ams-slave-22/Core/Src/BQ_Abstraction_Layer.c

/*
 * BQ_Abstraction_Layer.c
 *
 *  Created on: 29.01.2022
 *      Author: max
 */

#include "BQ_Abstraction_Layer.h"

#include "BQ_Communication.h"
#include "BQ_Register_Definitions.h"

#include "stm32f4xx_hal.h"

uint16_t cell_voltages[N_CELLS];

uint8_t bq_status;
uint32_t lastmeasurementtime;

void afe_init(UART_HandleTypeDef* uarthandle) {
  // Initialise underlying BQ Communication Functions
  init_BQCom(uarthandle);

  // Turn the AFE on off on to cycle a full reset
  afe_wakeup();
  HAL_Delay(10);
  afe_shutdown();
  HAL_Delay(100);
  afe_wakeup();
  HAL_Delay(10);

  bq_status = BQ_INIT_PHASE;

  afe_config_communication();
  afe_config_measurement_channels();

  afe_config_gpios();
  afe_activate_LED();

  afe_init_fault_thresholds();

  HAL_Delay(1000);

  afe_update_Checksum();

  afe_clear_all_faults();

  HAL_Delay(10);

  afe_check_faults();
}

void afe_shutdown() { BQ_Write_Register(DEV_CNTRL, DEV_CNTRL_SIZE, 0x40); }

void afe_wakeup() {
  HAL_GPIO_WritePin(WAKEUP_PORT, WAKEUP_PIN, GPIO_PIN_SET);
  HAL_Delay(1);
  HAL_GPIO_WritePin(WAKEUP_PORT, WAKEUP_PIN, GPIO_PIN_RESET);
}

void afe_measure() {
  uint8_t cellvoltagebuffer[2 * N_CELLS];
  uint8_t retval = BQ_ReadMeasurements(cellvoltagebuffer, 2 * N_CELLS);

  lastmeasurementtime = HAL_GetTick();

  if (retval == 0) {
    bq_status = BQ_ERROR;
  } else {

    for (int n = 0; n < N_CELLS; n++) {
      cell_voltages[N_CELLS - 1 - n] =
          (uint16_t)(cellvoltagebuffer[2 * n] << 8) +
          (uint16_t)cellvoltagebuffer[2 * n + 1];
    }
  }
}

void afe_selftest() {}

void afe_check_faults() {
  uint32_t faultflags = 0;
  BQ_Read_Register(FAULT_SUM, FAULT_SUM_SIZE, &faultflags);

  if (faultflags != 0) {
    bq_status = BQ_ERROR;
  }
}

void afe_clear_all_faults() {
  BQ_Write_Register(FAULT_SUM, FAULT_SUM_SIZE, 0xFFC0); // Clear all Faults
  bq_status = BQ_STDBY;
  HAL_Delay(1);
  afe_check_faults();
  if (bq_status == BQ_STDBY) {
    bq_status = BQ_RDY;
  }
}

void afe_init_fault_thresholds() {

  BQ_Write_Register(FO_CTRL, FO_CTRL_SIZE,
                    0xC3C0); // Include UV Fault OV Fault COMM SYS CHIP GPI
                             // Faults to Fault Output

  BQ_Write_Register(CELL_UV, CELL_UV_SIZE, (CELL_UV_THRESHOLD & 0x03));
  BQ_Write_Register(CELL_OV, CELL_OV_SIZE, (CELL_OV_THRESHOLD & 0x03));
}

void afe_update_Checksum() {
  uint32_t checksum = 0;
  BQ_Read_Register(CSUM_RSLT, CSUM_RSLT_SIZE, &checksum);
  BQ_Write_Register(CSUM, CSUM_SIZE, checksum);
}

void afe_config_measurement_channels() {
  uint16_t cellmask = 0b1111111111;
  uint32_t channelmask = cellmask << 16;
  BQ_Write_Register(NCHAN, NCHAN_SIZE, N_CELLS);
  uint32_t channels = 0b1111111111 << 16;
  BQ_Write_Register(CHANNELS, CHANNELS_SIZE, channels);
  BQ_Write_Register(OVERSMPL, OVERSMPL_SIZE,
                    0xFA); // Oversampling enabled with 4 samples as average
}

void afe_config_communication() {
  BQ_Write_Register(
      COMCONFIG, COMCONFIG_SIZE,
      (1 << 12) |
          (1 << 7)); // Enables UART Transceiver Diables Differential UART
}

void afe_config_gpios() { BQ_Write_Register(GPIO_DIR, GPIO_DIR_SIZE, 0x01); }

void afe_activate_LED() { BQ_Write_Register(GPIO_OUT, GPIO_OUT_SIZE, 0x01); }

void afe_config_balancing() {
  BQ_Write_Register(CBCONFIG, CBCONFIG_SIZE, 0x10);
}

void afe_balance_channels(uint16_t channelstobalance) {
  BQ_Write_Register(CBENBL, CBENBL_SIZE, channelstobalance);
}