add -Wextra compiler flag

(but turn off warnings for unused parameters)

Core/Inc/can.h

@@ -12,7 +12,6 @@
 #define CAN_ID_AMS_IN 0x00B
 #define CAN_ID_AMS_ERROR 0x00C
 #define CAN_ID_SLAVE_STATUS_BASE 0x080
-#define CAN_ID_SLAVE_STATUS_FUCKED 0x0A0
 #define CAN_ID_SLAVE_LOG 0x4F4
 #define CAN_ID_SHUNT_BASE 0x520
 #define CAN_ID_SHUNT_CURRENT 0x521

Core/Inc/shunt_monitoring.h

@@ -7,7 +7,6 @@
 
 #define SHUNT_TIMEOUT 300               // ms
 #define SHUNT_THRESH_OVERCURRENT 300000 // mA
-#define SHUNT_THRESH_OVERCURRENT_REGEN 50000 // mA
 #define SHUNT_THRESH_OVERTEMP 1000      // 1/10 °C
 
 typedef struct {

Core/Src/can.c

@@ -18,7 +18,6 @@ void can_init(CAN_HandleTypeDef *handle) {
   ftcan_add_filter(CAN_ID_AMS_IN, 0xFFF);
   ftcan_add_filter(CAN_ID_SLAVE_PANIC, 0xFFF);
   ftcan_add_filter(CAN_ID_SLAVE_STATUS_BASE, 0xFF0);
-  ftcan_add_filter(CAN_ID_SLAVE_STATUS_FUCKED, 0xFFF);
   ftcan_add_filter(CAN_ID_SLAVE_LOG, 0xFFF);
 }
 
@@ -51,8 +50,6 @@ void ftcan_msg_received_cb(uint16_t id, size_t datalen, const uint8_t *data) {
   } else if ((id & 0xFF0) == CAN_ID_SLAVE_STATUS_BASE) {
     slaves_handle_status(data);
     return;
-  } else if (id == CAN_ID_SLAVE_STATUS_FUCKED) {
-    slaves_handle_status(data);
   }
   switch (id) {
   case CAN_ID_SLAVE_PANIC:

Core/Src/shunt_monitoring.c

@@ -28,10 +28,9 @@ void shunt_check() {
   if (HAL_GetTick() - shunt_data.last_message > SHUNT_TIMEOUT) {
     is_error = 1;
     can_send_error(TS_ERRORKIND_SHUNT_TIMEOUT, 0);
-  } else if (shunt_data.current >= SHUNT_THRESH_OVERCURRENT ||
+  } else if (shunt_data.current >= SHUNT_THRESH_OVERCURRENT) {
-             shunt_data.current <= -SHUNT_THRESH_OVERCURRENT_REGEN) {
     is_error = 1;
-    can_send_error(TS_ERRORKIND_SHUNT_OVERCURRENT, 0);
+    can_send_error(TS_ERRORKIND_SHUNT_OVERTEMP, 0);
   } else if (shunt_data.busbartemp >= SHUNT_THRESH_OVERTEMP) {
     is_error = 1;
     can_send_error(TS_ERRORKIND_SHUNT_OVERTEMP, 0);

Core/Src/soc_estimation.c

@@ -32,7 +32,7 @@ void soc_init() {
 
 void soc_update() {
   uint32_t now = HAL_GetTick();
-  if (abs(shunt_data.current) >= SOC_ESTIMATION_NO_CURRENT_THRESH) {
+  if (shunt_data.current >= SOC_ESTIMATION_NO_CURRENT_THRESH) {
     last_current_time = now;
     if (!current_was_flowing) {
       soc_before_current = current_soc;
@@ -52,7 +52,7 @@ void soc_update() {
     // Otherwise, use the current counter to update SoC
     float as_delta = shunt_data.current_counter - mAs_before_current;
     float soc_delta = as_delta / SOC_ESTIMATION_BATTERY_CAPACITY * 100;
-    current_soc = soc_before_current - soc_delta;
+    current_soc = soc_before_current + soc_delta;
   }
 }
 

STM32-for-VSCode.config.yaml

@@ -40,7 +40,7 @@ cxxDefinitionsFile:
 asDefinitionsFile:
 
 # Compiler flags
-cFlags: []
+cFlags: [-Wall, -Wextra, -Wno-unused-parameter]
 cxxFlags: []
 assemblyFlags: []
 linkerFlags:

STM32Make.make

@@ -43,6 +43,7 @@ Core/Src/main.c \
 Core/Src/shunt_monitoring.c \
 Core/Src/slave_monitoring.c \
 Core/Src/soc_estimation.c \
+Core/Src/status_led.c \
 Core/Src/stm32f3xx_hal_msp.c \
 Core/Src/stm32f3xx_it.c \
 Core/Src/system_stm32f3xx.c \
@@ -86,7 +87,7 @@ PREFIX = arm-none-eabi-
 POSTFIX = "
 # The gcc compiler bin path can be either defined in make command via GCC_PATH variable (> make GCC_PATH=xxx)
 # either it can be added to the PATH environment variable.
-GCC_PATH="/home/jasper/.config/Code/User/globalStorage/bmd.stm32-for-vscode/@xpack-dev-tools/arm-none-eabi-gcc/11.3.1-1.1.2/.content/bin
+GCC_PATH="/home/kbracher/.vscode-server/data/User/globalStorage/bmd.stm32-for-vscode/@xpack-dev-tools/arm-none-eabi-gcc/12.3.1-1.2.1/.content/bin
 ifdef GCC_PATH
 CXX = $(GCC_PATH)/$(PREFIX)g++$(POSTFIX)
 CC = $(GCC_PATH)/$(PREFIX)gcc$(POSTFIX)
@@ -162,7 +163,7 @@ CXXFLAGS += -g -gdwarf -ggdb
 endif
 
 # Add additional flags
-CFLAGS += 
+CFLAGS += -Wall -Wextra -Wno-unused-parameter 
 ASFLAGS += 
 CXXFLAGS += 
 
@@ -242,13 +243,13 @@ $(BUILD_DIR):
 # flash
 #######################################
 flash: $(BUILD_DIR)/$(TARGET).elf
-	"/home/jasper/.config/Code/User/globalStorage/bmd.stm32-for-vscode/@xpack-dev-tools/openocd/0.11.0-5.1/.content/bin/openocd" -f ./openocd.cfg -c "program $(BUILD_DIR)/$(TARGET).elf verify reset exit"
+	"/home/kbracher/.vscode-server/data/User/globalStorage/bmd.stm32-for-vscode/@xpack-dev-tools/openocd/0.12.0-2.1/.content/bin/openocd" -f ./openocd.cfg -c "program $(BUILD_DIR)/$(TARGET).elf verify reset exit"
 
 #######################################
 # erase
 #######################################
 erase: $(BUILD_DIR)/$(TARGET).elf
-	"/home/jasper/.config/Code/User/globalStorage/bmd.stm32-for-vscode/@xpack-dev-tools/openocd/0.11.0-5.1/.content/bin/openocd" -f ./openocd.cfg -c "init; reset halt; stm32f3x mass_erase 0; exit"
+	"/home/kbracher/.vscode-server/data/User/globalStorage/bmd.stm32-for-vscode/@xpack-dev-tools/openocd/0.12.0-2.1/.content/bin/openocd" -f ./openocd.cfg -c "init; reset halt; stm32f3x mass_erase 0; exit"
 
 #######################################
 # clean up