Implement fan PWM

Core/Inc/FanControl.h

@@ -0,0 +1,15 @@
+#ifndef INC_FAN_CONTROL_H
+#define INC_FAN_CONTROL_H
+
+#include "stm32f4xx_hal.h"
+#include "stm32f4xx_hal_def.h"
+#include "stm32f4xx_hal_tim.h"
+
+HAL_StatusTypeDef fan_ctrl_init(TIM_HandleTypeDef* handle, uint32_t channel);
+
+/**
+ * @brief Set the power of the fan (0 -> off, 100 -> full power).
+ */
+void fan_ctrl_set_power(uint32_t percent);
+
+#endif // INC_FAN_CONTROL_H

Core/Inc/main.h

@@ -48,6 +48,8 @@ extern "C" {
 #define MAIN_LOOP_PERIOD 100 /* ms */
 /* USER CODE END EM */
 
+void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim);
+
 /* Exported functions prototypes ---------------------------------------------*/
 void Error_Handler(void);
 

Core/Inc/stm32f4xx_hal_conf.h

@@ -63,7 +63,7 @@
 /* #define HAL_SD_MODULE_ENABLED   */
 /* #define HAL_MMC_MODULE_ENABLED   */
 /* #define HAL_SPI_MODULE_ENABLED   */
-/* #define HAL_TIM_MODULE_ENABLED   */
+#define HAL_TIM_MODULE_ENABLED
 #define HAL_UART_MODULE_ENABLED
 /* #define HAL_USART_MODULE_ENABLED   */
 /* #define HAL_IRDA_MODULE_ENABLED   */

Core/Src/FanControl.c

@@ -0,0 +1,27 @@
+#include "FanControl.h"
+
+#include "stm32f4xx_hal_def.h"
+#include "stm32f4xx_hal_tim.h"
+
+TIM_HandleTypeDef* timer;
+uint32_t channel;
+
+HAL_StatusTypeDef fan_ctrl_init(TIM_HandleTypeDef* handle, uint32_t channel_) {
+  timer = handle;
+  channel = channel_;
+
+  return HAL_TIM_PWM_Start(timer, channel);
+}
+
+void fan_ctrl_set_power(uint32_t percent) {
+  if (percent > 100) {
+    percent = 100;
+  }
+
+  // The PWM signal switches a low side switch, so we need to invert the duty
+  // cycle.
+  percent = 100 - percent;
+
+  uint32_t counter = timer->Init.Period * percent / 100;
+  __HAL_TIM_SET_COMPARE(timer, channel, counter);
+}

Core/Src/main.c

@@ -23,9 +23,11 @@
 /* USER CODE BEGIN Includes */
 #include "BQ_Abstraction_Layer.h"
 #include "EEPROM.h"
+#include "FanControl.h"
 
 #include "stm32f4xx_hal.h"
 #include "stm32f4xx_hal_gpio.h"
+#include "stm32f4xx_hal_tim.h"
 /* USER CODE END Includes */
 
 /* Private typedef -----------------------------------------------------------*/
@@ -48,6 +50,8 @@ CAN_HandleTypeDef hcan2;
 
 I2C_HandleTypeDef hi2c1;
 
+TIM_HandleTypeDef htim3;
+
 UART_HandleTypeDef huart1;
 UART_HandleTypeDef huart2;
 UART_HandleTypeDef huart3;
@@ -67,6 +71,7 @@ static void MX_USART1_UART_Init(void);
 static void MX_USART2_UART_Init(void);
 static void MX_USART3_UART_Init(void);
 static void MX_USART6_UART_Init(void);
+static void MX_TIM3_Init(void);
 /* USER CODE BEGIN PFP */
 
