diff --git a/.mxproject b/.mxproject
index 2f2bb19..5477047 100644
--- a/.mxproject
+++ b/.mxproject
@@ -1,8 +1,8 @@
 [PreviousLibFiles]
-LibFiles=Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_adc.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_adc.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_adc_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_def.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_rcc.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_rcc_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_bus.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_rcc.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_crs.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_system.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_utils.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_gpio.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_gpio_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_gpio.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_dma_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_dma.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_dma.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_cortex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_cortex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_pwr.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_pwr_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_pwr.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_flash.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_flash_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_i2c.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_i2c_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_exti.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_exti.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_can.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_i2c.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_iwdg.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_iwdg.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_tim.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_tim_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_tim.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_uart.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_usart.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_uart_ex.h;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_adc.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_adc_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_rcc.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_rcc_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_gpio.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_dma.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_cortex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_pwr.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_pwr_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_flash.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_flash_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_i2c.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_i2c_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_exti.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_can.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_iwdg.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_tim.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_tim_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_uart.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_uart_ex.c;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_adc.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_adc.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_adc_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_def.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_rcc.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_rcc_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_bus.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_rcc.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_crs.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_system.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_utils.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_gpio.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_gpio_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_gpio.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_dma_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_dma.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_dma.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_cortex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_cortex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_pwr.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_pwr_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_pwr.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_flash.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_flash_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_i2c.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_i2c_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_exti.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_exti.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_can.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_i2c.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_iwdg.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_iwdg.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_tim.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_tim_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_tim.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_uart.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_usart.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_uart_ex.h;Drivers\CMSIS\Device\ST\STM32F3xx\Include\stm32f302xc.h;Drivers\CMSIS\Device\ST\STM32F3xx\Include\stm32f3xx.h;Drivers\CMSIS\Device\ST\STM32F3xx\Include\system_stm32f3xx.h;Drivers\CMSIS\Device\ST\STM32F3xx\Source\Templates\system_stm32f3xx.c;Drivers\CMSIS\Include\cmsis_armcc.h;Drivers\CMSIS\Include\cmsis_armclang.h;Drivers\CMSIS\Include\cmsis_compiler.h;Drivers\CMSIS\Include\cmsis_gcc.h;Drivers\CMSIS\Include\cmsis_iccarm.h;Drivers\CMSIS\Include\cmsis_version.h;Drivers\CMSIS\Include\core_armv8mbl.h;Drivers\CMSIS\Include\core_armv8mml.h;Drivers\CMSIS\Include\core_cm0.h;Drivers\CMSIS\Include\core_cm0plus.h;Drivers\CMSIS\Include\core_cm1.h;Drivers\CMSIS\Include\core_cm23.h;Drivers\CMSIS\Include\core_cm3.h;Drivers\CMSIS\Include\core_cm33.h;Drivers\CMSIS\Include\core_cm4.h;Drivers\CMSIS\Include\core_cm7.h;Drivers\CMSIS\Include\core_sc000.h;Drivers\CMSIS\Include\core_sc300.h;Drivers\CMSIS\Include\mpu_armv7.h;Drivers\CMSIS\Include\mpu_armv8.h;Drivers\CMSIS\Include\tz_context.h;
+LibFiles=Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_adc.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_adc.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_adc_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_def.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_rcc.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_rcc_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_bus.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_rcc.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_crs.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_system.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_utils.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_gpio.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_gpio_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_gpio.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_dma_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_dma.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_dma.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_cortex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_cortex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_pwr.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_pwr_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_pwr.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_flash.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_flash_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_i2c.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_i2c_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_exti.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_exti.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_can.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_i2c.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_tim.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_tim_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_tim.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_uart.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_usart.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_uart_ex.h;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_adc.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_adc_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_rcc.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_rcc_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_gpio.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_dma.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_cortex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_pwr.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_pwr_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_flash.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_flash_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_i2c.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_i2c_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_exti.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_can.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_tim.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_tim_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_uart.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_uart_ex.c;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_adc.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_adc.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_adc_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_def.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_rcc.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_rcc_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_bus.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_rcc.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_crs.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_system.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_utils.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_gpio.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_gpio_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_gpio.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_dma_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_dma.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_dma.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_cortex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_cortex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_pwr.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_pwr_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_pwr.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_flash.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_flash_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_i2c.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_i2c_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_exti.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_exti.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_can.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_i2c.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_tim.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_tim_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_tim.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_uart.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_usart.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_uart_ex.h;Drivers\CMSIS\Device\ST\STM32F3xx\Include\stm32f302xc.h;Drivers\CMSIS\Device\ST\STM32F3xx\Include\stm32f3xx.h;Drivers\CMSIS\Device\ST\STM32F3xx\Include\system_stm32f3xx.h;Drivers\CMSIS\Device\ST\STM32F3xx\Source\Templates\system_stm32f3xx.c;Drivers\CMSIS\Include\cmsis_armcc.h;Drivers\CMSIS\Include\cmsis_armclang.h;Drivers\CMSIS\Include\cmsis_compiler.h;Drivers\CMSIS\Include\cmsis_gcc.h;Drivers\CMSIS\Include\cmsis_iccarm.h;Drivers\CMSIS\Include\cmsis_version.h;Drivers\CMSIS\Include\core_armv8mbl.h;Drivers\CMSIS\Include\core_armv8mml.h;Drivers\CMSIS\Include\core_cm0.h;Drivers\CMSIS\Include\core_cm0plus.h;Drivers\CMSIS\Include\core_cm1.h;Drivers\CMSIS\Include\core_cm23.h;Drivers\CMSIS\Include\core_cm3.h;Drivers\CMSIS\Include\core_cm33.h;Drivers\CMSIS\Include\core_cm4.h;Drivers\CMSIS\Include\core_cm7.h;Drivers\CMSIS\Include\core_sc000.h;Drivers\CMSIS\Include\core_sc300.h;Drivers\CMSIS\Include\mpu_armv7.h;Drivers\CMSIS\Include\mpu_armv8.h;Drivers\CMSIS\Include\tz_context.h;
 
 [PreviousUsedMakefileFiles]
-SourceFiles=Core\Src\main.c;Core\Src\stm32f3xx_it.c;Core\Src\stm32f3xx_hal_msp.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_adc.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_adc_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_rcc.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_rcc_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_gpio.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_dma.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_cortex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_pwr.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_pwr_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_flash.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_flash_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_i2c.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_i2c_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_exti.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_can.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_iwdg.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_tim.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_tim_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_uart.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_uart_ex.c;Drivers\CMSIS\Device\ST\STM32F3xx\Source\Templates\system_stm32f3xx.c;Core\Src\system_stm32f3xx.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_adc.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_adc_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_rcc.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_rcc_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_gpio.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_dma.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_cortex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_pwr.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_pwr_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_flash.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_flash_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_i2c.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_i2c_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_exti.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_can.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_iwdg.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_tim.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_tim_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_uart.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_uart_ex.c;Drivers\CMSIS\Device\ST\STM32F3xx\Source\Templates\system_stm32f3xx.c;Core\Src\system_stm32f3xx.c;;;
+SourceFiles=Core\Src\main.c;Core\Src\stm32f3xx_it.c;Core\Src\stm32f3xx_hal_msp.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_adc.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_adc_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_rcc.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_rcc_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_gpio.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_dma.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_cortex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_pwr.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_pwr_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_flash.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_flash_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_i2c.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_i2c_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_exti.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_can.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_tim.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_tim_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_uart.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_uart_ex.c;Drivers\CMSIS\Device\ST\STM32F3xx\Source\Templates\system_stm32f3xx.c;Core\Src\system_stm32f3xx.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_adc.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_adc_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_rcc.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_rcc_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_gpio.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_dma.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_cortex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_pwr.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_pwr_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_flash.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_flash_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_i2c.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_i2c_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_exti.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_can.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_tim.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_tim_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_uart.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_uart_ex.c;Drivers\CMSIS\Device\ST\STM32F3xx\Source\Templates\system_stm32f3xx.c;Core\Src\system_stm32f3xx.c;;;
 HeaderPath=Drivers\STM32F3xx_HAL_Driver\Inc;Drivers\STM32F3xx_HAL_Driver\Inc\Legacy;Drivers\CMSIS\Device\ST\STM32F3xx\Include;Drivers\CMSIS\Include;Core\Inc;
 CDefines=USE_HAL_DRIVER;STM32F302xC;USE_HAL_DRIVER;USE_HAL_DRIVER;
 
diff --git a/Core/Inc/CAN_Communication.h b/Core/Inc/CAN_Communication.h
index be85083..9e1344f 100644
--- a/Core/Inc/CAN_Communication.h
+++ b/Core/Inc/CAN_Communication.h
@@ -20,6 +20,7 @@
 #define CUR_CHANNELS_2_ID 0xCB
 #define CUR_CHANNELS_3_ID 0xCC
 #define CUR_CHANNELS_4_ID 0xCD
+#define LV_SENS_ID 0xCE
 
 typedef struct {
   PortExtenderGPIO iostatus;
diff --git a/Core/Inc/Current_Monitoring.h b/Core/Inc/Current_Monitoring.h
index aaad04b..7ebaeb8 100644
--- a/Core/Inc/Current_Monitoring.h
+++ b/Core/Inc/Current_Monitoring.h
@@ -10,8 +10,13 @@
 
