\documentclass[paper=A3]{article}
\usepackage[utf8]{inputenc}

\usepackage[landscape, left=2cm, right=2cm, top=2cm, bottom=2cm]{geometry}
\usepackage{tikz}
\usetikzlibrary{calc}
\usepackage[european, rotatelabels]{circuitikz}

\usepackage{fancyhdr}
\usepackage{lastpage}

\pagestyle{fancy}
\fancyhf{}

\rhead{\includegraphics*[scale=0.03]{bilder/Fasttube-Logo.png}}

\rfoot{Page \thepage \hspace{1pt} of \pageref{LastPage}}

% Circuitikz settings:
\ctikzset{bipole annotation style/.style={color=black}}
\ctikzset{bipole label style/.style={color=black}}

\begin{document}
\lhead{\large Car 313, 06.03.2025, Rev. 1}
\chead{\large TS Accumulator}
\begin{center}
	\begin{circuitikz}[thick]
		% TODO: ADD Precharge relay name, change AIRs name?, change HV-Stecker name, add molex sexy stecker name
		% HV+ Pfad bis Stecker
		\draw[red] (0,0) -- (6,0)
		to [nos,l={AIR+}, color=black] (8,0)
		to (17,0) node[iecsocketL, color=black](s1){} ;
		% Precharge
		\draw[brown] (2,0)
		to [short,*-,color=black] (2,2)
		to [thRp, l=$R_{precharge}$, color=black, a={$500\Omega, 50W$}] (6,2)
		to [nos,l={Precharge}, color=black] (8,2)
		-- (8.5,2)
		to [short,-*,color=black] (8.5,0);
		% Batterie / AMS
		\draw[red] (0,0) -- (0,-1)
		to [battery,o-o, color=black] (0,-3) -- (0,-4);
		\draw (0,-1) -- (2,-1)
		to [voltmeter, l={AMS}, color=black] (2,-3)
		-- (0,-3);
		\draw[dotted] (0,-4.5) -- (0,-5.5);
		\draw[red] (0,-6) -- (0,-7)
		to [battery,o-o, color=black] (0,-9) -- (0,-10);
		\draw (0,-7) -- (2,-7)
		to [voltmeter, l={AMS}, color=black] (2,-9)
		-- (0,-9);
		\draw[<-] (-0.5,-1) -- (-1.5, -1.5);
		\draw(-3,-2) node[align=left]{Maintenance Plugs \\ Molex \\ 150A};
		\draw[->] (-1.5,-2.5) -- (-0.5, -3); 
		\draw[<-] (-0.5,-8.5) -- (-1.5, -8.5);
		\draw(-4,-8.5) node[align=left]{TS Accumulator Segment \\ Cell: Molicel - INR-21700-P50A \\ Configuration: 16s4p \\ xA};
		% HV- Pfad bis Stecker
		\draw[red] (0,-10)
		to [fuse,l=$100A$, a={Adler-AE53100620}, color=black] (3,-10)
		to [ammeter,a={IVT-300}, color=black] (6,-10)
		to [nos,a={AIR-}, color=black] (8,-10)
		to (17,-10) node[iecsocketL, color=black](s1){} ;
		% AIR
		\draw[<-] (7,-0.5) -- (7, -4);
		\draw(7, -5) node[align=center]{AIRs \\ Tyco Electronics - LEV-100H \\ 150A};
		\draw[->] (7,-6) -- (7, -9.5); 
		% IMD
		\draw[brown] (10,-10)
		to [twoport,*-*, t={IMD}, color=black] (10,0);
		% Indicator
		\draw[brown] (12,-10)
		to [twoport,*-*, t={VI}, color=black] (12,0);
		% Voltage vehicle side
		\draw[brown] (14,-10)
		to [voltmeter,l={to TSAL \& Precharge State Detection},*-*, color=black] (14,0);
		% Connector
		\draw[<-] (17,-0.5) -- (17, -4);
		\draw(17, -5) node[align=center]{TSAC Connector \\ HVSLS600062A116 \\ 120A};
		\draw[->] (17,-6) -- (17, -9.5); 
		
		% LEGEND
		\draw[red] (0,4) -- ++(1,0);
		\draw (1,4) node[right]{$16mm^2$ unshielded Coroflex - 9-2611 FHLR2GCB2G 16, 220A};
		\draw[brown] (0,3.5) -- ++(1,0);
		\draw (1,3.5) node[right]{$0.5mm^2$ unshielded};
	\end{circuitikz}
\end{center}