 /* USER CODE END PFP */
@@ -136,6 +141,7 @@ int main(void) {
   MX_USART2_UART_Init();
   MX_USART3_UART_Init();
   MX_USART6_UART_Init();
+  MX_TIM3_Init();
   /* USER CODE BEGIN 2 */
   HAL_GPIO_WritePin(DCDC_CTRL_GPIO_Port, DCDC_CTRL_Pin, GPIO_PIN_SET);
   HAL_Delay(100);
@@ -145,6 +151,7 @@ int main(void) {
   if (eeprom_read_random(EEPROM_ADDR_SLAVE_ID, &id) == HAL_OK) {
     HAL_GPIO_WritePin(STAT_LED4_GPIO_Port, STAT_LED4_Pin, GPIO_PIN_SET);
   }
+  fan_ctrl_init(&htim3, TIM_CHANNEL_4);
   /* USER CODE END 2 */
 
   /* Infinite loop */
@@ -156,6 +163,7 @@ int main(void) {
     update_status_leds();
     afe_measure();
     delay_period();
+    fan_ctrl_set_power((HAL_GetTick() / 100) % 100);
   }
   /* USER CODE END 3 */
 }
@@ -297,6 +305,50 @@ static void MX_I2C1_Init(void) {
   /* USER CODE END I2C1_Init 2 */
 }
 
+/**
+ * @brief TIM3 Initialization Function
+ * @param None
+ * @retval None
+ */
+static void MX_TIM3_Init(void) {
+
+  /* USER CODE BEGIN TIM3_Init 0 */
+
+  /* USER CODE END TIM3_Init 0 */
+
+  TIM_MasterConfigTypeDef sMasterConfig = {0};
+  TIM_OC_InitTypeDef sConfigOC = {0};
+
+  /* USER CODE BEGIN TIM3_Init 1 */
+
+  /* USER CODE END TIM3_Init 1 */
+  htim3.Instance = TIM3;
+  htim3.Init.Prescaler = 0;
+  htim3.Init.CounterMode = TIM_COUNTERMODE_UP;
+  htim3.Init.Period = 500;
+  htim3.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
+  htim3.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+  if (HAL_TIM_PWM_Init(&htim3) != HAL_OK) {
+    Error_Handler();
+  }
+  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
+  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
+  if (HAL_TIMEx_MasterConfigSynchronization(&htim3, &sMasterConfig) != HAL_OK) {
+    Error_Handler();
+  }
+  sConfigOC.OCMode = TIM_OCMODE_PWM1;
+  sConfigOC.Pulse = 0;
+  sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
+  sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
+  if (HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_4) != HAL_OK) {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN TIM3_Init 2 */
+
+  /* USER CODE END TIM3_Init 2 */
+  HAL_TIM_MspPostInit(&htim3);
+}
+
 /**
  * @brief USART1 Initialization Function
  * @param None
@@ -459,14 +511,6 @@ static void MX_GPIO_Init(void) {
   GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
   HAL_GPIO_Init(BQ_FAULT_N_GPIO_Port, &GPIO_InitStruct);
-
-  /*Configure GPIO pin : FAN_PWM_Pin */
-  GPIO_InitStruct.Pin = FAN_PWM_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
-  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
-  GPIO_InitStruct.Alternate = GPIO_AF2_TIM3;
-  HAL_GPIO_Init(FAN_PWM_GPIO_Port, &GPIO_InitStruct);
 }
 
 /* USER CODE BEGIN 4 */

Core/Src/stm32f4xx_hal_msp.c

@@ -57,7 +57,9 @@
 /* USER CODE BEGIN 0 */
 
 /* USER CODE END 0 */
-/**
+
+void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
+                    /**
   * Initializes the Global MSP.
   */
 void HAL_MspInit(void)
@@ -289,6 +291,76 @@ void HAL_I2C_MspDeInit(I2C_HandleTypeDef* hi2c)
 
