq7C48yd8U4UPNIid9w1-9">
|
||||
<mxGeometry relative="1" as="geometry">
|
||||
<Array as="points">
|
||||
<mxPoint x="440" y="600" />
|
||||
<mxPoint x="440" y="600" />
|
||||
</Array>
|
||||
</mxGeometry>
|
||||
</mxCell>
|
||||
<mxCell id="Uq7C48yd8U4UPNIid9w1-27" value="CAN Signal = 1100 0000" style="edgeLabel;align=center;verticalAlign=middle;resizable=0;points=[];rounded=1;" vertex="1" connectable="0" parent="Uq7C48yd8U4UPNIid9w1-10">
|
||||
<mxGeometry x="-0.1" y="1" relative="1" as="geometry">
|
||||
<mxPoint x="69" as="offset" />
|
||||
</mxGeometry>
|
||||
</mxCell>
|
||||
<mxCell id="Uq7C48yd8U4UPNIid9w1-6" value="READY" style="whiteSpace=wrap;html=1;rounded=1;" vertex="1" parent="1">
|
||||
<mxGeometry x="360" y="490.00000000000006" width="120" height="60" as="geometry" />
|
||||
</mxCell>
|
||||
<mxCell id="Uq7C48yd8U4UPNIid9w1-11" style="edgeStyle=orthogonalEdgeStyle;rounded=1;orthogonalLoop=1;jettySize=auto;html=1;" edge="1" parent="1" source="Uq7C48yd8U4UPNIid9w1-9" target="Uq7C48yd8U4UPNIid9w1-5">
|
||||
<mxGeometry relative="1" as="geometry">
|
||||
<mxPoint x="340" y="660" as="sourcePoint" />
|
||||
<mxPoint x="160" y="390" as="targetPoint" />
|
||||
<Array as="points">
|
||||
<mxPoint x="140" y="660" />
|
||||
<mxPoint x="140" y="390" />
|
||||
</Array>
|
||||
</mxGeometry>
|
||||
</mxCell>
|
||||
<mxCell id="Uq7C48yd8U4UPNIid9w1-28" value="CAN Signal: 0000 0000 OR
Battery out of charge
" style="edgeLabel;align=center;verticalAlign=middle;resizable=0;points=[];rounded=1;" vertex="1" connectable="0" parent="Uq7C48yd8U4UPNIid9w1-11">
|
||||
<mxGeometry x="-0.6115" relative="1" as="geometry">
|
||||
<mxPoint y="30" as="offset" />
|
||||
</mxGeometry>
|
||||
</mxCell>
|
||||
<mxCell id="Uq7C48yd8U4UPNIid9w1-18" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=1;orthogonalLoop=1;jettySize=auto;html=1;" edge="1" parent="1" source="Uq7C48yd8U4UPNIid9w1-9" target="Uq7C48yd8U4UPNIid9w1-6">
|
||||
<mxGeometry relative="1" as="geometry">
|
||||
<Array as="points">
|
||||
<mxPoint x="400" y="600" />
|
||||
<mxPoint x="400" y="600" />
|
||||
</Array>
|
||||
</mxGeometry>
|
||||
</mxCell>
|
||||
<mxCell id="Uq7C48yd8U4UPNIid9w1-19" value="CAN_Signal: 1000 0000 " style="edgeLabel;html=1;align=center;verticalAlign=middle;resizable=0;points=[];rounded=1;" vertex="1" connectable="0" parent="Uq7C48yd8U4UPNIid9w1-18">
|
||||
<mxGeometry x="0.075" y="-3" relative="1" as="geometry">
|
||||
<mxPoint x="-73" as="offset" />
|
||||
</mxGeometry>
|
||||
</mxCell>
|
||||
<mxCell id="Uq7C48yd8U4UPNIid9w1-9" value="ACTIVE" style="whiteSpace=wrap;html=1;rounded=1;" vertex="1" parent="1">
|
||||
<mxGeometry x="360" y="630" width="120" height="60" as="geometry" />
|
||||
</mxCell>
|
||||
<mxCell id="Uq7C48yd8U4UPNIid9w1-15" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=1;orthogonalLoop=1;jettySize=auto;html=1;" edge="1" parent="1" source="Uq7C48yd8U4UPNIid9w1-12" target="Uq7C48yd8U4UPNIid9w1-14">
|