 #include "stm32f3xx_hal.h"
 
+// Convert ADC quants to V
+#define ADC_V_FACTOR (3.3f / 4096)
+// Scale to LV by divider to mV
+#define LV_SENSE_FACTOR (1e3 * (ADC_V_FACTOR * ((27.f+8.2f)/8.2f)))
+
 // Convert ADC quants to I_S in mA
-#define CURR_SENSE_IS_FACTOR  ((3.3f / 4096) / 1.2f) // 3.3V / 12bit / 1.2kOhm
+#define CURR_SENSE_IS_FACTOR  (ADC_V_FACTOR / 1.2f) // 3.3V / 12bit / 1.2kOhm
 // Convert ADC quants to I_L in mA
 #define CURR_SENSE_FACTOR_5A  (3700 * CURR_SENSE_IS_FACTOR)
 #define CURR_SENSE_FACTOR_7_5A (5450 * CURR_SENSE_IS_FACTOR)
@@ -36,6 +41,7 @@ typedef struct {
   uint16_t ebsvalve_a;
   uint16_t ebsvalve_b;
   uint16_t cooling_pump;
+  uint16_t lv_v;
 } CurrentMeasurements;
 
 void currentMonitor_init(ADC_HandleTypeDef* hadc1, ADC_HandleTypeDef* hadc2,
diff --git a/Core/Inc/main.h b/Core/Inc/main.h
index 3c0360c..13f25c2 100644
--- a/Core/Inc/main.h
+++ b/Core/Inc/main.h
@@ -75,6 +75,8 @@ void Error_Handler(void);
 #define isense3_GPIO_Port GPIOA
 #define isense7_Pin GPIO_PIN_3
 #define isense7_GPIO_Port GPIOA
+#define isense9_Pin GPIO_PIN_4
+#define isense9_GPIO_Port GPIOF
 #define isense2_Pin GPIO_PIN_4
 #define isense2_GPIO_Port GPIOA
 #define isense1_Pin GPIO_PIN_5
@@ -83,6 +85,8 @@ void Error_Handler(void);
 #define isense10_GPIO_Port GPIOA
 #define isense4_Pin GPIO_PIN_7
 #define isense4_GPIO_Port GPIOA
+#define LV_sens_Pin GPIO_PIN_4
+#define LV_sens_GPIO_Port GPIOC
 #define GSS_GPIO_Pin GPIO_PIN_0
 #define GSS_GPIO_GPIO_Port GPIOB
 #define DSEL_3_Pin GPIO_PIN_12
diff --git a/Core/Inc/stm32f3xx_hal_conf.h b/Core/Inc/stm32f3xx_hal_conf.h
index 1349329..387269d 100644
--- a/Core/Inc/stm32f3xx_hal_conf.h
+++ b/Core/Inc/stm32f3xx_hal_conf.h
@@ -51,7 +51,7 @@
 /*#define HAL_CRYP_MODULE_ENABLED   */
 /*#define HAL_DAC_MODULE_ENABLED   */
 /*#define HAL_I2S_MODULE_ENABLED   */
-#define HAL_IWDG_MODULE_ENABLED
+/*#define HAL_IWDG_MODULE_ENABLED   */
 /*#define HAL_LCD_MODULE_ENABLED   */
 /*#define HAL_LPTIM_MODULE_ENABLED   */
 /*#define HAL_RNG_MODULE_ENABLED   */
diff --git a/Core/Inc/stm32f3xx_it.h b/Core/Inc/stm32f3xx_it.h
index c96778f..eb69cde 100644
--- a/Core/Inc/stm32f3xx_it.h
+++ b/Core/Inc/stm32f3xx_it.h
@@ -56,9 +56,11 @@ void DebugMon_Handler(void);
 void PendSV_Handler(void);
 void SysTick_Handler(void);
 void DMA1_Channel1_IRQHandler(void);
+void ADC1_2_IRQHandler(void);
 void USB_LP_CAN_RX0_IRQHandler(void);
 void CAN_RX1_IRQHandler(void);
 void CAN_SCE_IRQHandler(void);
+void TIM6_DAC_IRQHandler(void);
 void DMA2_Channel1_IRQHandler(void);
 /* USER CODE BEGIN EFP */
 
diff --git a/Core/Src/CAN_Communication.c b/Core/Src/CAN_Communication.c
index 217349a..cb37feb 100644
--- a/Core/Src/CAN_Communication.c
+++ b/Core/Src/CAN_Communication.c
@@ -13,8 +13,9 @@ volatile uint8_t canmsg_received = 0;
 extern PortExtenderGPIO EN_Ports;
 extern CurrentMeasurements current_measurements_adc_val;
 
+//extern IWDG_HandleTypeDef hiwdg;
+extern uint32_t lastheartbeat;
 extern int inhibit_SDC;
-extern IWDG_HandleTypeDef hiwdg;
 
 void can_init(CAN_HandleTypeDef* hcan) {
   ftcan_init(hcan);
@@ -31,13 +32,12 @@ void can_sendloop() {
   status_data[3] = rxstate.radiatorfans;
   status_data[4] = rxstate.pwmaggregat;
   status_data[5] = rxstate.cooling_pump;
-  status_data[6] = 0xFF ^ rxstate.checksum;
+  status_data[6] = !inhibit_SDC; // Now means "WD Okay". TODO: Change DBC
   ftcan_transmit(TX_STATUS_MSG_ID, status_data, 7);
 
   uint8_t data[8];
-return;
-  if (additionaltxcouter < 4) {
-    switch (additionaltxcouter) {
+
+  switch (additionaltxcouter) {
     case 0:
 
       data[0] = current_measurements_adc_val.always_on >> 8;
@@ -90,27 +90,38 @@ return;
       ftcan_transmit(CUR_CHANNELS_4_ID, data, 8);
 
       break;
+
+    case 4:
+
+      data[0] = current_measurements_adc_val.lv_v >> 8;
+      data[1] = current_measurements_adc_val.lv_v && 0xFF;
+      ftcan_transmit(LV_SENS_ID, data, 2);
+
     default:
       break;
-    }
-    additionaltxcouter++;
-  } else {
-    additionaltxcouter = 0;
   }
+  
+  additionaltxcouter = (additionaltxcouter+1) % 5;
+
 }
 
 void ftcan_msg_received_cb(uint16_t id, size_t datalen, const uint8_t* data) {
+
   canmsg_received = 1;
+
   if ((id == RX_STATUS_MSG_ID) && (datalen == 7)) {
-    rxstate.iostatus.porta.porta = data[0];
-    rxstate.iostatus.portb.portb = data[1];
-    rxstate.radiatorfans = data[2];
-    rxstate.tsacfans = data[3];
-    rxstate.pwmaggregat = data[4];
-    rxstate.cooling_pump = data[5];
-    rxstate.checksum = data[6];
+    rxstate.iostatus.porta.porta    = data[0];
+    rxstate.iostatus.portb.portb    = data[1];
+    rxstate.radiatorfans            = data[2];
+    rxstate.tsacfans                = data[3];
+    rxstate.pwmaggregat             = data[4];
+    rxstate.cooling_pump            = data[5];
+    rxstate.checksum                = data[6];
+  }
+
+  if (id == RX_STATUS_HEARTBEAT) {
+    lastheartbeat = HAL_GetTick();
+    inhibit_SDC = 0;
   }
 
-  if (id == RX_STATUS_HEARTBEAT)
-	  HAL_IWDG_Refresh(&hiwdg);
 }
diff --git a/Core/Src/Channel_Control.c b/Core/Src/Channel_Control.c
index bc52e79..d82ca09 100644
--- a/Core/Src/Channel_Control.c
+++ b/Core/Src/Channel_Control.c
@@ -71,7 +71,7 @@ void ChannelControl_UpdatePWMs(
   }
 
   if (timer2_running) {
-    if ( (tsacfans == 0) || (pwmaggregat == 0) ) {
+    if ( (tsacfans == 0) && (pwmaggregat == 0) ) {
       timer2_running = 0;
       HAL_TIM_PWM_Stop(pwmtimer2, TIM_CHANNEL_2);
       HAL_TIM_PWM_Stop(pwmtimer2, TIM_CHANNEL_3);
diff --git a/Core/Src/Current_Monitoring.c b/Core/Src/Current_Monitoring.c
index 994e894..de83e45 100644
--- a/Core/Src/Current_Monitoring.c
+++ b/Core/Src/Current_Monitoring.c
@@ -10,29 +10,30 @@
 
 volatile union adc1_channels {
   struct {
-    uint16_t isense12;  // acu
-    uint16_t isense11;  // epsc
-    uint16_t isense6;   // radiator fans 
-    uint16_t isense13;  // tsac fans 
-    uint16_t isense5;   // gss and lidar 
-    uint16_t isense3;   // sdc and always on 
-    uint16_t isense7;   // misc and inverters
+    uint16_t isense5;   // LiDAR | GSS  (DSEL7)
+    uint16_t isense3;   // AlwaysOn | SDC  (DSEL4)
+    uint16_t isense7;   // Misc | Inverters  (DSEL5)
+    uint16_t isense9;   // DRS
+    uint16_t isense12;  // ACU 
+    uint16_t isense11;  // EPSC = ELIAS 
+    uint16_t isense6;   // Radiator Fans
+    uint16_t isense13;  // TSAC Fans
   } adcbank1;
 