\newpage
\lhead{\large Car 313, 06.03.2025, Rev. 1}
\chead{\large Vehicle}
\begin{center}
	\begin{circuitikz}[thick]
		% TSAC:
		\draw[dashed] (0,2) -- (1,2) -- (1,-12) -- (0,-12);
		\draw(0,2) node[above]{TS Accumulator};
		% TS-Wiring
		\draw[red] (1,0) node[iecplugR,color=black](s2){}
		to (3,0);
		\draw[red] (1,-10) node[iecplugR,color=black](s2){}
		to (3,-10);
		% HV Box
		\draw[dashed] (3,2) -- (13,2) -- (13,-12) -- (3,-12) -- (3,2);
		\draw(8,2) node[above]{HV-Splitter};
		% Datalogger
		\draw[blue] (3,-10)
		-- (5,-10)
		to [twoport, t=DL, color=black] (11,-10);
		% BSPD
		\draw[blue] (3,0)
		-- (3.5,0)
		to [ammeter,l={to BSPD},a=\shortstack{LEM HO \\ 100-S-0100},color=black] (5.5,0);
		% HVD
		\draw[blue] (5.5,0)
		to [closed jumper, l={HVD}, a=\parbox{3cm}{Hirose \\ EM30MSD A \\ (02)}, color=black] (7.5,0)
		-- (12,0);
		% Fuse
		\draw[teal] (8,0)
		to [short,*-, color=black] ++(0,0)
		to [fuse,l={1A},-*, color=black] (8,-9.5);
		% Discharge
		\draw[brown] (9.5,0)
		to [short,*-,color=black] ++(0,0)
		to[thRp,l={$R_{discharge}$},a={1k$\Omega$}, color=black] (9.5,-5)
		to[ncs,l={Discharge}, color=black] (9.5,-10)
		to [short,*-,color=black] ++(0,0);
		% TSAL
		\draw[brown] (11,0)
		to [voltmeter,l={TSAL}, color=black] (11,-10);
		% TSMPs
		\draw[brown] (11,0)
		to[R,l={15k$\Omega$, 25W},*-, color=black] (13,-4);
		\draw[teal] (13,-4)
		to (14,-4) node[bnc, color=black, xscale=-1](s1){\scalebox{-1}[1]{TSMP+}};
		\draw[brown] (11,-10)
		to [R,l={15k$\Omega$, 25W},*-, color=black] (13,-6);
		\draw[teal] (13,-6)
		to (14,-6) node[bnc, color=black, xscale=-1](s1){\scalebox{-1}[1]{TSMP+}};
		% Inverters
		\draw(17.5,-8) node[tdcacshape](il){};
		\draw(17.5,-4) node[tdcacshape](ir){};
		\draw[orange] let \p1 = (ir.dc1) in (11,0) -- (16.5,0) -- (16.5,\y1) -- (ir.dc1);
		\draw[orange] let \p1 = (il.dc1) in (11,0) -- (12,1) -- (15.5,1) -- (15.5,\y1) -- (il.dc1);
		\draw[orange] let \p1 = (ir.dc2) in (11,-10) -- (16.5,-10) -- (16.5,\y1) -- (ir.dc2);
		\draw[orange] let \p1 = (il.dc2) in (11,-10) -- (12,-11) -- (15.5,-11) -- (15.5,\y1) -- (il.dc2);
		% Motors
		\draw(20,-4) node[elmech](motr){M};
		\draw(20,-8) node[elmech](motl){M};
		\draw[orange] (ir.right)
		to [multiwire = 3, color=orange] (motr.left);
		\draw[orange] (il.right)
		to [multiwire = 3, color=orange] (motl.left);
		
		
		% LEGEND
		\draw[red] (0,4) -- ++(1,0);
		\draw (1,4) node[right]{$16mm^2$ unshielded EAIR ID};
		\draw[blue] (0,3.5) -- ++(1,0);
		\draw (1,3.5) node[right]{$16mm^2$ shielded EAIR ID};
		\draw[orange] (0,3) -- ++(1,0);
		\draw (1,3) node[right]{$6mm^2$ shielded EAIR ID};
		\draw[teal] (10,4) -- ++(1,0);
		\draw (11,4) node[right]{$0.5mm^2$ shielded};
		\draw[brown] (10,3.5) -- ++(1,0);
		\draw (11,3.5) node[right]{$0.5mm^2$ unshielded};
	\end{circuitikz}
\end{center}

\newpage
\lhead{\large Car 313, 06.03.2025, Rev. 1}
\chead{\large Charger}
\begin{center}
	\begin{circuitikz}[thick]
		% Cables
		\draw[blue] (0,-4) -- (0,0)
		to (16,0) node[iecplugL, color=black](s1){} ;
		\draw[blue] (0,-6) -- (0,-10)
		to (16,-10) node[iecplugL, color=black](s1){} ;
		% Housing
		\draw[dashed] (2,1) -- (14,1) -- (14, -11) -- (2,-11) -- (2,1);
		\draw(8,1) node[above]{Charger-Housing};
		% Power-supply
		\draw[brown] (0,-4) to [dcvsource, o-o, align=center, a=Delta Elektronika \\ SM 600-10 \\ 600V/10A, color=black, label/align=straight] (0,-6);
		% Discharge
		\draw[brown] (8,0) -- (8,-2)
		to [thRp,l={1k$\Omega$},color=black] (8,-5)
		to [ncs,l={Discharge},color=black] (8,-8) -- (8,-10);
		% TSMPs
		\draw[brown] (8,0) to [R,l={15k$\Omega$, 20W},o-,color=black] (11,-3) -- (14,-3) node[bnc, color=black, xscale=-1](s1){\hspace{-11mm}\scalebox{-1}[1]{TSMP+}};
		\draw[brown] (8,-10) to [R,l={15k$\Omega$, 20W},o-,color=black] (11,-7) -- (14,-7) node[bnc, color=black, xscale=-1, yscale=-1](s2){\raisebox{2mm}{\hspace{-10mm}\scalebox{-1}[-1]{TSMP-}}};
		
		\draw[<-] (13.75,-3.25) -- (13, -4);
		\draw(12.5, -5) node[align=center]{4mm shrouded \\ banana jacks};
		\draw[->] (13,-6) -- (13.75, -6.75); 
		% Connector
		\draw[<-] (16,-0.5) -- (16, -4);
		\draw(16, -5) node[align=center]{TSAC Connector \\ HVSLS600062A116 \\ 120A};
		\draw[->] (16,-6) -- (16, -9.5); 
		
		% LEGEND
		\draw[blue] (0,4) -- ++(1,0);
		\draw (1,4) node[right]{$16mm^2$ shielded - Coroflex 9-2611 FHLR2GCB2G 16, 220A};
		\draw[brown] (0,3.5) -- ++(1,0);
		\draw (1,3.5) node[right]{$0.5mm^2$ unshielded};
	\end{circuitikz}
\end{center}
\end{document}