||||
<mxGeometry relative="1" as="geometry" />
|
||||
</mxCell>
|
||||
<mxCell id="Uq7C48yd8U4UPNIid9w1-23" value="PRECHARGE is done 
" style="edgeLabel;align=center;verticalAlign=middle;resizable=0;points=[];rounded=1;" vertex="1" connectable="0" parent="Uq7C48yd8U4UPNIid9w1-15">
|
||||
<mxGeometry x="0.3217" y="1" relative="1" as="geometry">
|
||||
<mxPoint x="69" y="-22" as="offset" />
|
||||
</mxGeometry>
|
||||
</mxCell>
|
||||
<mxCell id="Uq7C48yd8U4UPNIid9w1-12" value="CHARGING
PRECHAGE" style="rounded=1;whiteSpace=wrap;" vertex="1" parent="1">
|
||||
<mxGeometry x="360" y="70" width="120" height="60" as="geometry" />
|
||||
</mxCell>
|
||||
<mxCell id="Uq7C48yd8U4UPNIid9w1-16" style="edgeStyle=orthogonalEdgeStyle;rounded=1;orthogonalLoop=1;jettySize=auto;html=1;entryX=0.5;entryY=0;entryDx=0;entryDy=0;" edge="1" parent="1" source="Uq7C48yd8U4UPNIid9w1-14" target="Uq7C48yd8U4UPNIid9w1-5">
|
||||
<mxGeometry relative="1" as="geometry">
|
||||
<mxPoint x="40" y="380.00000000000006" as="targetPoint" />
|
||||
</mxGeometry>
|
||||
</mxCell>
|
||||
<mxCell id="Uq7C48yd8U4UPNIid9w1-24" value="CHARGING is done" style="edgeLabel;align=center;verticalAlign=middle;resizable=0;points=[];rounded=1;" vertex="1" connectable="0" parent="Uq7C48yd8U4UPNIid9w1-16">
|
||||
<mxGeometry x="-0.1" y="1" relative="1" as="geometry">
|
||||
<mxPoint x="59" y="5" as="offset" />
|
||||
</mxGeometry>
|
||||
</mxCell>
|
||||
<mxCell id="Uq7C48yd8U4UPNIid9w1-14" value="CHARGING" style="rounded=1;whiteSpace=wrap;html=1;" vertex="1" parent="1">
|
||||
<mxGeometry x="160" y="189.99999999999997" width="120" height="60" as="geometry" />
|
||||
</mxCell>
|
||||
<mxCell id="Uq7C48yd8U4UPNIid9w1-30" value="CAN_Signal: 0000 0000 " style="edgeLabel;align=center;verticalAlign=middle;resizable=0;points=[];rounded=1;" vertex="1" connectable="0" parent="1">
|
||||
<mxGeometry x="280" y="520" as="geometry">
|
||||
<mxPoint x="12" y="11" as="offset" />
|
||||
</mxGeometry>
|
||||
</mxCell>
|
||||
<mxCell id="Uq7C48yd8U4UPNIid9w1-46" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=1;orthogonalLoop=1;jettySize=auto;html=1;exitX=0.503;exitY=-0.006;exitDx=0;exitDy=0;exitPerimeter=0;" edge="1" parent="1" source="Uq7C48yd8U4UPNIid9w1-12" target="Uq7C48yd8U4UPNIid9w1-5">
|
||||
<mxGeometry relative="1" as="geometry">
|
||||
<mxPoint x="420" y="59.99" as="sourcePoint" />
|
||||
<mxPoint x="200" y="350.00000000000006" as="targetPoint" />
|
||||
<Array as="points">
|
||||
<mxPoint x="420" y="40" />
|
||||
<mxPoint x="120" y="40" />
|
||||
<mxPoint x="120" y="370" />
|
||||
</Array>
|
||||
</mxGeometry>
|
||||
</mxCell>
|
||||
<mxCell id="Uq7C48yd8U4UPNIid9w1-48" value="PRECHARGE failure" style="edgeLabel;html=1;align=center;verticalAlign=middle;resizable=0;points=[];" vertex="1" connectable="0" parent="Uq7C48yd8U4UPNIid9w1-46">
|
||||
<mxGeometry x="0.2339" y="-1" relative="1" as="geometry">
|
||||
<mxPoint x="61" y="-91" as="offset" />
|
