diff --git a/Core/Inc/BQ_Communication.h b/Core/Inc/BQ_Communication.h
index 4a1c943..9c1452e 100644
--- a/Core/Inc/BQ_Communication.h
+++ b/Core/Inc/BQ_Communication.h
@@ -16,13 +16,50 @@
 
 typedef enum { BQ_COMM_OK, BQ_COMM_ERR_HAL, BQ_COMM_ERR_CRC } BQ_Comm_Status;
 
+/**
+ * @brief Defines UART and DMA Handle
+ *
+ * Always call the init routine before using any other function of the libary.
+ */
 void init_BQCom(UART_HandleTypeDef* uarthandle);
 
+/**
+ * @brief Calculate CRC according to BQ spec.
+ *
+ * @param message_buffer Message buffer, including two bytes for the CRC. The
+ * CRC will be written to the last two bytes.
+ * @param bufferlength The length of message_buffer, including the two bytes for
+ * the CRC.
+ *
+ * @return 0 if the buffer is to small
+ * @return 1 if the function was successful
+ */
 uint16_t Calculate_CRC(uint8_t* message_buffer, uint16_t bufferlength);
+/**
+ * @brief Checks if the CRC is correct
+ *
+ * @return 0 if the Buffer is too small or the CRC is incorrect
+ * @return 1 if the CRC is correct
+ */
 uint16_t Check_CRC(uint8_t* message_buffer, uint16_t bufferlength);
 
+/**
+ * @brief Writes data to a register of the BQ76.
+ *
+ * @param registeraddress specifies the register. Address definitions are
+ * available in BQ_Register_Definitions.h
+ * @param registersize defines the register size in bytes.
+ * @param data defines the data written to the BQ
+ */
 uint32_t BQ_Write_Register(uint8_t registeraddress, uint8_t registersize,
                            uint32_t data);
+/**
+ * @brief Read the data of a register specified by its address
+ *
+ * @param registeraddress specifies the register. Address definitions are
+ * available in BQ_Register_Definitions.h
+ * @param registersize defines the register size in bytes.
+ */
 uint8_t BQ_Read_Register(uint8_t registeraddress, uint8_t registersize,
                          uint32_t* data);
 /**
@@ -32,9 +69,14 @@ uint8_t BQ_Read_Register(uint8_t registeraddress, uint8_t registersize,
  * Buffer size should be 2xMeasured Voltages
  */
 BQ_Comm_Status BQ_ReadMeasurements(uint8_t* buffer, uint8_t bufferlength);
-uint8_t Communication_Reset();
 
+/**
+ * @brief Hardware layer implementation of the UART transmit
+ */
 uint8_t BQ_UART_Transmit(uint8_t* message_buffer, uint16_t bufferlength);
+/**
+ * @brief Hardware layer implementation of the UART receive
+ */
 uint8_t BQ_UART_Receive(uint8_t* message_buffer, uint16_t bufferlength);
 
 #endif
diff --git a/Core/Src/BQ_Communication.c b/Core/Src/BQ_Communication.c
index 501ac7f..0cf2892 100644
--- a/Core/Src/BQ_Communication.c
+++ b/Core/Src/BQ_Communication.c
@@ -39,21 +39,8 @@ const uint16_t crc16_table[256] = {
     0x4540, 0x8701, 0x47C0, 0x4680, 0x8641, 0x8201, 0x42C0, 0x4380, 0x8341,
     0x4100, 0x81C1, 0x8081, 0x4040};
 
-/*	Defines UART and DMA Handle
- *  Always use the Init Routine before using any other function of the Libary
- *
- *
- */
 void init_BQCom(UART_HandleTypeDef* uarthandle) { bq_uart = uarthandle; }
 
-/* Input Message Buffer with the Last two Bytes set to 0. The Last Bytes will be
- * the CRC after use of the Function
- *
- * Returns 0 if the buffer is to small
- *
- * Returns 1 if the Function was successfull
- *
- */
 uint16_t Calculate_CRC(uint8_t* message_buffer, uint16_t bufferlength) {
   uint16_t wCRC = 0;
 
@@ -74,13 +61,6 @@ uint16_t Calculate_CRC(uint8_t* message_buffer, uint16_t bufferlength) {
   return 1;
 }
 
-/*Checks if the CRC is correct
- *
- * Returns 0 if the Buffer is too small or the CRC is incorrect
- *
- * Returns 1 if the CRC is correct
- */
-
 uint16_t Check_CRC(uint8_t* message_buffer, uint16_t bufferlength) {
   uint16_t wCRC = 0;
 
@@ -106,17 +86,6 @@ uint16_t Check_CRC(uint8_t* message_buffer, uint16_t bufferlength) {
   }
 }
 
-/* Writes data to a register of the BQ76
- *
- * registeraddress specifies the register
- * Makros are available in BQ_Register_Definitions.h
- *
- * registersize defines the register size in bytes
- *
- * data defines the data written to the BQ
- *
- */
-
 uint32_t BQ_Write_Register(uint8_t registeraddress, uint8_t registersize,
                            uint32_t data) {
   uint8_t message[registersize + 5];
@@ -136,13 +105,6 @@ uint32_t BQ_Write_Register(uint8_t registeraddress, uint8_t registersize,
   return 1;
 }
 
-/*Read the Data of a Register specified by its Address
- *
- * Makros for register names are available in BQ_Register_Definitions.h
- *
- * registersize defines the register size in bytes
- */
-
 uint8_t BQ_Read_Register(uint8_t registeraddress, uint8_t registersize,
                          uint32_t* data) {
   uint8_t message[6] = {0};
@@ -210,26 +172,14 @@ BQ_Comm_Status BQ_ReadMeasurements(uint8_t* buffer, uint8_t bufferlength) {
   return BQ_COMM_OK;
 }
 
-/* Hardware Layer Implementation of the UART Transmit
- *
- */
 uint8_t BQ_UART_Transmit(uint8_t* message_buffer, uint16_t bufferlength) {
   HAL_StatusTypeDef uartstate =
       HAL_UART_Transmit(bq_uart, message_buffer, bufferlength, BQUARTTIMEOUT);
   return (uint8_t)uartstate;
 }
 
-/* Hardware Layer Implementation of the UART Receive
- *
- */
 uint8_t BQ_UART_Receive(uint8_t* message_buffer, uint16_t bufferlength) {
   HAL_StatusTypeDef uartstate =
       HAL_UART_Receive(bq_uart, message_buffer, bufferlength, BQUARTTIMEOUT);
   return (uint8_t)uartstate;
 }
-
-/*Resets the Communication Interface of the BQ76
- *
- *
- */
-uint8_t Communication_Reset() { return 0; }