-  uint16_t adcbuffer[7]; // array 7*16 bit
+  uint16_t adcbuffer[8]; // array 8*16 bit
  
 } adc_channels1;
 // ADC's anpassen adc1 - 9, adc2 ist halt 5 , buffer anpassen und namen auch ( isense usw)
 volatile union adc2_channels {
   struct {
-    uint16_t isense2;    // ebs valve a and ebs valve b 
-    uint16_t isense1;    // ebs cs valve 
-    uint16_t isense10;   // hyr aggregat 
-    uint16_t isense4;     // cooling pump and reserved 
-
+    uint16_t isense2;    // EBS A | EBS B  (DSEL3)
+    uint16_t isense1;    // EBS CS
+    uint16_t isense10;   // Hydraulic Aggregate 
+    uint16_t isense4;    // Water Pump | Reserved  (DSEL8)
+    uint16_t lv_sens;    // LV voltage
   } adcbank1;
 
-  uint16_t adcbuffer[4];
+  uint16_t adcbuffer[5];
 
 } adc_channels2;
 
@@ -46,82 +47,97 @@ ADC_HandleTypeDef* adc2;
 
 void currentMonitor_init(ADC_HandleTypeDef* hadc1, ADC_HandleTypeDef* hadc2, // init ist initilisierung 
                          TIM_HandleTypeDef* trigtim) {
-  HAL_GPIO_WritePin(DSEL_3_GPIO_Port, DSEL_3_Pin, adcbank2); //DSELs zu adc's neu zuordnen 
-  HAL_GPIO_WritePin(DSEL_4_GPIO_Port, DSEL_4_Pin, adcbank2);
+  HAL_GPIO_WritePin(DSEL_3_GPIO_Port, DSEL_3_Pin, adcbank2);
+  HAL_GPIO_WritePin(DSEL_4_GPIO_Port, DSEL_4_Pin, adcbank1);
   HAL_GPIO_WritePin(DSEL_5_GPIO_Port, DSEL_5_Pin, adcbank1);
   HAL_GPIO_WritePin(DSEL_7_GPIO_Port, DSEL_7_Pin, adcbank1);
   HAL_GPIO_WritePin(DSEL_8_GPIO_Port, DSEL_8_Pin, adcbank2);
   adc1 = hadc1;
   adc2 = hadc2;
   HAL_TIM_Base_Start(trigtim);
-  HAL_ADC_Start_DMA(hadc1, (uint32_t*)adc_channels1.adcbuffer, 7);
-  HAL_ADC_Start_DMA(hadc2, (uint32_t*)adc_channels2.adcbuffer, 7); // wie adc mit dma geht , red mit jasper
+  HAL_ADC_Start_DMA(hadc1, (uint32_t*)adc_channels1.adcbuffer, 8);
+  HAL_ADC_Start_DMA(hadc2, (uint32_t*)adc_channels2.adcbuffer, 5); // wie adc mit dma geht , red mit jasper
 }
 
 uint8_t currentMonitor_checklimits() { return 0; }
 
 void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc) {
+
+  if (hadc == adc1) {
+
+    if (adcbank1 == GPIO_PIN_RESET) {
+
+      current_measurements_adc_val.lidar      =
+          adc_channels1.adcbank1.isense5 * CURR_SENSE_FACTOR_7_5A;
+      current_measurements_adc_val.always_on  =
+          adc_channels1.adcbank1.isense3 * CURR_SENSE_FACTOR_5A;
+      current_measurements_adc_val.misc       =
+          adc_channels1.adcbank1.isense7 * CURR_SENSE_FACTOR_7_5A; 
+    
+      adcbank1 = GPIO_PIN_SET;
+
+    } else {
+
+      current_measurements_adc_val.gss        =
+          adc_channels1.adcbank1.isense5 * CURR_SENSE_FACTOR_7_5A;
+      current_measurements_adc_val.sdc        =
+          adc_channels1.adcbank1.isense3 * CURR_SENSE_FACTOR_5A;
+      current_measurements_adc_val.inverters  =
+          adc_channels1.adcbank1.isense7 * CURR_SENSE_FACTOR_7_5A; 
+
+      adcbank1 = GPIO_PIN_RESET;
+
+    }
+
+    current_measurements_adc_val.servos         =
+        adc_channels1.adcbank1.isense9  * CURR_SENSE_FACTOR_21A;
+    current_measurements_adc_val.acu            =
+        adc_channels1.adcbank1.isense12 * CURR_SENSE_FACTOR_31A;
+    current_measurements_adc_val.epsc           =
+        adc_channels1.adcbank1.isense11 * CURR_SENSE_FACTOR_21A;
+    current_measurements_adc_val.radiator_fans  =
+        adc_channels1.adcbank1.isense6  * CURR_SENSE_FACTOR_21A;
+    current_measurements_adc_val.tsac_fans      =
+        adc_channels1.adcbank1.isense13 * CURR_SENSE_FACTOR_31A;
+
+    HAL_GPIO_WritePin(DSEL_4_GPIO_Port, DSEL_4_Pin, adcbank1); 
+    HAL_GPIO_WritePin(DSEL_5_GPIO_Port, DSEL_5_Pin, adcbank1);                 
+    HAL_GPIO_WritePin(DSEL_7_GPIO_Port, DSEL_7_Pin, adcbank1); 
+
+  }
+  else
   if (hadc == adc2) {
+
     if (adcbank2 == GPIO_PIN_RESET) {
-      current_measurements_adc_val.ebsvalve_a =
+
+      current_measurements_adc_val.ebsvalve_a   =
           adc_channels2.adcbank1.isense2 * CURR_SENSE_FACTOR_5A;
       current_measurements_adc_val.cooling_pump =
           adc_channels2.adcbank1.isense4 * CURR_SENSE_FACTOR_7_5A;
-      adcbank2 = GPIO_PIN_SET;
-    } else {
-      current_measurements_adc_val.ebsvalve_b =
-          adc_channels2.adcbank1.isense2 * CURR_SENSE_FACTOR_5A;
-      current_measurements_adc_val.reserved =
-          adc_channels2.adcbank1.isense4 * CURR_SENSE_FACTOR_7_5A;
-      adcbank2 = GPIO_PIN_RESET;
-    }
-    current_measurements_adc_val.ebs_cs_valve =
-        adc_channels2.adcbank1.isense1 * CURR_SENSE_FACTOR_5A;
-    current_measurements_adc_val.aggregat =
-        adc_channels2.adcbank1.isense10 * CURR_SENSE_FACTOR_21A;
 
-    HAL_GPIO_WritePin(DSEL_3_GPIO_Port, DSEL_3_Pin,
-                      adcbank2);
-    HAL_GPIO_WritePin(DSEL_8_GPIO_Port, DSEL_8_Pin,
-                      adcbank2);
+      adcbank2 = GPIO_PIN_SET;
+
+    } else {
+
+      current_measurements_adc_val.ebsvalve_b   =
+          adc_channels2.adcbank1.isense2 * CURR_SENSE_FACTOR_5A;
+      current_measurements_adc_val.reserved     =
+          adc_channels2.adcbank1.isense4 * CURR_SENSE_FACTOR_7_5A;
+
+      adcbank2 = GPIO_PIN_RESET;
+
+    }
+
+    current_measurements_adc_val.ebs_cs_valve =
+        adc_channels2.adcbank1.isense1  * CURR_SENSE_FACTOR_5A;
+    current_measurements_adc_val.aggregat     =
+        adc_channels2.adcbank1.isense10 * CURR_SENSE_FACTOR_21A;
+    current_measurements_adc_val.lv_v         =
+        adc_channels2.adcbank1.lv_sens  * LV_SENSE_FACTOR;
+
+    HAL_GPIO_WritePin(DSEL_3_GPIO_Port, DSEL_3_Pin, adcbank2);
+    HAL_GPIO_WritePin(DSEL_8_GPIO_Port, DSEL_8_Pin, adcbank2);
+
   }
 
-  if (hadc == adc1) {
-    if (adcbank1 == GPIO_PIN_RESET) {
-      current_measurements_adc_val.sdc=
-          adc_channels1.adcbank1.isense3 * CURR_SENSE_FACTOR_5A;
-      current_measurements_adc_val.misc=
-          adc_channels1.adcbank1.isense7 * CURR_SENSE_FACTOR_7_5A; 
-      current_measurements_adc_val.gss=
-          adc_channels1.adcbank1.isense5 * CURR_SENSE_FACTOR_7_5A; 
-    
-      adcbank1 = GPIO_PIN_SET;
-    } else {
-      current_measurements_adc_val.always_on =
-          adc_channels1.adcbank1.isense3 * CURR_SENSE_FACTOR_5A;
-      current_measurements_adc_val.inverters =
-          adc_channels1.adcbank1.isense7 * CURR_SENSE_FACTOR_7_5A; 
-      current_measurements_adc_val.lidar=
-          adc_channels1.adcbank1.isense5 * CURR_SENSE_FACTOR_7_5A; 
-      adcbank1 = GPIO_PIN_RESET;
-    }
-    current_measurements_adc_val.acu=
-        adc_channels1.adcbank1.isense12 * CURR_SENSE_FACTOR_31A;
-    current_measurements_adc_val.epsc =
-        adc_channels1.adcbank1.isense11 * CURR_SENSE_FACTOR_21A;
-    current_measurements_adc_val.tsac_fans =
-        adc_channels1.adcbank1.isense13 * CURR_SENSE_FACTOR_31A;
-    current_measurements_adc_val.radiator_fans=
-          adc_channels1.adcbank1.isense6 * CURR_SENSE_FACTOR_21A; 
-
-    HAL_GPIO_WritePin(DSEL_4_GPIO_Port, DSEL_4_Pin,
-                      adcbank1); 
-    HAL_GPIO_WritePin(DSEL_5_GPIO_Port, DSEL_5_Pin,
-                      adcbank1);                 
-    HAL_GPIO_WritePin(DSEL_7_GPIO_Port, DSEL_7_Pin,
-                      adcbank1); 
-   }
-}
- 
-
- // current monitoring c und h anpassen 
\ No newline at end of file
+}
\ No newline at end of file
diff --git a/Core/Src/main.c b/Core/Src/main.c
index 400831c..8da0b2f 100644
--- a/Core/Src/main.c
+++ b/Core/Src/main.c
@@ -51,8 +51,6 @@ CAN_HandleTypeDef hcan;
 