||||
</mxGeometry>
|
||||
</mxCell>
|
||||
</root>
|
||||
</mxGraphModel>
|
||||
</diagram>
|
||||
</mxfile>
|
||||
4
Documentation/State machine diagram.svg
Normal file
4
Documentation/State machine diagram.svg
Normal file
File diff suppressed because one or more lines are too long
|
After Width: | Height: | Size: 36 KiB |
4
Makefile
4
Makefile
@ -1,5 +1,5 @@
|
||||
##########################################################################################################################
|
||||
# File automatically-generated by tool: [projectgenerator] version: [4.3.0-B58] date: [Thu May 23 18:55:59 CEST 2024]
|
||||
# File automatically-generated by tool: [projectgenerator] version: [4.3.0-B58] date: [Mon Jun 03 16:11:34 EEST 2024]
|
||||
##########################################################################################################################
|
||||
|
||||
# ------------------------------------------------
|
||||
@ -13,7 +13,7 @@
|
||||
######################################
|
||||
# target
|
||||
######################################
|
||||
TARGET = mvbms-test-24
|
||||
TARGET = mvbms
|
||||
|
||||
|
||||
######################################
|
||||
|
||||
@ -10,7 +10,7 @@ target: mvbms-test-24
|
||||
# Can be C or C++
|
||||
language: C
|
||||
|
||||
optimization: Og
|
||||
optimization: O0
|
||||
|
||||
# MCU settings
|
||||
targetMCU: stm32f3x
|
||||
@ -96,6 +96,7 @@ sourceFiles:
|
||||
- Src/**
|
||||
- Core/Src/**
|
||||
- Core/Lib/**
|
||||
- Drivers/STM32F3xx_HAL_Driver/Src/**
|
||||
|
||||
|
||||
# When no makefile is present it will show a warning pop-up.
|
||||
|
||||
268
mvbms.ioc
Normal file
268
mvbms.ioc
Normal file
@ -0,0 +1,268 @@
|
||||
#MicroXplorer Configuration settings - do not modify
|
||||
CAD.formats=
|
||||
CAD.pinconfig=
|
||||
CAD.provider=
|
||||
CAN.ABOM=ENABLE
|
||||
CAN.BS1=CAN_BS1_13TQ
|
||||
CAN.BS2=CAN_BS2_2TQ
|
||||
CAN.CalculateBaudRate=500000
|
||||
CAN.CalculateTimeBit=2000
|
||||
CAN.CalculateTimeQuantum=125.0
|
||||
CAN.IPParameters=CalculateTimeQuantum,CalculateTimeBit,CalculateBaudRate,BS1,BS2,ABOM,Prescaler,NART
|
||||
CAN.NART=ENABLE
|
||||
CAN.Prescaler=2
|
||||
File.Version=6
|
||||
GPIO.groupedBy=Group By Peripherals
|
||||
KeepUserPlacement=true
|
||||
Mcu.CPN=STM32F302CBT6
|
||||
Mcu.Family=STM32F3
|
||||
Mcu.IP0=CAN
|
||||
Mcu.IP1=I2C1
|
||||
Mcu.IP2=NVIC
|
||||
Mcu.IP3=RCC
|
||||
Mcu.IP4=SPI1
|
||||
Mcu.IP5=SYS
|
||||
Mcu.IP6=TIM1
|
||||
Mcu.IP7=TIM15
|
||||
Mcu.IP8=USART1
|
||||
Mcu.IPNb=9
|
||||
Mcu.Name=STM32F302C(B-C)Tx
|
||||
Mcu.Package=LQFP48
|
||||
Mcu.Pin0=PF0-OSC_IN
|
||||
Mcu.Pin1=PF1-OSC_OUT
|
||||
Mcu.Pin10=PB0
|
||||
Mcu.Pin11=PB1
|
||||
Mcu.Pin12=PB2
|
||||
Mcu.Pin13=PB11
|
||||
Mcu.Pin14=PB15
|
||||
Mcu.Pin15=PA8
|
||||
Mcu.Pin16=PA9
|
||||
Mcu.Pin17=PA10
|
||||
Mcu.Pin18=PA11
|
||||
Mcu.Pin19=PA12
|
||||
Mcu.Pin2=PA0
|
||||
Mcu.Pin20=PA13
|
||||
Mcu.Pin21=PA14
|
||||
Mcu.Pin22=PA15
|
||||
Mcu.Pin23=PB3
|
||||