 }
 
+/**
+* @brief TIM_PWM MSP Initialization
+* This function configures the hardware resources used in this example
+* @param htim_pwm: TIM_PWM handle pointer
+* @retval None
+*/
+void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef* htim_pwm)
+{
+  if(htim_pwm->Instance==TIM3)
+  {
+  /* USER CODE BEGIN TIM3_MspInit 0 */
+
+  /* USER CODE END TIM3_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_TIM3_CLK_ENABLE();
+  /* USER CODE BEGIN TIM3_MspInit 1 */
+
+  /* USER CODE END TIM3_MspInit 1 */
+  }
+
+}
+
+void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
+{
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  if(htim->Instance==TIM3)
+  {
+  /* USER CODE BEGIN TIM3_MspPostInit 0 */
+
+  /* USER CODE END TIM3_MspPostInit 0 */
+
+    __HAL_RCC_GPIOC_CLK_ENABLE();
+    /**TIM3 GPIO Configuration
+    PC9     ------> TIM3_CH4
+    */
+    GPIO_InitStruct.Pin = FAN_PWM_Pin;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+    GPIO_InitStruct.Alternate = GPIO_AF2_TIM3;
+    HAL_GPIO_Init(FAN_PWM_GPIO_Port, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN TIM3_MspPostInit 1 */
+
+  /* USER CODE END TIM3_MspPostInit 1 */
+  }
+
+}
+/**
+* @brief TIM_PWM MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param htim_pwm: TIM_PWM handle pointer
+* @retval None
+*/
+void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef* htim_pwm)
+{
+  if(htim_pwm->Instance==TIM3)
+  {
+  /* USER CODE BEGIN TIM3_MspDeInit 0 */
+
+  /* USER CODE END TIM3_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_TIM3_CLK_DISABLE();
+  /* USER CODE BEGIN TIM3_MspDeInit 1 */
+
+  /* USER CODE END TIM3_MspDeInit 1 */
+  }
+
+}
+
 /**
 * @brief UART MSP Initialization
 * This function configures the hardware resources used in this example

Makefile

@@ -1,5 +1,5 @@
 ##########################################################################################################################
-# File automatically-generated by tool: [projectgenerator] version: [3.16.0] date: [Sun Jun 12 16:56:47 CEST 2022] 
+# File automatically-generated by tool: [projectgenerator] version: [3.16.0] date: [Mon Jun 13 23:59:18 CEST 2022] 
 ##########################################################################################################################
 
 # ------------------------------------------------

STM32Make.make

@@ -41,6 +41,7 @@ Core/Src/BQ_Abstraction_Layer.c \
 Core/Src/BQ_Communication.c \
 Core/Src/BatteryManagement.c \
 Core/Src/EEPROM.c \
+Core/Src/FanControl.c \
 Core/Src/SoftI2C.c \
 Core/Src/TMP144.c \
 Core/Src/main.c \

ams-slave.ioc

@@ -21,15 +21,16 @@ Mcu.CPN=STM32F412RET6
 Mcu.Family=STM32F4
 Mcu.IP0=CAN1
 Mcu.IP1=CAN2
+Mcu.IP10=USART6
 Mcu.IP2=I2C1
 Mcu.IP3=NVIC
 Mcu.IP4=RCC
 Mcu.IP5=SYS
-Mcu.IP6=USART1
+Mcu.IP6=TIM3
-Mcu.IP7=USART2
+Mcu.IP7=USART1
-Mcu.IP8=USART3
+Mcu.IP8=USART2
-Mcu.IP9=USART6
+Mcu.IP9=USART3
-Mcu.IPNb=10
+Mcu.IPNb=11
 Mcu.Name=STM32F412R(E-G)Tx
 Mcu.Package=LQFP64
 Mcu.Pin0=PC0
@@ -205,8 +206,12 @@ RCC.VCOI2SInputFreq_Value=1000000
 RCC.VCOI2SOutputFreq_Value=192000000
 RCC.VCOInputFreq_Value=2000000
 RCC.VCOOutputFreq_Value=100000000
-SH.S_TIM3_CH4.0=TIM3_CH4
+SH.S_TIM3_CH4.0=TIM3_CH4,PWM Generation4 CH4
 SH.S_TIM3_CH4.ConfNb=1
+TIM3.Channel-PWM\ Generation4\ CH4=TIM_CHANNEL_4
+TIM3.IPParameters=Channel-PWM Generation4 CH4,Period,Pulse-PWM Generation4 CH4
+TIM3.Period=500
+TIM3.Pulse-PWM\ Generation4\ CH4=0
 USART1.BaudRate=115200
 USART1.IPParameters=VirtualMode,BaudRate
 USART1.VirtualMode=VM_ASYNC