 I2C_HandleTypeDef hi2c1;
 
-IWDG_HandleTypeDef hiwdg;
-
 TIM_HandleTypeDef htim2;
 TIM_HandleTypeDef htim3;
 TIM_HandleTypeDef htim6;
@@ -75,7 +73,6 @@ static void MX_TIM3_Init(void);
 static void MX_I2C1_Init(void);
 static void MX_USART1_UART_Init(void);
 static void MX_TIM6_Init(void);
-static void MX_IWDG_Init(void);
 /* USER CODE BEGIN PFP */
 
 /* USER CODE END PFP */
@@ -83,11 +80,12 @@ static void MX_IWDG_Init(void);
 /* Private user code ---------------------------------------------------------*/
 /* USER CODE BEGIN 0 */
 uint16_t adc1_buffer[7];
-uint16_t adc2_buffer[7];  // data type specific to 16 bit integer with no sign ( vorzeichen ) 
+uint16_t adc2_buffer[7];  // data type specific to 16 bit integer with no sign ( vorzeichen )
 
 extern rx_status_frame rxstate;
 extern volatile uint8_t canmsg_received;
 
+uint32_t lastheartbeat;
 int inhibit_SDC;
 /* USER CODE END 0 */
 
@@ -101,7 +99,7 @@ int main(void)
   /* USER CODE BEGIN 1 */
 
   // Freeze WDG when debugging
-  __HAL_DBGMCU_FREEZE_IWDG();
+  //__HAL_DBGMCU_FREEZE_IWDG();
 
   /* USER CODE END 1 */
 
@@ -132,10 +130,9 @@ int main(void)
   MX_I2C1_Init();
   MX_USART1_UART_Init();
   MX_TIM6_Init();
-  //MX_IWDG_Init();
   /* USER CODE BEGIN 2 */
   // REMINDER: Comment out the IWDG Init above!!!
-  
+
   HAL_GPIO_WritePin(STATUS_LED1_GPIO_Port , STATUS_LED1_Pin , GPIO_PIN_SET);
   HAL_GPIO_WritePin(GSS_GPIO_GPIO_Port, GSS_GPIO_Pin, GPIO_PIN_SET);
 
@@ -150,27 +147,26 @@ int main(void)
   HAL_TIM_Base_Start(&htim3);
 
   // Prevent closing of SDC (esp. after WDG reset)
-  inhibit_SDC = 1;
+  //inhibit_SDC = 1;
 
   // Wait 1s to prevent bus error state while ABX is starting up
   // Wait 5s for the discharge of the DC link (so AMS can't restart)
-  HAL_Delay(5000);
+  //HAL_Delay(1000);
 
   // SDC can now be closed
   inhibit_SDC = 0;
   // PDU will reset if it doesn't receive a heartbeat every 120ms
-  MX_IWDG_Init();
+  //MX_IWDG_Init();
 
   /* USER CODE END 2 */
 
   /* Infinite loop */
   /* USER CODE BEGIN WHILE */
-while(1)
-{
+  while(1) {
     /* USER CODE END WHILE */
 
     /* USER CODE BEGIN 3 */
-    if (canmsg_received) { // USB zu CAN wandler , und dann CAN testen , validieren ob der code macht was es soll , red mit oskar/jasper 
+    if (canmsg_received) { // USB zu CAN wandler , und dann CAN testen , validieren ob der code macht was es soll , red mit oskar/jasper
       canmsg_received = 0;
       ChannelControl_UpdateGPIOs(rxstate.iostatus);
       ChannelControl_UpdatePWMs(
@@ -186,7 +182,16 @@ while(1)
       can_sendloop();
     }
 
-    currentMonitor_checklimits(); // ob irgnwo ueberstrom getreten ist 
+    // nominal WD time is 100ms, plus a bit of tolerance
+    // only trigger after 1s to allow for ABX bootup
+    if (((HAL_GetTick() - lastheartbeat) > 125U) && (HAL_GetTick() > 1000U)) {
+      // force open SDC, only resettable by power cycle
+      inhibit_SDC = 1;
+    }
+
+    HAL_GPIO_WritePin(STATUS_LED4_GPIO_Port , STATUS_LED4_Pin , inhibit_SDC);
+
+    currentMonitor_checklimits(); // ob irgnwo ueberstrom getreten ist
   }
   /* USER CODE END 3 */
 }
@@ -204,11 +209,10 @@ void SystemClock_Config(void)
   /** Initializes the RCC Oscillators according to the specified parameters
   * in the RCC_OscInitTypeDef structure.
   */
-  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI|RCC_OSCILLATORTYPE_HSE;
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
   RCC_OscInitStruct.HSEState = RCC_HSE_ON;
   RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
   RCC_OscInitStruct.HSIState = RCC_HSI_ON;
-  RCC_OscInitStruct.LSIState = RCC_LSI_ON;
   RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
   RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
   RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL4;
@@ -269,15 +273,15 @@ static void MX_ADC1_Init(void)
   hadc1.Instance = ADC1;
   hadc1.Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIV1;
   hadc1.Init.Resolution = ADC_RESOLUTION_12B;
-  hadc1.Init.ScanConvMode = ADC_SCAN_DISABLE;
+  hadc1.Init.ScanConvMode = ADC_SCAN_ENABLE;
   hadc1.Init.ContinuousConvMode = DISABLE;
   hadc1.Init.DiscontinuousConvMode = DISABLE;
-  hadc1.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
-  hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START;
+  hadc1.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_RISING;
+  hadc1.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T6_TRGO;
   hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT;
-  hadc1.Init.NbrOfConversion = 1;
+  hadc1.Init.NbrOfConversion = 8;
   hadc1.Init.DMAContinuousRequests = ENABLE;
-  hadc1.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
+  hadc1.Init.EOCSelection = ADC_EOC_SEQ_CONV;
   hadc1.Init.LowPowerAutoWait = DISABLE;
   hadc1.Init.Overrun = ADC_OVR_DATA_OVERWRITTEN;
   if (HAL_ADC_Init(&hadc1) != HAL_OK)
@@ -295,16 +299,79 @@ static void MX_ADC1_Init(void)
 
   /** Configure Regular Channel
   */
-  sConfig.Channel = ADC_CHANNEL_1;
+  sConfig.Channel = ADC_CHANNEL_2;
   sConfig.Rank = ADC_REGULAR_RANK_1;
   sConfig.SingleDiff = ADC_SINGLE_ENDED;
-  sConfig.SamplingTime = ADC_SAMPLETIME_1CYCLE_5;
+  sConfig.SamplingTime = ADC_SAMPLETIME_61CYCLES_5;
   sConfig.OffsetNumber = ADC_OFFSET_NONE;
   sConfig.Offset = 0;
   if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
   {
     Error_Handler();
   }
+
+  /** Configure Regular Channel
+  */
+  sConfig.Channel = ADC_CHANNEL_3;
+  sConfig.Rank = ADC_REGULAR_RANK_2;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+
+  /** Configure Regular Channel
+  */
+  sConfig.Channel = ADC_CHANNEL_4;
+  sConfig.Rank = ADC_REGULAR_RANK_3;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+
+  /** Configure Regular Channel
+  */
+  sConfig.Channel = ADC_CHANNEL_5;
+  sConfig.Rank = ADC_REGULAR_RANK_4;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+
+  /** Configure Regular Channel
+  */
+  sConfig.Channel = ADC_CHANNEL_6;
+  sConfig.Rank = ADC_REGULAR_RANK_5;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+
+  /** Configure Regular Channel
+  */
+  sConfig.Channel = ADC_CHANNEL_7;
+  sConfig.Rank = ADC_REGULAR_RANK_6;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+
+  /** Configure Regular Channel
+  */
+  sConfig.Channel = ADC_CHANNEL_8;
+  sConfig.Rank = ADC_REGULAR_RANK_7;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+
+  /** Configure Regular Channel
+  */
+  sConfig.Channel = ADC_CHANNEL_9;
+  sConfig.Rank = ADC_REGULAR_RANK_8;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
   /* USER CODE BEGIN ADC1_Init 2 */
 
