2024-06-15 01:36:01 +02:00
|
|
|
V0.7.1
|
|
|
|
|
MVBMS:
|
|
|
|
|
- new outline
|
|
|
|
|
- removed UART
|
|
|
|
|
- added resistance to DNP resistors for V_{ref}
|
|
|
|
|
- LEDs are controlled by PWM
|
|
|
|
|
- added PWM for inverters with PWM_INV_COOLING
|
|
|
|
|
- added many testpoints
|
|
|
|
|
|
|
|
|
|
V0.7.2
|
|
|
|
|
MV_Abnehmerplatine:
|
|
|
|
|
- new outline
|
|
|
|
|
- added a second GND and 3V3 pin to the connector
|
|
|
|
|
- made sure the pin layout of the connector is equivalent to the one on the MVBMS
|
|
|
|
|
- kept the 14 tmp1075 sensors
|
|
|
|
|
- finished the layout of the MV-Abnehmerplatine
|
|
|
|
|
|
|
|
|
|
V0.7.3
|
|
|
|
|
MV_Abnehmerplatine:
|
|
|
|
|
- rechecked the distance between the traces leading to the battery cells and moved them around accordingly
|
|
|
|
|
|
|
|
|
|
MVBMS:
|
|
|
|
|
- moved RGB LED pins to TIM4 from TIM3
|
|
|
|
|
- moved PWM_BAT_COOLING to TIM3CH3
|
|
|
|
|
- moved PWM_INV_COOLING to TIM15CH1
|
|
|
|
|
- moved 60V_ENABLE to TIM2CH1
|
|
|
|
|
- PMEG3015EJ for the CURRENT_MEASUREMENT to prevent reverse voltage
|
2024-06-16 20:34:17 +02:00
|
|
|
- add an extra connector for the cooling fans that cool the ESCs/inverters
|
2024-06-19 22:32:00 +02:00
|
|
|
- fixed some traces and some zones
|
|
|
|
|
|
|
|
|
|
V0.7.4
|
|
|
|
|
- added more documentation
|
|
|
|
|
|
|
|
|
|
MV_Abnehmerplatine:
|
|
|
|
|
- aligned the connectors to the MVBMS connector
|
|
|
|
|
- slight changes to the outline for the connector
|
|
|
|
|
- fixed some zones
|
|
|
|
|
|
|
|
|
|
MVBMS
|
2024-06-22 01:47:27 +02:00
|
|
|
- new outline
|
|
|
|
|
|
|
|
|
|
V0.8.1
|
|
|
|
|
new outlines for the MVBMS and Abnehmerplatine
|
|
|
|
|
added more photos under documentation
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MV_Abnehmerplatin:
|
|
|
|
|
- the right side of the PCB is now smaller
|
|
|
|
|
|
|
|
|
|
MVBMS:
|
|
|
|
|
- added a 1MBit I2C EEPROM to save data of the battery#
|
|
|
|
|
- combined everything that goes to the ESC into one connector
|
|
|
|
|
- both battery cooling fans are now on one connector
|
|
|
|
|
- ESC cooling and battery cooling fans can be controlled pwm or voltage controlled
|
|
|
|
|
- PRECHARGE and RELAY connectors are now one connector
|
|
|
|
|
|
|
|
|
|
- renamed PWM_BAT_COOLING to BAT_COOING_PWM
|
|
|
|
|
- renamed 60V_ENABLE to BAT_COOING_ENABLE
|
|
|
|
|
- renamed PWM_PG_Fan_1/2 to ESC1/2_PWM
|
|
|
|
|
- renamed PWM_INV_COOLING to ESC_COOLING_PWM
|
|
|
|
|
- added ESC_COOLING_ENABLE for voltage contol of the ESC cooling fans
|
|
|
|
|
- connected V_{ref} to GPIO 2 of the ADBMS. With this, it can be detected if the current sensor is recieving enough voltage
|
|
|
|
|
- layout:
|
|
|
|
|
- Container layout is now better, the connectors have meaningful positions
|
2024-06-22 01:49:46 +02:00
|
|
|
- moved all connectors to the front including the debug header
|