Mcu.Pin24=PB6
|
||||
Mcu.Pin25=PB7
|
||||
Mcu.Pin26=PB9
|
||||
Mcu.Pin27=VP_SYS_VS_Systick
|
||||
Mcu.Pin3=PA1
|
||||
Mcu.Pin4=PA2
|
||||
Mcu.Pin5=PA3
|
||||
Mcu.Pin6=PA4
|
||||
Mcu.Pin7=PA5
|
||||
Mcu.Pin8=PA6
|
||||
Mcu.Pin9=PA7
|
||||
Mcu.PinsNb=28
|
||||
Mcu.ThirdPartyNb=0
|
||||
Mcu.UserConstants=
|
||||
Mcu.UserName=STM32F302CBTx
|
||||
MxCube.Version=6.11.1
|
||||
MxDb.Version=DB.6.0.111
|
||||
NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
|
||||
NVIC.CAN_RX1_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
|
||||
NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
|
||||
NVIC.ForceEnableDMAVector=true
|
||||
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
|
||||
NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
|
||||
NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
|
||||
NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
|
||||
NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
|
||||
NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
|
||||
NVIC.SysTick_IRQn=true\:15\:0\:false\:false\:true\:false\:true\:false
|
||||
NVIC.USB_LP_CAN_RX0_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
|
||||
NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
|
||||
PA0.GPIOParameters=PinState,GPIO_Label
|
||||
PA0.GPIO_Label=RELAY_EN
|
||||
PA0.Locked=true
|
||||
PA0.PinState=GPIO_PIN_RESET
|
||||
PA0.Signal=GPIO_Output
|
||||
PA1.GPIOParameters=PinState,GPIO_Label
|
||||
PA1.GPIO_Label=_60V_EN
|
||||
PA1.Locked=true
|
||||
PA1.PinState=GPIO_PIN_RESET
|
||||
PA1.Signal=GPIO_Output
|
||||
PA10.GPIOParameters=GPIO_Label
|
||||
PA10.GPIO_Label=CURRENT_SENSOR_ON
|
||||
PA10.Locked=true
|
||||
PA10.Signal=GPIO_Input
|
||||
PA11.Locked=true
|
||||
PA11.Mode=CAN_Activate
|
||||
PA11.Signal=CAN_RX
|
||||
PA12.Locked=true
|
||||
PA12.Mode=CAN_Activate
|
||||
PA12.Signal=CAN_TX
|
||||
PA13.Locked=true
|
||||
PA13.Mode=Trace_Asynchronous_SW
|
||||
PA13.Signal=SYS_JTMS-SWDIO
|
||||
PA14.Locked=true
|
||||
PA14.Mode=Trace_Asynchronous_SW
|
||||
PA14.Signal=SYS_JTCK-SWCLK
|
||||
PA15.Locked=true
|
||||
PA15.Mode=I2C
|
||||
PA15.Signal=I2C1_SCL
|
||||
PA2.GPIOParameters=GPIO_Label
|
||||
PA2.GPIO_Label=PWM_PG_FAN1
|
||||
PA2.Locked=true
|
||||
PA2.Signal=S_TIM15_CH1
|
||||
PA3.GPIOParameters=GPIO_Label
|
||||
PA3.GPIO_Label=PWM_PG_FAN2
|
||||
PA3.Locked=true
|
||||
PA3.Signal=S_TIM15_CH2
|
||||
PA4.GPIOParameters=GPIO_Label
|
||||
PA4.GPIO_Label=CSB
|
||||
PA4.Locked=true
|
||||
PA4.Signal=GPIO_Output
|
||||
PA5.Locked=true
|
||||
PA5.Mode=Full_Duplex_Master
|
||||
PA5.Signal=SPI1_SCK
|
||||
PA6.Locked=true
|
||||
PA6.Mode=Full_Duplex_Master
|
||||
PA6.Signal=SPI1_MISO
|
||||
PA7.Locked=true
|
||||
PA7.Mode=Full_Duplex_Master
|
||||
PA7.Signal=SPI1_MOSI
|
||||
PA8.GPIOParameters=GPIO_Label
|
||||
PA8.GPIO_Label=RELAY_BATT_SIDE_ON
|
||||
PA8.Locked=true
|
||||
PA8.Signal=GPIO_Input
|
||||
PA9.GPIOParameters=GPIO_Label
|
||||
PA9.GPIO_Label=RELAY_ESC_SIDE_ON
|
||||