   /* USER CODE END ADC1_Init 2 */
@@ -334,15 +401,15 @@ static void MX_ADC2_Init(void)
   hadc2.Instance = ADC2;
   hadc2.Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIV1;
   hadc2.Init.Resolution = ADC_RESOLUTION_12B;
-  hadc2.Init.ScanConvMode = ADC_SCAN_DISABLE;
+  hadc2.Init.ScanConvMode = ADC_SCAN_ENABLE;
   hadc2.Init.ContinuousConvMode = DISABLE;
   hadc2.Init.DiscontinuousConvMode = DISABLE;
-  hadc2.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
-  hadc2.Init.ExternalTrigConv = ADC_SOFTWARE_START;
+  hadc2.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_RISING;
+  hadc2.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T6_TRGO;
   hadc2.Init.DataAlign = ADC_DATAALIGN_RIGHT;
-  hadc2.Init.NbrOfConversion = 1;
+  hadc2.Init.NbrOfConversion = 5;
   hadc2.Init.DMAContinuousRequests = ENABLE;
-  hadc2.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
+  hadc2.Init.EOCSelection = ADC_EOC_SEQ_CONV;
   hadc2.Init.LowPowerAutoWait = DISABLE;
   hadc2.Init.Overrun = ADC_OVR_DATA_OVERWRITTEN;
   if (HAL_ADC_Init(&hadc2) != HAL_OK)
@@ -355,13 +422,49 @@ static void MX_ADC2_Init(void)
   sConfig.Channel = ADC_CHANNEL_1;
   sConfig.Rank = ADC_REGULAR_RANK_1;
   sConfig.SingleDiff = ADC_SINGLE_ENDED;
-  sConfig.SamplingTime = ADC_SAMPLETIME_1CYCLE_5;
+  sConfig.SamplingTime = ADC_SAMPLETIME_61CYCLES_5;
   sConfig.OffsetNumber = ADC_OFFSET_NONE;
   sConfig.Offset = 0;
   if (HAL_ADC_ConfigChannel(&hadc2, &sConfig) != HAL_OK)
   {
     Error_Handler();
   }
+
+  /** Configure Regular Channel
+  */
+  sConfig.Channel = ADC_CHANNEL_2;
+  sConfig.Rank = ADC_REGULAR_RANK_2;
+  if (HAL_ADC_ConfigChannel(&hadc2, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+
+  /** Configure Regular Channel
+  */
+  sConfig.Channel = ADC_CHANNEL_3;
+  sConfig.Rank = ADC_REGULAR_RANK_3;
+  if (HAL_ADC_ConfigChannel(&hadc2, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+
+  /** Configure Regular Channel
+  */
+  sConfig.Channel = ADC_CHANNEL_4;
+  sConfig.Rank = ADC_REGULAR_RANK_4;
+  if (HAL_ADC_ConfigChannel(&hadc2, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+
+  /** Configure Regular Channel
+  */
+  sConfig.Channel = ADC_CHANNEL_5;
+  sConfig.Rank = ADC_REGULAR_RANK_5;
+  if (HAL_ADC_ConfigChannel(&hadc2, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
   /* USER CODE BEGIN ADC2_Init 2 */
 
   /* USER CODE END ADC2_Init 2 */
@@ -453,35 +556,6 @@ static void MX_I2C1_Init(void)
 
 }
 
-/**
-  * @brief IWDG Initialization Function
-  * @param None
-  * @retval None
-  */
-static void MX_IWDG_Init(void)
-{
-
-  /* USER CODE BEGIN IWDG_Init 0 */
-
-  /* USER CODE END IWDG_Init 0 */
-
-  /* USER CODE BEGIN IWDG_Init 1 */
-
-  /* USER CODE END IWDG_Init 1 */
-  hiwdg.Instance = IWDG;
-  hiwdg.Init.Prescaler = IWDG_PRESCALER_4;
-  hiwdg.Init.Window = 1000;
-  hiwdg.Init.Reload = 1000;
-  if (HAL_IWDG_Init(&hiwdg) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  /* USER CODE BEGIN IWDG_Init 2 */
-
-  /* USER CODE END IWDG_Init 2 */
-
-}
-
 /**
   * @brief TIM2 Initialization Function
   * @param None
@@ -698,6 +772,9 @@ static void MX_GPIO_Init(void)
   __HAL_RCC_GPIOA_CLK_ENABLE();
   __HAL_RCC_GPIOB_CLK_ENABLE();
 
+  /*Configure GPIO pin Output Level */
+  HAL_GPIO_WritePin(DSEL_8_GPIO_Port, DSEL_8_Pin, GPIO_PIN_RESET);
+
   /*Configure GPIO pin Output Level */
   HAL_GPIO_WritePin(GPIOB, GSS_GPIO_Pin|DSEL_3_Pin|DSEL_4_Pin|DSEL_5_Pin
                           |DSEL_6_Pin|DSEL_7_Pin, GPIO_PIN_RESET);
@@ -705,6 +782,13 @@ static void MX_GPIO_Init(void)
   /*Configure GPIO pin Output Level */
   HAL_GPIO_WritePin(GPIOC, STATUS_LED1_Pin|STATUS_LED2_Pin|STATUS_LED3_Pin|STATUS_LED4_Pin, GPIO_PIN_RESET);
 
+  /*Configure GPIO pin : DSEL_8_Pin */
+  GPIO_InitStruct.Pin = DSEL_8_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+  HAL_GPIO_Init(DSEL_8_GPIO_Port, &GPIO_InitStruct);
+
   /*Configure GPIO pins : GSS_GPIO_Pin DSEL_3_Pin DSEL_4_Pin DSEL_5_Pin
                            DSEL_6_Pin DSEL_7_Pin */
   GPIO_InitStruct.Pin = GSS_GPIO_Pin|DSEL_3_Pin|DSEL_4_Pin|DSEL_5_Pin
diff --git a/Core/Src/stm32f3xx_hal_msp.c b/Core/Src/stm32f3xx_hal_msp.c
index 8eaa079..dfa2b97 100644
--- a/Core/Src/stm32f3xx_hal_msp.c
+++ b/Core/Src/stm32f3xx_hal_msp.c
@@ -106,26 +106,32 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
 
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOA_CLK_ENABLE();
+    __HAL_RCC_GPIOF_CLK_ENABLE();
     /**ADC1 GPIO Configuration
     PC0     ------> ADC1_IN6
     PC1     ------> ADC1_IN7
     PC2     ------> ADC1_IN8
     PC3     ------> ADC1_IN9
-    PA0     ------> ADC1_IN1
     PA1     ------> ADC1_IN2
     PA2     ------> ADC1_IN3
     PA3     ------> ADC1_IN4
+    PF4     ------> ADC1_IN5
     */
     GPIO_InitStruct.Pin = isense12_Pin|isense11_Pin|isense6_Pin|isense13_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
     GPIO_InitStruct.Pull = GPIO_NOPULL;
     HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
 
-    GPIO_InitStruct.Pin = DSEL_8_Pin|isense5_Pin|isense3_Pin|isense7_Pin;
+    GPIO_InitStruct.Pin = isense5_Pin|isense3_Pin|isense7_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
     GPIO_InitStruct.Pull = GPIO_NOPULL;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
 
+    GPIO_InitStruct.Pin = isense9_Pin;
+    GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    HAL_GPIO_Init(isense9_GPIO_Port, &GPIO_InitStruct);
+
     /* ADC1 DMA Init */
     /* ADC1 Init */
     hdma_adc1.Instance = DMA1_Channel1;
@@ -143,6 +149,9 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
 
     __HAL_LINKDMA(hadc,DMA_Handle,hdma_adc1);
 
+    /* ADC1 interrupt Init */
+    HAL_NVIC_SetPriority(ADC1_2_IRQn, 0, 0);
+    HAL_NVIC_EnableIRQ(ADC1_2_IRQn);
   /* USER CODE BEGIN ADC1_MspInit 1 */
 
   /* USER CODE END ADC1_MspInit 1 */
@@ -172,10 +181,10 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
     GPIO_InitStruct.Pull = GPIO_NOPULL;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
 
-    GPIO_InitStruct.Pin = GPIO_PIN_4;
+    GPIO_InitStruct.Pin = LV_sens_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
     GPIO_InitStruct.Pull = GPIO_NOPULL;
-    HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+    HAL_GPIO_Init(LV_sens_GPIO_Port, &GPIO_InitStruct);
 
     /* ADC2 DMA Init */
     /* ADC2 Init */
@@ -194,6 +203,9 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
 
     __HAL_LINKDMA(hadc,DMA_Handle,hdma_adc2);
 
+    /* ADC2 interrupt Init */
+    HAL_NVIC_SetPriority(ADC1_2_IRQn, 0, 0);
+    HAL_NVIC_EnableIRQ(ADC1_2_IRQn);
   /* USER CODE BEGIN ADC2_MspInit 1 */
 
   /* USER CODE END ADC2_MspInit 1 */
@@ -225,17 +237,29 @@ void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
     PC1     ------> ADC1_IN7
     PC2     ------> ADC1_IN8
     PC3     ------> ADC1_IN9
-    PA0     ------> ADC1_IN1
     PA1     ------> ADC1_IN2
     PA2     ------> ADC1_IN3
     PA3     ------> ADC1_IN4
+    PF4     ------> ADC1_IN5
     */
     HAL_GPIO_DeInit(GPIOC, isense12_Pin|isense11_Pin|isense6_Pin|isense13_Pin);
 
