/**
******************************************************************************
* @file stm32f3xx_hal_flash_ex.h
* @author MCD Application Team
* @brief Header file of Flash HAL Extended module.
******************************************************************************
* @attention
*
*
© Copyright (c) 2016 STMicroelectronics.
* All rights reserved.
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F3xx_HAL_FLASH_EX_H
#define __STM32F3xx_HAL_FLASH_EX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f3xx_hal_def.h"
/** @addtogroup STM32F3xx_HAL_Driver
* @{
*/
/** @addtogroup FLASHEx
* @{
*/
/** @addtogroup FLASHEx_Private_Constants
* @{
*/
#define FLASH_SIZE_DATA_REGISTER (0x1FFFF7CCU)
/**
* @}
*/
/** @addtogroup FLASHEx_Private_Macros
* @{
*/
#define IS_FLASH_TYPEERASE(VALUE) (((VALUE) == FLASH_TYPEERASE_PAGES) || \
((VALUE) == FLASH_TYPEERASE_MASSERASE))
#define IS_OPTIONBYTE(VALUE) ((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_DATA))
#define IS_WRPSTATE(VALUE) (((VALUE) == OB_WRPSTATE_DISABLE) || \
((VALUE) == OB_WRPSTATE_ENABLE))
#define IS_OB_DATA_ADDRESS(ADDRESS) (((ADDRESS) == OB_DATA_ADDRESS_DATA0) || ((ADDRESS) == OB_DATA_ADDRESS_DATA1))
#define IS_OB_RDP_LEVEL(LEVEL) (((LEVEL) == OB_RDP_LEVEL_0) ||\
((LEVEL) == OB_RDP_LEVEL_1))/*||\
((LEVEL) == OB_RDP_LEVEL_2))*/
#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW))
#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST))
#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST))
#define IS_OB_BOOT1(BOOT1) (((BOOT1) == OB_BOOT1_RESET) || ((BOOT1) == OB_BOOT1_SET))
#define IS_OB_VDDA_ANALOG(ANALOG) (((ANALOG) == OB_VDDA_ANALOG_ON) || ((ANALOG) == OB_VDDA_ANALOG_OFF))
#define IS_OB_SRAM_PARITY(PARITY) (((PARITY) == OB_SRAM_PARITY_SET) || ((PARITY) == OB_SRAM_PARITY_RESET))
#if defined(FLASH_OBR_SDADC12_VDD_MONITOR)
#define IS_OB_SDACD_VDD_MONITOR(VDD_MONITOR) (((VDD_MONITOR) == OB_SDACD_VDD_MONITOR_SET) || \
((VDD_MONITOR) == OB_SDACD_VDD_MONITOR_RESET))
#endif /* FLASH_OBR_SDADC12_VDD_MONITOR */
#define IS_OB_WRP(PAGE) (((PAGE) != 0x0000000U))
#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) \
|| defined(STM32F373xC) || defined(STM32F378xx)
#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x100U) ? \
((ADDRESS) <= 0x0803FFFFU) : (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80U) ? \
((ADDRESS) <= 0x0801FFFFU) : ((ADDRESS) <= 0x0800FFFFU))))
#endif /* STM32F302xC || STM32F303xC || STM32F358xx || */
/* STM32F373xC || STM32F378xx */
#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && ((ADDRESS) <= 0x0807FFFFU))
#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) \
|| defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x40U) ? \
((ADDRESS) <= 0x0800FFFFU) : (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20U) ? \
((ADDRESS) <= 0x08007FFFU) : ((ADDRESS) <= 0x08003FFFU))))
#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
/* STM32F303x8 || STM32F334x8 || STM32F328xx */
#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) \
|| defined(STM32F373xC) || defined(STM32F378xx)
#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x100U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1U <= 0x0803FFFFU) : \
(((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1U <= 0x0801FFFFU) : \
((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1U <= 0x0800FFFFU)))
#endif /* STM32F302xC || STM32F303xC || STM32F358xx || */
/* STM32F373xC || STM32F378xx */
#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1U <= 0x0807FFFFU)
#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) \
|| defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x40U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1U <= 0x0800FFFFU) : \
(((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1U <= 0x08007FFFU) : \
((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1U <= 0x08003FFFU)))
#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
/* STM32F303x8 || STM32F334x8 || STM32F328xx */
/**
* @}
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup FLASHEx_Exported_Types FLASHEx Exported Types
* @{
*/
/**
* @brief FLASH Erase structure definition
*/
typedef struct
{
uint32_t TypeErase; /*!< TypeErase: Mass erase or page erase.
This parameter can be a value of @ref FLASHEx_Type_Erase */
uint32_t PageAddress; /*!< PageAdress: Initial FLASH page address to erase when mass erase is disabled
This parameter must be a number between Min_Data = FLASH_BASE and Max_Data = FLASH_BANK1_END */
uint32_t NbPages; /*!< NbPages: Number of pagess to be erased.
This parameter must be a value between Min_Data = 1 and Max_Data = (max number of pages - value of initial page)*/
} FLASH_EraseInitTypeDef;
/**
* @brief FLASH Options bytes program structure definition
*/
typedef struct
{
uint32_t OptionType; /*!< OptionType: Option byte to be configured.
This parameter can be a value of @ref FLASHEx_OB_Type */
uint32_t WRPState; /*!< WRPState: Write protection activation or deactivation.
This parameter can be a value of @ref FLASHEx_OB_WRP_State */
uint32_t WRPPage; /*!< WRPPage: specifies the page(s) to be write protected
This parameter can be a value of @ref FLASHEx_OB_Write_Protection */
uint8_t RDPLevel; /*!< RDPLevel: Set the read protection level..
This parameter can be a value of @ref FLASHEx_OB_Read_Protection */
uint8_t USERConfig; /*!< USERConfig: Program the FLASH User Option Byte:
IWDG / STOP / STDBY / BOOT1 / VDDA_ANALOG / SRAM_PARITY / SDADC12_VDD_MONITOR
This parameter can be a combination of @ref FLASHEx_OB_IWatchdog, @ref FLASHEx_OB_nRST_STOP,
@ref FLASHEx_OB_nRST_STDBY, @ref FLASHEx_OB_BOOT1, @ref FLASHEx_OB_VDDA_Analog_Monitoring,
@ref FLASHEx_OB_RAM_Parity_Check_Enable.
@if STM32F373xC
And @ref FLASHEx_OB_SDADC12_VDD_MONITOR (only for STM32F373xC & STM32F378xx devices)
@endif
@if STM32F378xx
And @ref FLASHEx_OB_SDADC12_VDD_MONITOR (only for STM32F373xC & STM32F378xx devices)
@endif
*/
uint32_t DATAAddress; /*!< DATAAddress: Address of the option byte DATA to be programmed
This parameter can be a value of @ref FLASHEx_OB_Data_Address */
uint8_t DATAData; /*!< DATAData: Data to be stored in the option byte DATA
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFFU */
} FLASH_OBProgramInitTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup FLASHEx_Exported_Constants FLASHEx Exported Constants
* @{
*/
/** @defgroup FLASHEx_Page_Size FLASHEx Page Size
* @{
*/
#define FLASH_PAGE_SIZE 0x800
/**
* @}
*/
/** @defgroup FLASHEx_Type_Erase FLASH Type Erase
* @{
*/
#define FLASH_TYPEERASE_PAGES (0x00U) /*!