PA9.Locked=true
|
||||
PA9.Signal=GPIO_Input
|
||||
PB0.GPIOParameters=PinState,GPIO_Label
|
||||
PB0.GPIO_Label=STATUS_LED_R
|
||||
PB0.Locked=true
|
||||
PB0.PinState=GPIO_PIN_SET
|
||||
PB0.Signal=GPIO_Output
|
||||
PB1.GPIOParameters=PinState,GPIO_Label
|
||||
PB1.GPIO_Label=STATUS_LED_B
|
||||
PB1.Locked=true
|
||||
PB1.PinState=GPIO_PIN_SET
|
||||
PB1.Signal=GPIO_Output
|
||||
PB11.GPIOParameters=PinState,GPIO_Label
|
||||
PB11.GPIO_Label=PRECHARGE_EN
|
||||
PB11.Locked=true
|
||||
PB11.PinState=GPIO_PIN_RESET
|
||||
PB11.Signal=GPIO_Output
|
||||
PB15.GPIOParameters=GPIO_Label
|
||||
PB15.GPIO_Label=PWM_Battery_Cooling
|
||||
PB15.Locked=true
|
||||
PB15.Mode=PWM Generation3 CH3N
|
||||
PB15.Signal=TIM1_CH3N
|
||||
PB2.GPIOParameters=PinState,GPIO_Label
|
||||
PB2.GPIO_Label=STATUS_LED_G
|
||||
PB2.Locked=true
|
||||
PB2.PinState=GPIO_PIN_SET
|
||||
PB2.Signal=GPIO_Output
|
||||
PB3.Locked=true
|
||||
PB3.Mode=Trace_Asynchronous_SW
|
||||
PB3.Signal=SYS_JTDO-TRACESWO
|
||||
PB6.Locked=true
|
||||
PB6.Mode=Asynchronous
|
||||
PB6.Signal=USART1_TX
|
||||
PB7.Locked=true
|
||||
PB7.Mode=Asynchronous
|
||||
PB7.Signal=USART1_RX
|
||||
PB9.Locked=true
|
||||
PB9.Mode=I2C
|
||||
PB9.Signal=I2C1_SDA
|
||||
PF0-OSC_IN.Locked=true
|
||||
PF0-OSC_IN.Mode=HSE-External-Oscillator
|
||||
PF0-OSC_IN.Signal=RCC_OSC_IN
|
||||
PF1-OSC_OUT.Locked=true
|
||||
PF1-OSC_OUT.Mode=HSE-External-Oscillator
|
||||
PF1-OSC_OUT.Signal=RCC_OSC_OUT
|
||||
PinOutPanel.RotationAngle=0
|
||||
ProjectManager.AskForMigrate=true
|
||||
ProjectManager.BackupPrevious=false
|
||||
ProjectManager.CompilerOptimize=6
|
||||
ProjectManager.ComputerToolchain=false
|
||||
ProjectManager.CoupleFile=false
|
||||
ProjectManager.CustomerFirmwarePackage=
|
||||
ProjectManager.DefaultFWLocation=true
|
||||
ProjectManager.DeletePrevious=true
|
||||
ProjectManager.DeviceId=STM32F302CBTx
|
||||
ProjectManager.FirmwarePackage=STM32Cube FW_F3 V1.11.4
|
||||
ProjectManager.FreePins=true
|
||||
ProjectManager.HalAssertFull=false
|
||||
ProjectManager.HeapSize=0x200
|
||||
ProjectManager.KeepUserCode=true
|
||||
ProjectManager.LastFirmware=false
|
||||
ProjectManager.LibraryCopy=1
|
||||
ProjectManager.MainLocation=Core/Src
|
||||
ProjectManager.NoMain=false
|
||||
ProjectManager.PreviousToolchain=
|
||||
ProjectManager.ProjectBuild=false
|
||||
ProjectManager.ProjectFileName=mvbms.ioc
|
||||
ProjectManager.ProjectName=mvbms
|
||||
ProjectManager.ProjectStructure=
|
||||
ProjectManager.RegisterCallBack=
|
||||
ProjectManager.StackSize=0x400
|
||||
ProjectManager.TargetToolchain=Makefile
|
||||
ProjectManager.ToolChainLocation=
|
||||
ProjectManager.UAScriptAfterPath=
|
||||
ProjectManager.UAScriptBeforePath=
|
||||
ProjectManager.UnderRoot=false
|
||||
ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_CAN_Init-CAN-false-HAL-true,4-MX_I2C1_Init-I2C1-false-HAL-true,5-MX_SPI1_Init-SPI1-false-HAL-true,6-MX_TIM15_Init-TIM15-false-HAL-true,7-MX_USART1_UART_Init-USART1-false-HAL-true,8-MX_TIM1_Init-TIM1-false-HAL-true