-    HAL_GPIO_DeInit(GPIOA, DSEL_8_Pin|isense5_Pin|isense3_Pin|isense7_Pin);
+    HAL_GPIO_DeInit(GPIOA, isense5_Pin|isense3_Pin|isense7_Pin);
+
+    HAL_GPIO_DeInit(isense9_GPIO_Port, isense9_Pin);
 
     /* ADC1 DMA DeInit */
     HAL_DMA_DeInit(hadc->DMA_Handle);
+
+    /* ADC1 interrupt DeInit */
+  /* USER CODE BEGIN ADC1:ADC1_2_IRQn disable */
+    /**
+    * Uncomment the line below to disable the "ADC1_2_IRQn" interrupt
+    * Be aware, disabling shared interrupt may affect other IPs
+    */
+    /* HAL_NVIC_DisableIRQ(ADC1_2_IRQn); */
+  /* USER CODE END ADC1:ADC1_2_IRQn disable */
+
   /* USER CODE BEGIN ADC1_MspDeInit 1 */
 
   /* USER CODE END ADC1_MspDeInit 1 */
@@ -260,10 +284,20 @@ void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
     */
     HAL_GPIO_DeInit(GPIOA, isense2_Pin|isense1_Pin|isense10_Pin|isense4_Pin);
 
-    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_4);
+    HAL_GPIO_DeInit(LV_sens_GPIO_Port, LV_sens_Pin);
 
     /* ADC2 DMA DeInit */
     HAL_DMA_DeInit(hadc->DMA_Handle);
+
+    /* ADC2 interrupt DeInit */
+  /* USER CODE BEGIN ADC2:ADC1_2_IRQn disable */
+    /**
+    * Uncomment the line below to disable the "ADC1_2_IRQn" interrupt
+    * Be aware, disabling shared interrupt may affect other IPs
+    */
+    /* HAL_NVIC_DisableIRQ(ADC1_2_IRQn); */
+  /* USER CODE END ADC2:ADC1_2_IRQn disable */
+
   /* USER CODE BEGIN ADC2_MspDeInit 1 */
 
   /* USER CODE END ADC2_MspDeInit 1 */
@@ -477,6 +511,9 @@ void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base)
   /* USER CODE END TIM6_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_TIM6_CLK_ENABLE();
+    /* TIM6 interrupt Init */
+    HAL_NVIC_SetPriority(TIM6_DAC_IRQn, 0, 0);
+    HAL_NVIC_EnableIRQ(TIM6_DAC_IRQn);
   /* USER CODE BEGIN TIM6_MspInit 1 */
 
   /* USER CODE END TIM6_MspInit 1 */
@@ -580,6 +617,9 @@ void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* htim_base)
   /* USER CODE END TIM6_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_TIM6_CLK_DISABLE();
+
+    /* TIM6 interrupt DeInit */
+    HAL_NVIC_DisableIRQ(TIM6_DAC_IRQn);
   /* USER CODE BEGIN TIM6_MspDeInit 1 */
 
   /* USER CODE END TIM6_MspDeInit 1 */
diff --git a/Core/Src/stm32f3xx_it.c b/Core/Src/stm32f3xx_it.c
index 33b8c1a..b6fe145 100644
--- a/Core/Src/stm32f3xx_it.c
+++ b/Core/Src/stm32f3xx_it.c
@@ -57,7 +57,10 @@
 /* External variables --------------------------------------------------------*/
 extern DMA_HandleTypeDef hdma_adc1;
 extern DMA_HandleTypeDef hdma_adc2;
+extern ADC_HandleTypeDef hadc1;
+extern ADC_HandleTypeDef hadc2;
 extern CAN_HandleTypeDef hcan;
+extern TIM_HandleTypeDef htim6;
 /* USER CODE BEGIN EV */
 
 /* USER CODE END EV */
@@ -215,6 +218,21 @@ void DMA1_Channel1_IRQHandler(void)
   /* USER CODE END DMA1_Channel1_IRQn 1 */
 }
 
+/**
+  * @brief This function handles ADC1 and ADC2 interrupts.
+  */
+void ADC1_2_IRQHandler(void)
+{
+  /* USER CODE BEGIN ADC1_2_IRQn 0 */
+
+  /* USER CODE END ADC1_2_IRQn 0 */
+  HAL_ADC_IRQHandler(&hadc1);
+  HAL_ADC_IRQHandler(&hadc2);
+  /* USER CODE BEGIN ADC1_2_IRQn 1 */
+
+  /* USER CODE END ADC1_2_IRQn 1 */
+}
+
 /**
   * @brief This function handles USB low priority or CAN_RX0 interrupts.
   */
@@ -257,6 +275,20 @@ void CAN_SCE_IRQHandler(void)
   /* USER CODE END CAN_SCE_IRQn 1 */
 }
 
+/**
+  * @brief This function handles Timer 6 interrupt and DAC underrun interrupts.
+  */
+void TIM6_DAC_IRQHandler(void)
+{
+  /* USER CODE BEGIN TIM6_DAC_IRQn 0 */
+
+  /* USER CODE END TIM6_DAC_IRQn 0 */
+  HAL_TIM_IRQHandler(&htim6);
+  /* USER CODE BEGIN TIM6_DAC_IRQn 1 */
+
+  /* USER CODE END TIM6_DAC_IRQn 1 */
+}
+
 /**
   * @brief This function handles DMA2 channel1 global interrupt.
   */
diff --git a/PDU FT24 MCU.ioc b/PDU FT24 MCU.ioc
index 8478272..9a7f05c 100644
--- a/PDU FT24 MCU.ioc	
+++ b/PDU FT24 MCU.ioc	
@@ -1,24 +1,91 @@
 #MicroXplorer Configuration settings - do not modify
-ADC1.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_1
+ADC1.Channel-11\#ChannelRegularConversion=ADC_CHANNEL_2
+ADC1.Channel-12\#ChannelRegularConversion=ADC_CHANNEL_3
+ADC1.Channel-13\#ChannelRegularConversion=ADC_CHANNEL_4
+ADC1.Channel-14\#ChannelRegularConversion=ADC_CHANNEL_5
+ADC1.Channel-15\#ChannelRegularConversion=ADC_CHANNEL_6
+ADC1.Channel-16\#ChannelRegularConversion=ADC_CHANNEL_7
+ADC1.Channel-17\#ChannelRegularConversion=ADC_CHANNEL_8
+ADC1.Channel-18\#ChannelRegularConversion=ADC_CHANNEL_9
 ADC1.DMAContinuousRequests=ENABLE
-ADC1.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,OffsetNumber-0\#ChannelRegularConversion,Offset-0\#ChannelRegularConversion,NbrOfConversionFlag,master,DMAContinuousRequests,NbrOfConversion
-ADC1.NbrOfConversion=1
+ADC1.EOCSelection=ADC_EOC_SEQ_CONV
+ADC1.EnableRegularConversion=ENABLE
+ADC1.ExternalTrigConv=ADC_EXTERNALTRIGCONV_T6_TRGO
+ADC1.IPParameters=DMAContinuousRequests,EOCSelection,EnableRegularConversion,Rank-11\#ChannelRegularConversion,Channel-11\#ChannelRegularConversion,SamplingTime-11\#ChannelRegularConversion,OffsetNumber-11\#ChannelRegularConversion,Offset-11\#ChannelRegularConversion,NbrOfConversionFlag,Rank-12\#ChannelRegularConversion,Channel-12\#ChannelRegularConversion,SamplingTime-12\#ChannelRegularConversion,OffsetNumber-12\#ChannelRegularConversion,Offset-12\#ChannelRegularConversion,Rank-13\#ChannelRegularConversion,Channel-13\#ChannelRegularConversion,SamplingTime-13\#ChannelRegularConversion,OffsetNumber-13\#ChannelRegularConversion,Offset-13\#ChannelRegularConversion,Rank-14\#ChannelRegularConversion,Channel-14\#ChannelRegularConversion,SamplingTime-14\#ChannelRegularConversion,OffsetNumber-14\#ChannelRegularConversion,Offset-14\#ChannelRegularConversion,Rank-15\#ChannelRegularConversion,Channel-15\#ChannelRegularConversion,SamplingTime-15\#ChannelRegularConversion,OffsetNumber-15\#ChannelRegularConversion,Offset-15\#ChannelRegularConversion,Rank-16\#ChannelRegularConversion,Channel-16\#ChannelRegularConversion,SamplingTime-16\#ChannelRegularConversion,OffsetNumber-16\#ChannelRegularConversion,Offset-16\#ChannelRegularConversion,Rank-17\#ChannelRegularConversion,Channel-17\#ChannelRegularConversion,SamplingTime-17\#ChannelRegularConversion,OffsetNumber-17\#ChannelRegularConversion,Offset-17\#ChannelRegularConversion,NbrOfConversion,ExternalTrigConv,master,Rank-18\#ChannelRegularConversion,Channel-18\#ChannelRegularConversion,SamplingTime-18\#ChannelRegularConversion,SamplingTimeOPAMP-18\#ChannelRegularConversion,OffsetNumber-18\#ChannelRegularConversion,Offset-18\#ChannelRegularConversion
+ADC1.NbrOfConversion=8
 ADC1.NbrOfConversionFlag=1
-ADC1.Offset-0\#ChannelRegularConversion=0
-ADC1.OffsetNumber-0\#ChannelRegularConversion=ADC_OFFSET_NONE
-ADC1.Rank-0\#ChannelRegularConversion=1
-ADC1.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC1.Offset-11\#ChannelRegularConversion=0
+ADC1.Offset-12\#ChannelRegularConversion=0
+ADC1.Offset-13\#ChannelRegularConversion=0
+ADC1.Offset-14\#ChannelRegularConversion=0
+ADC1.Offset-15\#ChannelRegularConversion=0
+ADC1.Offset-16\#ChannelRegularConversion=0
+ADC1.Offset-17\#ChannelRegularConversion=0
+ADC1.Offset-18\#ChannelRegularConversion=0
+ADC1.OffsetNumber-11\#ChannelRegularConversion=ADC_OFFSET_NONE
+ADC1.OffsetNumber-12\#ChannelRegularConversion=ADC_OFFSET_NONE
+ADC1.OffsetNumber-13\#ChannelRegularConversion=ADC_OFFSET_NONE
+ADC1.OffsetNumber-14\#ChannelRegularConversion=ADC_OFFSET_NONE
+ADC1.OffsetNumber-15\#ChannelRegularConversion=ADC_OFFSET_NONE
+ADC1.OffsetNumber-16\#ChannelRegularConversion=ADC_OFFSET_NONE
+ADC1.OffsetNumber-17\#ChannelRegularConversion=ADC_OFFSET_NONE
+ADC1.OffsetNumber-18\#ChannelRegularConversion=ADC_OFFSET_NONE
+ADC1.Rank-11\#ChannelRegularConversion=1
+ADC1.Rank-12\#ChannelRegularConversion=2
+ADC1.Rank-13\#ChannelRegularConversion=3
+ADC1.Rank-14\#ChannelRegularConversion=4
+ADC1.Rank-15\#ChannelRegularConversion=5
+ADC1.Rank-16\#ChannelRegularConversion=6
+ADC1.Rank-17\#ChannelRegularConversion=7
+ADC1.Rank-18\#ChannelRegularConversion=8
+ADC1.SamplingTime-11\#ChannelRegularConversion=ADC_SAMPLETIME_61CYCLES_5
+ADC1.SamplingTime-12\#ChannelRegularConversion=ADC_SAMPLETIME_61CYCLES_5
+ADC1.SamplingTime-13\#ChannelRegularConversion=ADC_SAMPLETIME_61CYCLES_5
+ADC1.SamplingTime-14\#ChannelRegularConversion=ADC_SAMPLETIME_61CYCLES_5
+ADC1.SamplingTime-15\#ChannelRegularConversion=ADC_SAMPLETIME_61CYCLES_5
+ADC1.SamplingTime-16\#ChannelRegularConversion=ADC_SAMPLETIME_61CYCLES_5
+ADC1.SamplingTime-17\#ChannelRegularConversion=ADC_SAMPLETIME_61CYCLES_5
+ADC1.SamplingTime-18\#ChannelRegularConversion=ADC_SAMPLETIME_61CYCLES_5
+ADC1.SamplingTimeOPAMP-18\#ChannelRegularConversion=ADC_SAMPLETIME_61CYCLES_5
 ADC1.master=1
 ADC2.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_1
+ADC2.Channel-1\#ChannelRegularConversion=ADC_CHANNEL_2
+ADC2.Channel-2\#ChannelRegularConversion=ADC_CHANNEL_3
+ADC2.Channel-3\#ChannelRegularConversion=ADC_CHANNEL_4
+ADC2.Channel-4\#ChannelRegularConversion=ADC_CHANNEL_5
 ADC2.ClockPrescaler=ADC_CLOCK_ASYNC_DIV1
 ADC2.DMAContinuousRequests=ENABLE
-ADC2.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,OffsetNumber-0\#ChannelRegularConversion,Offset-0\#ChannelRegularConversion,NbrOfConversionFlag,ClockPrescaler,LowPowerAutoWait,DMAContinuousRequests
+ADC2.EOCSelection=ADC_EOC_SEQ_CONV
+ADC2.EnableInjectedConversion=DISABLE
+ADC2.ExternalTrigConv=ADC_EXTERNALTRIGCONV_T6_TRGO
+ADC2.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,OffsetNumber-0\#ChannelRegularConversion,Offset-0\#ChannelRegularConversion,NbrOfConversionFlag,ClockPrescaler,LowPowerAutoWait,DMAContinuousRequests,EOCSelection,NbrOfConversion,Rank-1\#ChannelRegularConversion,Channel-1\#ChannelRegularConversion,SamplingTime-1\#ChannelRegularConversion,SamplingTimeOPAMP-1\#ChannelRegularConversion,OffsetNumber-1\#ChannelRegularConversion,Offset-1\#ChannelRegularConversion,Rank-2\#ChannelRegularConversion,Channel-2\#ChannelRegularConversion,SamplingTime-2\#ChannelRegularConversion,SamplingTimeOPAMP-2\#ChannelRegularConversion,OffsetNumber-2\#ChannelRegularConversion,Offset-2\#ChannelRegularConversion,Rank-3\#ChannelRegularConversion,Channel-3\#ChannelRegularConversion,SamplingTime-3\#ChannelRegularConversion,SamplingTimeOPAMP-3\#ChannelRegularConversion,OffsetNumber-3\#ChannelRegularConversion,Offset-3\#ChannelRegularConversion,Rank-4\#ChannelRegularConversion,Channel-4\#ChannelRegularConversion,SamplingTime-4\#ChannelRegularConversion,SamplingTimeOPAMP-4\#ChannelRegularConversion,OffsetNumber-4\#ChannelRegularConversion,Offset-4\#ChannelRegularConversion,ExternalTrigConv,EnableInjectedConversion
 ADC2.LowPowerAutoWait=DISABLE
+ADC2.NbrOfConversion=5
 ADC2.NbrOfConversionFlag=1
 ADC2.Offset-0\#ChannelRegularConversion=0
+ADC2.Offset-1\#ChannelRegularConversion=0
+ADC2.Offset-2\#ChannelRegularConversion=0
+ADC2.Offset-3\#ChannelRegularConversion=0
+ADC2.Offset-4\#ChannelRegularConversion=0
 ADC2.OffsetNumber-0\#ChannelRegularConversion=ADC_OFFSET_NONE
+ADC2.OffsetNumber-1\#ChannelRegularConversion=ADC_OFFSET_NONE
+ADC2.OffsetNumber-2\#ChannelRegularConversion=ADC_OFFSET_NONE