|
||||
RCC.ADC12outputFreq_Value=16000000
|
||||
RCC.AHBFreq_Value=16000000
|
||||
RCC.APB1Freq_Value=16000000
|
||||
RCC.APB1TimFreq_Value=16000000
|
||||
RCC.APB2Freq_Value=16000000
|
||||
RCC.APB2TimFreq_Value=16000000
|
||||
RCC.CortexFreq_Value=16000000
|
||||
RCC.FCLKCortexFreq_Value=16000000
|
||||
RCC.FamilyName=M
|
||||
RCC.HCLKFreq_Value=16000000
|
||||
RCC.HSEPLLFreq_Value=16000000
|
||||
RCC.HSE_VALUE=16000000
|
||||
RCC.HSIPLLFreq_Value=4000000
|
||||
RCC.HSI_VALUE=8000000
|
||||
RCC.I2C1Freq_Value=8000000
|
||||
RCC.I2C2Freq_Value=8000000
|
||||
RCC.IPParameters=ADC12outputFreq_Value,AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,CortexFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSEPLLFreq_Value,HSE_VALUE,HSIPLLFreq_Value,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,LSE_VALUE,LSI_VALUE,MCOFreq_Value,PLLCLKFreq_Value,PLLMCOFreq_Value,PLLMUL,RTCFreq_Value,RTCHSEDivFreq_Value,SYSCLKFreq_VALUE,SYSCLKSourceVirtual,TIM1Freq_Value,TIM2Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USBFreq_Value,VCOOutput2Freq_Value
|
||||
RCC.LSE_VALUE=32768
|
||||
RCC.LSI_VALUE=40000
|
||||
RCC.MCOFreq_Value=16000000
|
||||
RCC.PLLCLKFreq_Value=16000000
|
||||
RCC.PLLMCOFreq_Value=8000000
|
||||
RCC.PLLMUL=RCC_PLL_MUL4
|
||||
RCC.RTCFreq_Value=40000
|
||||
RCC.RTCHSEDivFreq_Value=500000
|
||||
RCC.SYSCLKFreq_VALUE=16000000
|
||||
RCC.SYSCLKSourceVirtual=RCC_SYSCLKSOURCE_HSE
|
||||
RCC.TIM1Freq_Value=16000000
|
||||
RCC.TIM2Freq_Value=16000000
|
||||
RCC.USART1Freq_Value=16000000
|
||||
RCC.USART2Freq_Value=16000000
|
||||
RCC.USART3Freq_Value=16000000
|
||||
RCC.USBFreq_Value=16000000
|
||||
RCC.VCOOutput2Freq_Value=4000000
|
||||
SH.S_TIM15_CH1.0=TIM15_CH1,PWM Generation1 CH1
|
||||
SH.S_TIM15_CH1.ConfNb=1
|
||||
SH.S_TIM15_CH2.0=TIM15_CH2,PWM Generation2 CH2
|
||||
SH.S_TIM15_CH2.ConfNb=1
|
||||
SPI1.BaudRatePrescaler=SPI_BAUDRATEPRESCALER_32
|
||||
SPI1.CalculateBaudRate=500.0 KBits/s
|
||||
SPI1.DataSize=SPI_DATASIZE_8BIT
|
||||
SPI1.Direction=SPI_DIRECTION_2LINES
|
||||
SPI1.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate,DataSize,BaudRatePrescaler
|
||||
SPI1.Mode=SPI_MODE_MASTER
|
||||
SPI1.VirtualType=VM_MASTER
|
||||
TIM1.Channel-PWM\ Generation3\ CH3N=TIM_CHANNEL_3
|
||||
TIM1.IPParameters=Channel-PWM Generation3 CH3N
|
||||
TIM15.Channel-PWM\ Generation1\ CH1=TIM_CHANNEL_1
|
||||
TIM15.Channel-PWM\ Generation2\ CH2=TIM_CHANNEL_2
|
||||
TIM15.IPParameters=Channel-PWM Generation1 CH1,Channel-PWM Generation2 CH2,Prescaler,Period,Pulse-PWM Generation1 CH1
|
||||
TIM15.Period=39999
|
||||
TIM15.Prescaler=7
|
||||
TIM15.Pulse-PWM\ Generation1\ CH1=0
|
||||
USART1.IPParameters=VirtualMode-Asynchronous
|
||||
USART1.VirtualMode-Asynchronous=VM_ASYNC
|
||||
VP_SYS_VS_Systick.Mode=SysTick
|
||||
VP_SYS_VS_Systick.Signal=SYS_VS_Systick
|
||||
board=custom
|
||||
Reference in New Issue
Block a user