+ADC2.OffsetNumber-3\#ChannelRegularConversion=ADC_OFFSET_NONE
+ADC2.OffsetNumber-4\#ChannelRegularConversion=ADC_OFFSET_NONE
 ADC2.Rank-0\#ChannelRegularConversion=1
-ADC2.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC2.Rank-1\#ChannelRegularConversion=2
+ADC2.Rank-2\#ChannelRegularConversion=3
+ADC2.Rank-3\#ChannelRegularConversion=4
+ADC2.Rank-4\#ChannelRegularConversion=5
+ADC2.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_61CYCLES_5
+ADC2.SamplingTime-1\#ChannelRegularConversion=ADC_SAMPLETIME_61CYCLES_5
+ADC2.SamplingTime-2\#ChannelRegularConversion=ADC_SAMPLETIME_61CYCLES_5
+ADC2.SamplingTime-3\#ChannelRegularConversion=ADC_SAMPLETIME_61CYCLES_5
+ADC2.SamplingTime-4\#ChannelRegularConversion=ADC_SAMPLETIME_61CYCLES_5
+ADC2.SamplingTimeOPAMP-1\#ChannelRegularConversion=ADC_SAMPLETIME_61CYCLES_5
+ADC2.SamplingTimeOPAMP-2\#ChannelRegularConversion=ADC_SAMPLETIME_61CYCLES_5
+ADC2.SamplingTimeOPAMP-3\#ChannelRegularConversion=ADC_SAMPLETIME_61CYCLES_5
+ADC2.SamplingTimeOPAMP-4\#ChannelRegularConversion=ADC_SAMPLETIME_61CYCLES_5
 CAD.formats=
 CAD.pinconfig=
 CAD.provider=
@@ -56,61 +123,56 @@ File.Version=6
 GPIO.groupedBy=Group By Peripherals
 I2C1.IPParameters=Timing
 I2C1.Timing=0x00303D5B
-IWDG.IPParameters=Prescaler,Window,Reload
-IWDG.Prescaler=IWDG_PRESCALER_4
-IWDG.Reload=1000
-IWDG.Window=1000
 KeepUserPlacement=false
 Mcu.CPN=STM32F302RBT6
 Mcu.Family=STM32F3
 Mcu.IP0=ADC1
 Mcu.IP1=ADC2
-Mcu.IP10=TIM3
-Mcu.IP11=TIM6
-Mcu.IP12=USART1
+Mcu.IP10=TIM6
+Mcu.IP11=USART1
 Mcu.IP2=CAN
 Mcu.IP3=DMA
 Mcu.IP4=I2C1
-Mcu.IP5=IWDG
-Mcu.IP6=NVIC
-Mcu.IP7=RCC
-Mcu.IP8=SYS
-Mcu.IP9=TIM2
-Mcu.IPNb=13
+Mcu.IP5=NVIC
+Mcu.IP6=RCC
+Mcu.IP7=SYS
+Mcu.IP8=TIM2
+Mcu.IP9=TIM3
+Mcu.IPNb=12
 Mcu.Name=STM32F302R(B-C)Tx
 Mcu.Package=LQFP64
 Mcu.Pin0=PF0-OSC_IN
 Mcu.Pin1=PF1-OSC_OUT
-Mcu.Pin10=PA4
-Mcu.Pin11=PA5
-Mcu.Pin12=PA6
-Mcu.Pin13=PA7
-Mcu.Pin14=PC4
-Mcu.Pin15=PB0
-Mcu.Pin16=PB1
-Mcu.Pin17=PB10
-Mcu.Pin18=PB12
-Mcu.Pin19=PB13
+Mcu.Pin10=PF4
+Mcu.Pin11=PA4
+Mcu.Pin12=PA5
+Mcu.Pin13=PA6
+Mcu.Pin14=PA7
+Mcu.Pin15=PC4
+Mcu.Pin16=PB0
+Mcu.Pin17=PB1
+Mcu.Pin18=PB10
+Mcu.Pin19=PB12
 Mcu.Pin2=PC0
-Mcu.Pin20=PB14
-Mcu.Pin21=PB15
-Mcu.Pin22=PC6
-Mcu.Pin23=PC7
-Mcu.Pin24=PC8
-Mcu.Pin25=PC9
-Mcu.Pin26=PA9
-Mcu.Pin27=PA10
-Mcu.Pin28=PA11
-Mcu.Pin29=PA12
+Mcu.Pin20=PB13
+Mcu.Pin21=PB14
+Mcu.Pin22=PB15
+Mcu.Pin23=PC6
+Mcu.Pin24=PC7
+Mcu.Pin25=PC8
+Mcu.Pin26=PC9
+Mcu.Pin27=PA9
+Mcu.Pin28=PA10
+Mcu.Pin29=PA11
 Mcu.Pin3=PC1
-Mcu.Pin30=PA13
-Mcu.Pin31=PA14
-Mcu.Pin32=PA15
-Mcu.Pin33=PB3
-Mcu.Pin34=PB4
-Mcu.Pin35=PB7
-Mcu.Pin36=PB9
-Mcu.Pin37=VP_IWDG_VS_IWDG
+Mcu.Pin30=PA12
+Mcu.Pin31=PA13
+Mcu.Pin32=PA14
+Mcu.Pin33=PA15
+Mcu.Pin34=PB3
+Mcu.Pin35=PB4
+Mcu.Pin36=PB7
+Mcu.Pin37=PB9
 Mcu.Pin38=VP_SYS_VS_Systick
 Mcu.Pin39=VP_TIM6_VS_ClockSourceINT
 Mcu.Pin4=PC2
@@ -125,6 +187,7 @@ Mcu.UserConstants=
 Mcu.UserName=STM32F302RBTx
 MxCube.Version=6.11.1
 MxDb.Version=DB.6.0.111
+NVIC.ADC1_2_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
 NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
 NVIC.CAN_RX1_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
 NVIC.CAN_SCE_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
@@ -139,13 +202,13 @@ NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
 NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
 NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
 NVIC.SysTick_IRQn=true\:15\:0\:false\:false\:true\:false\:true\:false
+NVIC.TIM6_DAC_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
 NVIC.USB_LP_CAN_RX0_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
 NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
 PA0.GPIOParameters=GPIO_Label
 PA0.GPIO_Label=DSEL 8
 PA0.Locked=true
-PA0.Mode=IN1-Single-Ended
-PA0.Signal=ADC1_IN1
+PA0.Signal=GPIO_Output
 PA1.GPIOParameters=GPIO_Label
 PA1.GPIO_Label=isense5
 PA1.Locked=true
@@ -256,6 +319,8 @@ PC2.Signal=ADCx_IN8
 PC3.GPIOParameters=GPIO_Label
 PC3.GPIO_Label=isense13
 PC3.Signal=ADCx_IN9
+PC4.GPIOParameters=GPIO_Label
+PC4.GPIO_Label=LV_sens
 PC4.Locked=true
 PC4.Mode=IN5-Single-Ended
 PC4.Signal=ADC2_IN5
@@ -281,6 +346,11 @@ PF0-OSC_IN.Signal=RCC_OSC_IN
 PF1-OSC_OUT.Locked=true
 PF1-OSC_OUT.Mode=HSE-External-Oscillator
 PF1-OSC_OUT.Signal=RCC_OSC_OUT
+PF4.GPIOParameters=GPIO_Label
+PF4.GPIO_Label=isense9
+PF4.Locked=true
+PF4.Mode=IN5-Single-Ended
+PF4.Signal=ADC1_IN5
 PinOutPanel.RotationAngle=0
 ProjectManager.AskForMigrate=true
 ProjectManager.BackupPrevious=false
@@ -377,15 +447,13 @@ TIM2.Period=65535
 TIM2.Pulse-PWM\ Generation2\ CH2=0
 TIM3.Channel-PWM\ Generation1\ CH1=TIM_CHANNEL_1
 TIM3.Channel-PWM\ Generation4\ CH4=TIM_CHANNEL_4
-TIM3.IPParameters=Channel-PWM Generation4 CH4,Channel-PWM Generation1 CH1
+TIM3.IPParameters=Channel-PWM Generation1 CH1,Channel-PWM Generation4 CH4
 TIM6.IPParameters=Prescaler,Period,TIM_MasterOutputTrigger
 TIM6.Period=8000-1
 TIM6.Prescaler=400
 TIM6.TIM_MasterOutputTrigger=TIM_TRGO_UPDATE
 USART1.IPParameters=VirtualMode-Multiprocessor_communication
 USART1.VirtualMode-Multiprocessor_communication=VM_ASYNC
-VP_IWDG_VS_IWDG.Mode=IWDG_Activate
-VP_IWDG_VS_IWDG.Signal=IWDG_VS_IWDG
 VP_SYS_VS_Systick.Mode=SysTick
 VP_SYS_VS_Systick.Signal=SYS_VS_Systick
 VP_TIM6_VS_ClockSourceINT.Mode=Enable_Timer
diff --git a/STM32Make.make b/STM32Make.make
index 6bae07d..70a67fe 100644
--- a/STM32Make.make
+++ b/STM32Make.make
@@ -59,7 +59,6 @@ Drivers/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_flash_ex.c \
 Drivers/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_gpio.c \
 Drivers/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_i2c.c \
 Drivers/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_i2c_ex.c \
-Drivers/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_iwdg.c \
 Drivers/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_pwr.c \
 Drivers/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_pwr_ex.c \
 Drivers/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_rcc.c \
@@ -86,7 +85,7 @@ PREFIX = arm-none-eabi-
 POSTFIX = "
 # The gcc compiler bin path can be either defined in make command via GCC_PATH variable (> make GCC_PATH=xxx)
 # either it can be added to the PATH environment variable.
-GCC_PATH="c:/Users/nived/AppData/Roaming/Code/User/globalStorage/bmd.stm32-for-vscode/@xpack-dev-tools/arm-none-eabi-gcc/12.3.1-1.2.1/.content/bin
+GCC_PATH="c:/Users/GETAC/AppData/Roaming/Code/User/globalStorage/bmd.stm32-for-vscode/@xpack-dev-tools/arm-none-eabi-gcc/13.2.1-1.1.1/.content/bin
 ifdef GCC_PATH
 CXX = $(GCC_PATH)/$(PREFIX)g++$(POSTFIX)
 CC = $(GCC_PATH)/$(PREFIX)gcc$(POSTFIX)
@@ -239,13 +238,13 @@ $(BUILD_DIR):
 # flash
 #######################################
 flash: $(BUILD_DIR)/$(TARGET).elf
-	"C:/USERS/NIVED/APPDATA/ROAMING/CODE/USER/GLOBALSTORAGE/BMD.STM32-FOR-VSCODE/@XPACK-DEV-TOOLS/OPENOCD/0.12.0-2.1/.CONTENT/BIN/OPENOCD.EXE" -f ./openocd.cfg -c "program $(BUILD_DIR)/$(TARGET).elf verify reset exit"
+	"C:/USERS/GETAC/APPDATA/ROAMING/CODE/USER/GLOBALSTORAGE/BMD.STM32-FOR-VSCODE/@XPACK-DEV-TOOLS/OPENOCD/0.12.0-3.1/.CONTENT/BIN/OPENOCD.EXE" -f ./openocd.cfg -c "program $(BUILD_DIR)/$(TARGET).elf verify reset exit"
 
 #######################################
 # erase
 #######################################
 erase: $(BUILD_DIR)/$(TARGET).elf
-	"C:/USERS/NIVED/APPDATA/ROAMING/CODE/USER/GLOBALSTORAGE/BMD.STM32-FOR-VSCODE/@XPACK-DEV-TOOLS/OPENOCD/0.12.0-2.1/.CONTENT/BIN/OPENOCD.EXE" -f ./openocd.cfg -c "init; reset halt; stm32f3x mass_erase 0; exit"
+	"C:/USERS/GETAC/APPDATA/ROAMING/CODE/USER/GLOBALSTORAGE/BMD.STM32-FOR-VSCODE/@XPACK-DEV-TOOLS/OPENOCD/0.12.0-3.1/.CONTENT/BIN/OPENOCD.EXE" -f ./openocd.cfg -c "init; reset halt; stm32f3x mass_erase 0; exit"
 
 #######################################
 # clean up